How to Get Rid of Fringe on a Rug
If you have a rug that has fringe on it, it can be hard to get rid of. This is because the fringe is attached directly to the main part of the rug and not sewn in. In this blog post, we will cover how to get rid of fringe on a rug. To remove your fringe, there are some steps that you need to follow so that you do not ruin your rug while attempting this task.
The first thing you should do is to cut off all of the fringes from both sides with scissors or a rotary cutter, if necessary. Do not pull them off by hand, as they may come undone and result in loose strings all over your floor. Once you have done this, make sure any excess string or thread has been removed from inside of the material itself before moving on to the next step, washing. Continue reading this blog post to know all the information!
10 Ways on How to Get Rid of Fringe on a Rug
1. Trim the Fringe
While your fringe may have been a cute detail when you were buying your rug, at some point or another, you may decide that it’s time to get rid of it. If this is the case, there are a few different ways to remove the fringes from your rug. One way is to use a sturdy pair of scissors and cut the fringe off of your rug. This is more time-consuming than some other methods, but it gives you the best results.
2. Burn It Off
Another way to remove fringes is to light up a match or lighter and hold the flame close enough that it starts to burn one part of the fringe. Continue this until all of the fringes have been burned, and then use a pair of scissors to cut off any remnants. A word of caution is to be very careful when you’re burning your rug; burning is always a risk, especially with such an open flame as a lighter or match.
3. Glue It Off
One way to remove fringes from your rug is to use a solid adhesive and glue it off the material. This can be done by using a specially formulated product that will dissolve the fringe without causing any damage to your rug. Once you’ve got the excess fringe covered with the adhesives, you should wait at least 4 hours before attempting to remove it, or else the adhesive can leave stains or damage to your rug.
4. Shave It Off
A less dangerous way to remove the fringes from your rug is to use an electric shaver and carefully shave it off. Just like with gluing, you should wait at least 4 hours before attempting this one, just in case there are any problems that you have to deal with after removing the fringe.
5. Drip It Off
To drip the fringe off of your rug, you’ll need to soak it in warm soapy water. You can then use a pair of scissors or an Exacto knife to remove any excess material carefully. The only drawback of this method is that you can’t put too much pressure on your material when cutting the fringe; otherwise, you risk damaging the rug.
6. Use a Heat Gun
Another way to remove the fringe from your rug is by using a heat gun. To use this method, you’ll need to slowly pull the fringe at an angle until it’s all off of the rug. Once you’ve removed as much as you can by hand, go back over it with your heat gun and continue working until you can’t pull any more off. This is one of the safer methods, but it only really removes the fringe from the surface of your rug.
7. Douse It
Another way to remove fringes from your rug is by using a spray bottle filled with vinegar and water. The mixture will dissolve the fibers in the fringe, allowing you to cut them off of the other material. This method works best if you’re planning on also replacing the fringe; although it won’t harm your rug, any damage that you do with this method will still be there when you’re done.
8. Use a Razor Blade
You can use an Exacto knife or razor blade to shave off any excess fringe carefully. Be careful not to cut the backing of your rug, as this could cause problems later on. Like using a heat gun, you may still have some fringes left after using this method, but it will make cutting easier.
9. Vinegar and Washing Machine
You can use a washing machine to remove fringes from your rug. Just put your rug into the washer, fill it with warm water and a cup of vinegar, and let the cycle run as normal. Although this method works well, you’ll probably still have some stains left behind after washing your rug.
10. Scissors and Exacto Knife
Using a sturdy pair of scissors and an Exacto knife, you can carefully cut off any excess fringe from your rug. This is another method that leaves behind some stains after being used, so be prepared to take care of them later on if necessary.
Some Tips and Suggestions
1. Use a pair of sharp scissors and run the blades along the frayed edge, cutting off as much loose fiber as possible.
2. If you can’t cut it off as described above, use your fingers/hands to pull out as much of the fray as possible. Afterward, go over those areas with scissors or a razor blade.
3. You can also use a wire brush or wire wool to brush the fringe down if you cannot cut it off with scissors. While doing this, slightly twist the bristles of your brush one way and then the other to remove as much loose fiber as possible.
4. Try brushing with a non-metal brush, such as one for hair.
5. Don’t use any form of heat to remove the fraying. You can scorch or burn your rug, which could ruin it completely. Instead, trim off any loose bits of leftover fabric with scissors or a razor blade once the fringe is removed. If necessary, shave away at the backing on the underside of your rug with a razor blade to remove any fraying.
Why Should You Get Rid of Fringe on a Rug?
If you have a fringe rug, the fringes can fall out and start to look messy over time. A new, fresh fringe will give your rug a more updated and pulled-together appearance. Getting rid of fringe on a rug is economical as well as aesthetically pleasing.
If you plan to keep the same area rugs but update them with a new fringe, removing the old fringes will allow you to use the rugs in different rooms of your home. You can also remove fringe on a rug to make your area rugs more manageable and easier to clean.
Conclusion
With these simple steps, you can get rid of the fringe on your rug in no time. If this sounds like something you would like to do, here are some pointers for going about it. First, vacuum off the loose fringe and then use scissors or a razor blade (putting safety first!) to cut through any stubborn strands leftover.
