How to Smooth Rough Concrete Patio
Concrete is actually one kind of user-friendly material. It doesn’t only allow you to build skyscrapers but also for making simple and beautiful patio in your backyard. You might have seen several types of concrete patio, and maybe you have got yours too. But have you ever wondered why the rest of the patios have a smooth surface, except yours? Generally, it happens because the concrete wasn’t poured into it properly. It is not your fault; you might have hired a wrong person who didn’t work perfectly or have got the appropriate skill for giving the work perfection. There is nothing you can do instead of taking care of this by yourself. So, how to smooth rough concrete patio?
The strength and longevity of concrete are literally outstanding. That’s why every house owner prefers to use it for different purposes, including patio floors. Maybe you are also one of them. But there are several reasons that can make hamper the outstanding look of your patio floor. It doesn’t mean that your new and smooth looking patio floor will not become rough tomorrow. We have stated one of the main reasons, but some natural elements are also responsible for hampering the look of these floors. These are mainly foot traffic, water erosion, dust, etc. No matters what the reason, we are here to show the exact way to retain your concrete patio’s youth for a long time. Below you will get some simple steps for making a rough concrete surface smooth and beautiful. Let’s dive in!
Summary: If your concrete patio is looking rough and bumpy, there are a few easy steps you can take to make it look smoother and more polished. First, use a power washer to clean the surface of the patio. Next, use a coarse sandpaper to remove any bumps or lumps. Finally, use a sealant to protect the surface and keep it looking good for years to come.
How to Smooth Rough Concrete Patio
You are thinking about whether a task will be easy or hard. You think it will be easy because it is inexpensive and you won’t need bulky tools.
Step 1
To clean concrete, you need to scrub it with a concrete cleaner. You can choose an eco-friendly concrete cleaner to make sure it doesn’t damage the concrete. Apply the cleaner and then rinse it off with a hose.
Step 2
It is not very likely that you will be able to evacuate a cast iron sink by yourself. Try not to try and consider hauling that thing out without anyone else. It is excessively overwhelming for one individual to deal with.
Step 3
After wetting your concrete patio, start applying the resurfacer. Fill in any concavities with the resurfacer, using a trowel or other smooth concrete accessory. Once you’re finished, check to make sure you haven’t missed any spots. Let the resurfacer dry for at least two hours.
Step 4
After two hours, the resurfacer will become a bit firm. Once you have reached that level, it is time to mist the patio. In this case, you can use a gardening hose for misting the patio with water. Equip a sprayer attachment with the hose and start misting you’re the surface.
Step 5
Once you have completed the above process, you have to now work with a large batch of resurfacer. So, mix it up and then pour it onto every small section of the patio. Make sure to do this at a time without taking much time. After that, take a trowel and start to smooth the resurfacer. In this case, you have to skate it over the resurfacer by holding it in a slightly angled position.
The angle of the trowel should be positioned in such a way in which the uplifted points away from the direction. Don’t forget to re-wet the concrete or to moisten it by water if needed. Continue the process until the entire surface becomes smooth.
Step 6
When you will complete doing this to the entire surface, leave it overnight so that it becomes completely dry.
Frequently Asked Questions
What Can I Use to Smooth Out Rough Concrete?
There are many ways to smooth out the concrete. For example, you can use sandpaper, wire brushes, and a scraper.
However, one of the best ways to smooth out concrete is by using a power washer. The pressure from the water on the concrete causes the surface of it to be smoothed out over time.
Can You Sand Down Concrete Patio?
It is not possible to sand down the concrete patio, but it can be quickly done with a wire brush. The first step in the process is to clean the surface of the concrete by using a hose and water to remove any debris or dirt from the surface.
Next, you need to apply a sealant to protect against stains and cracks that may appear on your patio. Finally, after applying the sealant, use an angle grinder or other power tool with a wire brush attachment to remove all unwanted particles from the surface of your patio.
Can You Grind Concrete to Level It?
No, grinding concrete is not a feasible option.
Grinding concrete would lead to cracks and may result in the creation of uneven surfaces. The edges of cement might also be chipped off during the process.
How Do You Grind Down Concrete?
The process of grinding down concrete is not as difficult as it seems. It all depends on the tools you have at your disposal and the time that you have to invest in grinding down concrete.
There are many tools that can be used for this purpose like:
- A sander – This tool is perfect for cutting off small pieces of concrete from larger pieces, especially if you need to do it quickly.
- An angle grinder – This tool will work well for grinding large surfaces but may be less suitable for fine adjustments and detail work.
- A power drill – If a more powerful motor is needed, then a power drill would be the best option available.
Conclusion
Hopefully, you have understood these simple tactics, and from now on, you won’t have to ask anyone how to smooth rough concrete patio. If you got something more enhanced, don’t forget to use the comment section below.
