How to Fix Sandpaper Feel in Hot Tub

June 25, 2023 0

If you’ve ever stepped into hot tub water that feels like tiny grains of sandpaper, you know how unpleasant the experience can be. But don’t despair – there is a solution!

In this blog post, we’ll discuss all your options for how to fix sandpaper feel in hot tub and provide some helpful tips to help ensure it never happens again. So whether you’re having an issue with grittiness or just want to make sure it stays away in the future, dive into this article and learn what steps you can take today to get rid of those pesky sand particles once and for all!

What is the Reason Behind the Sandpaper Feel in Hot Tub?

The sandpaper feel in a hot tub is usually due to dissolved minerals from the fill water. These can be calcium, magnesium, and other trace elements that are not removed when the fill water is treated or filtered. The minerals will precipitate out of the solution as the hot tub’s temperature rises, creating a gritty feeling to the water. It can also cause build-up on surfaces inside the hot tub, resulting in a cloudy or even greenish hue.

Can You Fix the Problem Yourself?

Fortunately, it is possible to fix the problem yourself with a minimum of effort. The first step is to turn off the hot tub and let the water sit for at least an hour so that any suspended particles can settle. Then, use a fine mesh filter or cartridge filter to catch any remaining particles before you begin draining the hot tub.

Needed Tools

Once all of the sediment has been removed, you’ll need to do a thorough cleaning of the hot tub. You’ll need a few tools to help with this task:

A filter cleaner or degreaser
A nonabrasive scrub brush
A high-pressure hose
White vinegar or citric acid for cleaning

10 Steps on How to Fix Sandpaper Feel in Hot Tub

Step 1: Drainage

Drain all the water from the hot tub. It is an important step and should not be overlooked. Water must be completely drained for the cleaning process to be effective.

Step 2: Cleaning

Use a filter cleaner or degreaser, scrub brush, and a garden hose with a high-pressure nozzle to clean the inside of your hot tub. Make sure that any surfaces are wiped down to get rid of any dirt and debris.

Step 3: Rinse

Rinse the hot tub thoroughly with water to remove any remaining cleaning solution. Cleaning agents can be extremely damaging to the hot tub if left behind. Be careful not to leave any spots behind.

Step 4: Soak

Soak the inside of the hot tub with a mixture of water and white vinegar or citric acid. This will help break down any mineral deposits that may have been left behind by the fill water. Allow this solution to sit for 15-20 minutes before draining it out.

Step 5: Scrub

Once the hot tub is drained, use a clean, nonabrasive scrub brush to remove any remaining mineral deposits. Be careful not to scratch or damage the surface of the hot tub. Scrubbing too forcefully can cause damage.

Step 6: Rinse Again

Rinse the hot tub one more time with a garden hose to remove any remaining residue from scrubbing. Make sure that all areas are completely rinsed and dry before moving on to the next step. It will help to prevent water spots or damage.

Step 7: Fill

Fill the hot tub with clean, treated water. Make sure that all of the fill lines are securely attached and that all areas of your hot tub have been filled properly.

Step 8: Test

Run a test strip on your hot tub’s water to make sure that the correct balance of chemicals has been achieved. You should also check for signs of sandpaper feel in the water, as this could indicate further problems.

Step 9: Heat

Turn on your hot tub and set the temperature to the desired level. Allow it to heat up completely before using it again. Monitor its condition during this time and make sure that there are no signs of sandpaper feeling when the water is hot.

Step 10: Enjoy!

Once your hot tub is at a comfortable temperature, you can finally enjoy it again without worry of a sandpaper feel in the water! Make sure to maintain its cleanliness by regularly checking the chemical balance, draining and refilling the water, and giving it a good scrubbing every once in a while. That way, you can rest assured that your hot tub will be ready for you whenever you need it.

By following these steps, you now have the knowledge of how to fix sandpaper feel in hot tub so that you can enjoy your hot tub without worrying about any further problems! With the right knowledge and tools, you can always make sure that your hot tub is a safe and enjoyable environment.

8 Safety Precautions to Follow

Make sure you disconnect the power to the hot tub before attempting any repairs. Disconnecting and turning off the power to the circuit breaker is essential for preventing electric shocks or electrocution.
Test the pH level of your hot tub before beginning any repairs. The ideal scenario would be a range between 7 and 7.6 on the pH scale, but anything around 6 or 8 can still work in most cases.
Empty the hot tub of all water, and ensure that it is drained completely. This includes any residual water in the pipes or other areas of the hot tub.
Use a sponge or some type of soft scrubber to remove any particles from the walls and flooring of your hot tub. Pay special attention to corners and cracks, as these are common spots for dirt and debris to accumulate.
Use a mild cleaner or dish soap with warm water to wipe down the entire hot tub surface and clean it thoroughly. A mild cleaner is a much better choice than strong, abrasive cleaners, which can damage your hot tub.
Rinse the hot tub with fresh, cool water that is free of chemicals or residue from cleaners. This will ensure all residues are removed prior to refilling the hot tub. Be careful about splashing any water on the electrical components of your hot tub.
Refill your hot tub with fresh, cool water, making sure to follow the manufacturer’s instructions for how much water is needed. The instruction manual should have an exact measurement for the desired water level.
Balance the pH level of the hot tub and make sure that it is between 7 and 7.6 on the pH scale before you turn it back on. This will help ensure that the sandpaper feel is gone once you turn the hot tub on.

Following these steps can help you fix any sandpaper feeling in your hot tub and make sure it’s free of dirt and grime before using it again. Make sure to keep up with regular cleaning procedures after repairs are made, as this can help you maintain a healthy hot tub environment.

Additionally, if the sandpaper feel persists after following these steps, it may be time to contact a professional for further assistance. Do not attempt any repairs on your own if you are unfamiliar with hot tub maintenance, as this can lead to serious injury or damage to the unit.

Cost of Fixing Sandpaper Feel in Hot Tub

The cost of fixing any sandpaper feel in a hot tub will depend on the type of repairs needed and how much time it takes to complete them. If you choose to do the repairs yourself, the main costs would be for supplies such as cleaning products, pH balancers, or replacement parts if necessary. Depending on the severity of the issue, it may also be necessary to contact a professional for assistance.

If you hire someone to repair the hot tub, the cost will depend on their experience and hourly rate. It’s important to weigh the costs of doing it yourself versus hiring a professional before beginning any repairs. Doing so can help you save time and money in the long run. Remember to follow all safety precautions to ensure that the repairs are done safely and correctly.

Conclusion

After trying these steps on how to fix sandpaper feel in hot tub, if your hot tub is still feeling sandy, it may be time to consult a professional. Taking care of your hot tub on a regular basis will help ensure that it runs smoothly for years to come.

Overall, fixing sandpaper feel in a hot tub is a relatively easy process that can be completed with the right supplies and some patience. Following the above steps can help you get your hot tub back up and running much quicker than if you had to call in a professional for assistance. Just make sure to follow all safety precautions when performing any repairs, and you should be good to go. Good luck!

Angela Ervin

Angela is the executive editor of DIY quickly. She began her career as an interior designer before applying her strategic and creative passion to lifestyle and home. She has close to 15 years of experience in creative writing and online content strategy for housekeeping, home decorations as well as other niche efforts. She loves her job and has the privilege of working with an extraordinary team. She lives with her husband, two sons, and daughter in Petersburg. When she's not busy working she spent time with her family.