How to Get an Object Out of Shower Drain
Wet hair is often the culprit of clogging up your drain. Therefore, it is essential to know how to get an object out of the shower drain so you can continue to enjoy your morning or evening routine without dealing with a backed-up sink. There are many different ways that people have found that work for them.
But some tips include using baking soda and vinegar, boiling water, pouring hot water down the drains, removing the stopper from the drain, and trying to remove what is stuck in there with a plunger. The best way may be to call a professional plumber as they can figure out which method will work best depending on what has been stuck in your shower drain.
Summary: If you find an object stuck in a shower drain, there are a few things you can do to try and free it. First, turn off the water at the source by turning the knob on the sink or faucet. This will cause the water pressure in the drain to decrease, which may help dislodge the object. If that doesn’t work, you can try using a plunger. Put the end of the plunger into the drain and push and pull the plunger up and down.
8 Ways on How to Get an Object Out of Shower Drain:
1. Using Baking Soda:
It is very effective in getting rid of the shower drain smell. Pour some baking soda into the drain and let it sit for an hour or so. Then pour vinegar over it to mix the chemicals inside, resulting in a substantial amount of foam.
Make sure to be careful when using this method, as it can quickly bubble out. Let it sit for a couple of minutes before turning on the water to flush it all down. This will help eliminate the smell, and baking soda is good at clearing out clogs.
2. Using Drain Opener Chemical:
Use a drain opener chemical in the shower to start dissolving and scrubbing away at the clog. Keep pouring the chemical as you wash. This can take a long time, but it is effective. This is good if you have a problem that doesn’t seem to be clearing up.
3. Using Dish Soap and Hot Water:
Get your hair conditioner and mix it with your favorite dish soap. Then turn on the water, so it’s hot, and pours an entire bottle of this mixture into the drain. The hot water will cause the dish soap to produce a lot of suds, and the two combined will clear a clog. If this doesn’t work, try it again but add some baking soda into the mix. You can also use vinegar instead of dish soap if you have that around the house.
4. Using Plunger:
You can get rid of most clogs by using a plunger. First, ensure the water is turned on and pour some water into the shower. Plunge up and down with moderate force, and pull out quickly so there’s room for more water to go in. Repeat this until all of the gunk has been removed from your drain.
5. Using Liquid Plumber:
Using Liquid Plumber is a very effective way of getting rid of clogs. It works better than the baking soda and vinegar mixture and costs less too. Just pour it into your drain and let it sit for about an hour or two, then turn on the water to flush away all of the gunk in your drain.
6. Using Main Line Cleaner:
This is a type of chemical you can get from a hardware store and is very effective in clearing a clog. It eats away at the gunk in your drain, so use this if all previous methods fail. But be careful with it because it is very toxic and can cause harmful fumes. Just let it sit in the drain for a couple of hours before turning on the water, and make sure you rinse out all of those chemicals. If you don’t, they could corrode your metal pipes over time.
7. Using Metal Wire Coat Hanger:
This is probably one of the most common ways to get a clog out of your shower. The downside is that it can be somewhat dangerous, so ensure you always have a backup method lined up in case something goes wrong. You’ll need a wire coat hanger and some pliers. Straighten the hook end of the wire coat hanger until it is straight and stiff.
With the pliers, bend the straightened wire into a small circle to fit through the drain. Then use it to go fishing for the clog. You might have to do this several times before finally getting it all out, but keep at it, and you should be able to get it after a few tries.
8. Using Shop-Vac:
If you don’t mind letting your shower drain while doing other things that could take a while, this is the perfect solution. Of course, if there’s no clog in your drain, this method won’t work. But if there is one, turn on the water in your shower and use either the jet or spot attachment of your shop-vac to suck out all of that gunk clogging up the drain. Once the water starts flowing freely again, turn off your shop-vac and let it drain. You can also use a plunger with this method if you want.
You Can Check It Out to Shower With Dreads
Some Tips and Tricks:
1. If the drain is clogged, remove the hair and gunk first. Then, use a wire hanger or something similar to fit through the small hole and push it through.
2. A plunger usually works best for toilets and sinks because of its flat bottom. If plunging doesn’t work, remember that some particles may block the pipe. If a plunger doesn’t work, use a wire hanger to clear the blockage manually.
3. Try snaking it with a wire loop at one end of a coathanger formed into about five loops.
4. If all else fails, use tongs! However, be careful; the tongs may scratch the shower tile.
Conclusion:
The best way to get an object out of a shower drain is with the help of a plunger. Place the rubber cap over the hole in your toilet and push down, creating suction that will pull anything stuck inside up through the pipe. If you don’t have access to one or are afraid it won’t work on more stubborn objects, try using boiling water poured directly into the drain while simultaneously covering it for 30 seconds-this. Should loosen any clogs.
For small objects like hairballs, simply use tongs to lift them out! We hope this blog post on how to get an object out of the shower drain has been helpful. If you need other tips on this topic, let us know! We would be happy to help.