How to Get Creases Out of Polypropylene Rug
Many people are surprised to find out that polypropylene is a synthetic fiber. It doesn’t snag or shed like wool, it’s easy to clean and maintain, and it will last for years if properly cared for. Polypropylene rugs are among the most popular types due to their low cost and high durability.
However, they can also be prone to creasing if not cared for properly. That said, the biggest problem with this material is that over time creases can form in the rug due to high foot traffic or improper storage. So here are some tips on how to get creases out of polypropylene rug!
10 Ways on How to Get Creases Out of Polypropylene Rug
1. Use a Steamer:
Steam is your best friend when it comes to getting out creases, especially if you are hesitant about touching the rug with an iron or steam cleaner. Instead, use a good-quality steamer, hold it several inches above the rug, and move it back and forth across the material. This usually takes about five minutes of having the steamer in each spot.
2. Use an Iron on Polypropylene Rug:
If you do not have a steamer on hand, you can also iron with polypropylene rugs. Turn the iron to the lowest setting that is appropriate for your rug’s fiber content. Steam will come off the material as you go, so be careful not to burn your hands. Move the iron across the rug in straight lines, being careful not to hold it in one spot for too long.
3. Use a Dry Cleaning Solvent:
If you do not have access to either a steamer or an iron, then there are also dry-cleaning solvents that you can buy that will dissolve the creases out of polypropylene rugs. Apply it with a cotton swab and let it sit for five minutes before wiping it away with a damp cloth.
4. Use a Dry Cleaning Cloth:
If you have neither a steamer, nor iron, nor access to dry-cleaning solvents, then you can use a dry cleaning cloth that is safe for polypropylene fibers to get the creases out. Then, simply rub it in circles over each wrinkle until it is gone.
5. Take it to the Cleaners:
If all else fails, take your polypropylene rug to a cleaner that can steam or dry clean the material. They will be able to use professional-grade equipment to remove even the most stubborn creases from your rugs.
6. Use Baking Soda and Vinegar:
Mix baking soda with water to form a paste and then spread it onto the affected area of your polypropylene rug. Let it sit for five minutes before you scrub it away with a damp sponge. Do not let the baking soda mixture dry on the material, making the stain harder to remove.
7. Use Borax:
Borax is another household product that you can use for this purpose. First, mix it with water to create a paste, and then spread it onto the affected area of your rug. Let it sit there for ten minutes before scrubbing at it with a damp sponge or cloth; then rinse the area thoroughly with water to remove any excess Borax.
8. Use Alcohol:
Mix one tablespoon of isopropyl alcohol with two cups of water in a spray bottle, and then spray the affected area of your polypropylene rug. After five minutes, wipe it away with a damp cloth or sponge. Repeat this process if necessary until the crease disappears completely.
9. Use a Magic Eraser:
A magic eraser is one of the most accessible home remedies that you can try when getting out creases from polypropylene rugs. However, it may take several applications before the crease is completely gone. Just dampen the magic eraser and use it in circles on any affected areas of the rug. If it starts to dry out, wet the sponge and continue using it until you no longer see any creases in your rug.
10. Use WD-40:
Spray a small amount of WD-40 directly onto an affected area of your polypropylene rug and let it sit for five minutes before scrubbing it away. Be sure not to let the WD-40 dry on the rug, as this will damage the fibers and cause permanent wrinkling.
Steps to Follow: How to Get Creases Out of Polypropylene Rug
Step 1:
Make sure your rug is clean before getting creases out of the polypropylene rug. A dirty rug will only make the problem worse.
Step 2:
Do not iron, steam, or dry-clean your polypropylene rug if trying to remove creases yourself. Instead, set up a fan near where you are working.
Step 3:
Position your rug so that it is lying flat. If the crease in the rug has a lot of giving, gently work it out with your fingers. If there is no give in the rug you will need to use a tool to get the crease out. Use a spoon and carefully work down into any soft part of the crease and gently pull up. Do not to tear or rip into your rug. Instead, keep working at it until you get as much as possible out of the carpet.
Step 4:
Spray a little water into the crease to add just a bit of moisture and work it in with your fingers. Be careful not to get your rug too wet because this will damage it further.
Step 5:
Lay your rug flat and place heavy objects along the line or crease you want to go. If there is no give in the rug, this will have to do. Leave the objects there for three days before attempting to remove them.
Step 6:
Spray your rug with water, then cover it with a damp towel and place heavy items along the line or crease you want to go. Leave this in place for 12 hours, then work your way down the crease, working out as much of the crease as possible.
Step 7:
Place a damp towel or rag on your rug and lay a hot iron, steam iron, or hairdryer over the area for about 15 seconds to get rid of any remaining creases in your polypropylene rug. Repeat this process if necessary until you have worked all the creases out of your rug.
Step 8:
Hang your rug outside in a sunny location to dry it entirely if you have worked moisture into the rug while trying to get creases out of it. This will help prevent mildew from forming on the rug and eliminate any remaining wrinkles that may not have come out during the process.
Some Tips and Suggestions
1. Iron the rug on a high setting to melt the fibers together. This will reduce the waves in your rug. If you are worried about scorching or melting your rug, lay a towel over it first.
2. Do not use fabric softeners when washing polypropylene rugs. Fabric softeners decrease absorbency, and this can cause the rug to mildew.
3. Vacuum your polypropylene rug often, and beat it out outside once a month or so to remove dirt and debris.
4. If you need to wash a large area rug, use the bathtub. Fill the tub with some soapy water and let the carpet soak for a while. Rinse thoroughly, then hang over a railing or shower curtain rod to dry.
5. Any mild soap can be used on polypropylene rugs. Do not use benzene, thinners, bleach, ammonia, or any other harsh chemicals which could weaken the rug fibers.
6. If a rug has a large amount of chewing gum or tar on it, do not try to scrape it off with a sharp instrument, as this could damage the fibers.
Conclusion
If you need to get your rug creases out, try the following tips. First, use a vacuum cleaner with an upholstery attachment or hand-held hoover to suck all of the air and dirt from deep in the folds of your rug. Next, spray warm water on deep areas that are still dirty and let it soak for ten minutes.
Afterward, take one side of the rug over another, so both sides stay wet while they dry together. You can also place heavy objects like books or furniture atop them if necessary until they dry completely! We hope this blog post on how to get creases out of polypropylene rug has been helpful. Let us know your thoughts in the comments below!
