How to Unwind a Clock

To understand how a clock works, you have to understand the main components of a clock. A clock is made up of three main parts: the escapement, mainspring, and gear train. The escapement controls the gears’ speed by giving them little pushes between each rotation, so they don’t slow down too much or speed up too quickly.

How to Unwind a Clock

The mainspring provides power for both itself and drives the gear train, which turns all of its wheels using energy. There are many different kinds of clocks with different movements, but they all work on this same principle! So if you want to know how to unwind a clock, keep reading this blog post until the end!

Steps to Follow: How to Unwind a Clock

Step 1 :

Go to the clock and find the knob that holds in place two ends of a metal coil. Unscrew it to remove this knob from your clock altogether, then set it aside where it can be safe for later use.

Step 2 :

Take one end of the wire from your hand and slowly begin to unwind it from around the clock’s hands.

Step 3 :

Away from the clock, wrap the wire over and around the screw removed in step one. You should have at least 24 inches of wire wrapped around this screw to correctly turn into a key for your clock.

Screw to Correctly Turn Into a Key for Your Clock

Step 4 :

After you’ve wound enough wire around this screw, cut the wire off of your spool with scissors to be placed at least 1 inch away from this screw.

Step 5 :

Take the other end of the wire from your hand and slowly begin to unwind it from around the clock’s hands.

Step 6 :

Away from the clock, begin to wrap wire over and around the screw removed in the previous step. You should have at least 24 inches of wire wrapped around this screw to turn into a key for your clock properly.

Step 7 :

After you’ve wound enough wire around this screw, cut the wire off of your spool with scissors to be placed at least 1 inch away from this screw.

Step 8 :

Connect both ends of the wire you removed from the clock earlier, so they are connected with no gap between them at their 1-inch distance. Your wire should look something like a key now.

Your Clock's Hands, Then  Stop Twisting These Ends

Step 9 :

Begin to twist together both ends of this wire at their 1-inch gap, twisting them together for about 1.5 inches to create a secure enough lock around your clock’s hands, then stop twisting these ends of the wire together. Let the rest of this key dangle loosely from the hole where your original knob was held in place by the coil.

Step 10 :

Attach one end of your new key to the clock’s hands, then wind this key around the clock’s hands to discover if it still runs.

Step 11 :

If your clock winds back up after you’ve wound your new key around it, put on the other end of this newly made key and add a screw knob over its opening, holding both ends of the key together with the screw knob.

Step 12 :

If your clock does not rewind after you’ve wound your new key around it, undo the last few steps of winding this key around the clock by unwinding both ends of this key (you may need to use it, pliers for this purpose). Then, take out any extra length of wire at both ends of this wire, and use a soldering iron to remove any frayed edges at these wire ends.

Step 13 :

If you do not have access to a soldering iron, wrap electrical tape around each end of this key’s loose wires. You should now be able to rewind your clock up with your new key.

 Your Clock Up With Key

Some Tips and Suggestions:

Here are some tips and advice on how to unwind a clock.

1. If you can, take a picture of your clock’s insides before attempting this. This will help you remember how the gears are oriented and make it easier to put back together.

2. Be careful! The small pieces might fly off and be hard to find without a good picture as a reference.

3. If you don’t want to rewind the clock, you can remove all of the gears and then put them back into their original positions when you are finished.

4. The arms that hold the hands onto the clock will most likely have a nut on each side that must be removed before detaching from the clock’s body.

5. If your clock has moving hands and you want to see the gears while they move, remove the glass first.

6. Be careful with all of the pieces! They can break easily, so handle them carefully and if you need extra help carrying them, place them in a small container or zip lock bag.

7. Don’t forget any tiny screws or nuts from the body of your clock.

8. If you want to paint your clock a different color, do so before putting it back together!

Things to Consider Before Unwinding a Clock:

  1. Keep a lookout at your window or door.
  2. Ensure that the clock is not wound too tightly against the wall, particularly if it has an exposed spring.
  3. Wind up one layer of coils at a time (so as not to risk snapping the spring). This way, you can unwind it slowly and avoid any problems that may occur.
  4. Unwind the clock in small numbers of coils (approximately 2) at a time, rewinding it fully after removing two to three layers!
  5. Avoid pulling too fast as you could potentially damage or break the spring entirely!
  6. Ensure that any parts of the clock (such as its face or hands) don’t face the wall as you will not be able to see them.
  7. Keep a close eye on your progress!
  8. Ensure that any other people or things in the room are out of harm’s way.

How Do You Release the Tension on a Spring?

The structure of a clock springs in an uncompressed state. The inner end of the mainspring coils into the center arbor, which is attached to the center wheel. The outer end is attached to the escape wheel, which, when in motion, releases the spring’s energy through a series of levers and pulleys to turn the hands on a clock face.

The Structure of  a Clock Springs

The key to releasing a mainspring is knowing how it fits into the arbor, connecting it to the center wheel. Caring for your clock requires that you be able to remove and replace the mainspring properly. The center arbor must be long enough so that the mainspring does not compress when installed, or it will affect time-keeping accuracy after you wind it up.

Conclusion:

If you want to know how to unwind a clock, there are some easy steps. First, you can take apart the clock by removing any screws on its back and removing the hands with gentle force until they come off. Next, use an old toothbrush or soft-bristled paintbrush to clean out all the dust that has collected over time since your last cleaning.

Remove any rust from metal parts using steel wool dipped in vinegar; be careful not to scratch them up too much! Then, put everything back together again once satisfied with its appearance. Don’t forget about lubricating anything like springs or teeth for longevity’s sake! If you’re ready to finally put an end to that annoying ticking sound in your home or office, we recommend st

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo