How to Remove Wiper Arm Without Puller
Many people are not aware that there is a tool specifically designed to remove wiper arms from their posts. This is often because the puller is not included in most standard toolkits. If you have ever tried to remove the wiper arm from your car, you know it can be a real pain.
The standard way to remove this part is by using a puller, but if you don’t have one or it’s broken, there is another way. This blog post will show you how to remove wiper arm without puller. Stay safe and good luck!
10 Easy Ways on How to Remove Wiper Arm Without Puller:
1. Use Pliers to Grab the Blade:
Grab a pair of pliers, place them on the blade, and then pull. If the pliers do not have a good enough grip, use a cloth between them to provide more friction. Do this all around the blade until you can get a good grip. Be sure to get both sides of the blades because they are usually different sizes.
2. Use a Screwdriver:
Screwdrivers can be used in place of pliers and will work the same way but provide more control. Place them on either side of the blade and pull or twist until one falls off. If you cannot get a good grip and need more leverage, place a cloth over the screwdriver and do the same as you would with a pair of pliers.
3. Bend the Blades Backwards:
Another way to remove a stubborn wiper blade is to bend it back and forth until it snaps off simply. Although this will not work on all blades, it works on most standard ones where the middle of the blade is straight. Get a large screwdriver and place it under the blade, then with all your might, bend the blade back and forth until you feel it pop off.
4. Carefully Swing the Wiper Away From the Window:
If you need to get a stubborn wiper arm off and the blades will not pull off or bend back, try using some brute force. Get a sturdy screwdriver and place it next to the wiper arm close to the window. Then with one quick motion, push outwards on the screwdriver towards the window; doing this should swing the blade away from the window and break it free.
5. Use a Rubber Band:
If you are low on tools but happen to have a rubber band handy, use one of those! Place the rubber band around the blade very tightly until it contacts the arm underneath. Then pull it towards you as hard as you can until one side breaks off. Do this until the blade comes off completely.
6. Ask Someone for Help:
If you need to remove a wiper arm and have no tools or rubber bands, simply ask somebody for help. Most people will be happy to help and not think twice about it, but if they refuse, you should take that as a sign that they’re not right for you.
7. Pull Out the Locking Clip:
The locking clip is a little piece of metal that holds the blade to either side of the arm. If you cannot get a good grip on the blades and need more leverage, this is what you should try next. First, pull out one side until it comes off, then continue doing this until both sides come off.
8. Use WD-40 to Loosen the Blade:
If you need to get a blade off but cannot get a good grip on it, try using WD-40. First, spray some down either side of the blade and wait for about 30 seconds before pulling or twisting until one falls off. You can spray more WD-40 directly onto the locking clip if this does not work.
9. Turn the Arm Upside-Down:
Try turning the arm upside-down if you need to remove a blade but cannot get a good grip. This will make it much easier to get a good grip with your hand, but be very careful not to let go, or the blade might fly off.
10. Get a Wiper Removal Tool:
Last but not least, if you need to remove a blade and have absolutely no ideas what to do next, it looks as if you are out of luck because nothing else will work. However, a special tool can be used to remove wiper blades with ease. This tool uses an “L”-shaped piece of metal that clamps onto the arm and allows the blade to be slid right off.
What Are the Benefits of Using a Wiper Arm Removal Tool Instead of a Puller?
You don’t need a puller to take off wiper blades. That’s an old wives’ tale, and it isn’t true. If you want to keep your wiper arm in place, though, a tool makes life much easier.
The blade will stay attached without crimping the arm or paddle switch mechanism underneath the hard plastic cover. You can often remove the blade with a too, but make sure it’s the right size before you start pulling on your wiper arms.
Other tools will do the job just as easily if it isn’t. For example, if you have a wiper arm puller, use it. There is no reason not to. But don’t bother buying one if you want to save a buck or two. A simple coat hanger will work as well, and then you can give the new tool away as a gift on that special day.
Conclusion
When you need to remove a wiper arm without using a puller, there are several ways to get it done. One option is using an old credit card or pullar as leverage on one side of the arm while twisting and lifting with another hand. You can also try inserting two screwdrivers into the holes at each end of the rubber blade for more control over how much pressure is applied by pressing down on both handles simultaneously.
It may take some trial and error before finding just the right technique that works best for your specific situation, but if you’re in need, don’t hesitate to give these ideas a try! We hope this blog post on how to remove wiper arm without puller has been helpful. If you have any questions or want to know more, then feel free to comment below!
You Can Check It Out to Drain Transmission Fluid Without Dropping the Pan
Louis Wein
Louis has always been fascinated by cars. He loves the way they look, the sound of the engine, and how they make him feel when he's driving. He is always keen to learn more about different mechanics of cars and how the engine contributes to other aspects of the car. As an automotive technician with over 10 years of experience, he knew how they worked and loved taking them apart to see how they went back together. He was especially interested in the mechanics of combustion engines and loved finding ways to make them more efficient. He loves to work on cars and help people keep their vehicles running smoothly. As a senior editor, he enjoys contributing to Diy quickly because it allows him to share his knowledge and expertise with others.
