How to Make a Homemade Lava Lamp That Lasts Forever

This is a guide on how to make a homemade lava lamp that lasts forever so that you can have one for as long as possible. You will need the following materials water, food coloring, glycerin, and soap. The first thing you need to do is fill up the bottle with hot water. Once this has cooled down enough, add the soap into it and then shake it up until all of the bubbles are gone.

Add in three drops of food coloring before pouring in some glycerin (a little bit at a time). When you’ve added enough of it, pour it into your jar or whatever container you want to use and wait for about an hour before turning off the light switch; if there’s any leftover liquid after that, just pour out all of it. Read o to know more information!

How to Make a Homemade Lava Lamp That Lasts Forever

10 Ways on How to Make a Homemade Lava Lamp That Lasts Forever:

Here are some suggestions for making a lava lamp that will last forever, so you won’t have to keep buying new ones! This is very simple and easy. Of course, it takes a little more patience, but if you want a lava lamp that lasts forever, you can do this. Here are some suggestions for making a lava lamp that will last forever, so you won’t have to keep buying new ones! This is very simple and easy.

1) Buy a Lava Lamp Kit:

First, you can buy a lava lamp kit. The kits are very cheap, and they come with the bottle, wax, and other things that you need to make it work. You can find them at toy stores or sometimes even department stores.

2) A Lava Lamp from a Pringles Can:

If you don’t have enough money to buy a kit, go to any grocery store and ask for a pringles can. They will more than likely give it to you for free since they always have tons of them. Once you get the can, you will need to cut off 1/3 from 3 opposite sides of the can.

After cutting out the bottom 1/3, you’ll have a ring leftover. That is what creates a nice motion in your lava lamp. Now that you have all the pieces stack them together and add water to see if they work. If it doesn’t, you may need to tape the pieces together first before adding the water.

3) Glycerin Soap Solution:

Another idea is to mix glycerin soap, water, and food coloring in a mason jar with a thin metal screen on top. Add the mixture to the lava lamp base, and it should work. Change out the solution after about six months or when it starts looking cloudy.

4) Old-Fashioned Salt and Alcohol:

You can also make a lava lamp using salt and alcohol. Mix the salt with the alcohol in a small jar or large glass, and put it in your lava lamp base. Be careful, though, because this solution makes your lamp very hot. This should work well if you mix it correctly, but if not, mix equal parts water and alcohol.

Lava Lamp Using Salt and Alcohol

5) Change the Wax:

You can also change out your wax with a different color to make your lava lamp last longer. Just melt the old wax out and replace it with new colored wax. You should be able to find colored wax at most craft stores or even some grocery stores if you are looking for an easier way to make the lava lamp last forever.

6) Glycerin and Cornstarch:

Mix equal parts glycerin with cornstarch. Next, add the mixture to your lava lamp base, making sure you leave about an inch at the top of your glass clear for the next step. Finally, add a few drops of food coloring or dye to make it even more colorful. You should find glycerin at any drug store, and the cornstarch can be purchased at most department stores.

7) Bleach and Vinegar Solution:

Mix 1/3 cup bleach with 2/3 cups vinegar together in your lava lamp base. Pour the mixture into the lamp, and it should work like new again. If you want to make, your volcano look fuller, put some red or orange food coloring in a jar of bleach and vinegar solution before putting it in your lava lamp base.

8) Dish Soap and Water:

Mix dish soap and water in a mason jar with a metal screen on top. Put the mixture into your lava lamp base, and it should work. The only problem is that this might make your volcano look less colorful, but you can add coloring if you want it to be brighter. This works better when you put the water in first, then add some dish soap.

9) Vitamin B Complex:

Mix Vitamin B complex with water and put it in your lava lamp base. This should work better than some of the other solutions on the list, but you might have to add a little bit more if it doesn’t work for you. You should look for Vitamin B complex at any drug store.

10) Hair Conditioner and Water:

Mix hair conditioner and water in a jar with a metal screen on top. This is one of the best solutions to use because it works well, and makes your volcano look more colorful, and keeps your lava lamp from clouding up. This should work better when you put the water in first, then add some hair conditioner.

The Ratio of Water to Oil Is Not Very Important

Some Tips and Suggestions:

1. First off, you will need to find a way to obtain the ingredients such as pure oil and water that do not leave a residue. Distilled water and cooking oil work best. You can get distilled water from just about any grocery store, and cooking oils such as vegetable oil, baby oil, mineral oil, etc., work fine.

2. If possible, use an electric drill or some mechanical means to mix the water and oil. If you cannot use a drill, use a metal spoon; just be sure to stir it frequently and consistently.

3. The ratio of water to oil is not very important. As a general rule, use more water if the lamp seems to be burning out quickly. However, too much water will result in a thin, runny lava lamp with low viscosity. On the other hand, too little water will create a thick, syrupy one that does not flow easily. Some people like to use distilled water, while others prefer tap water.

4. When the lamp is working, it should remain pretty clear and transparent looking on top with bubbles of oil floating up through the water towards the top where they break apart, creating ripples of iridescent colors throughout.

If either layer becomes discolored or opaque, there are impurities in the mixture, and they must be filtered out. Use a coffee filter to remove any unwanted particles from the water and oil before attempting the steps again.

5. When you have finished creating your lamp, don’t forget to clean up after yourself! All of the materials used are non-toxic, so no unique disposal methods are required, place the used oil and water in a plastic container and put it out with the trash.

Don't Forget to Clean Up After Yourself


Try this simple recipe if you’re looking to make a homemade lava lamp that will last for years. Made of just two ingredients and with little effort needed in the preparation process, you’ll have hours of entertainment at your fingertips!  It’s also easy to clean up after since it doesn’t stain or leave any sticky residue behind, so everyone can enjoy their lava lamp without getting someone else in trouble.

With these quick-to-make lamps lasting forever by design, there’s no need to wonder why they’re so expensive in the store! We hope this guide helped give you information on how to make a homemade lava lamp that lasts forever! If you have anything to ask, feel free to comment below!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly