How to Move a Dead Electric Pallet Jack

If your electric pallet jack breaks down, you may be wondering how to move it. This guide will show you the best way on how to move a dead electric pallet jack. First, make sure that the jack is turned off and unplugged. Then, find a sturdy surface on which to place the jack.

How to Move a Dead Electric Pallet Jack

If you cannot lift it by yourself, ask someone for help. Next, use a dolly or hand truck to wheel the jack over to its new location. Finally, re-plug the jack in and turn it on before using it again. Keep reading for more tips!

8 Ways on How to Move a Dead Electric Pallet Jack

1. Use a Forklift

Forklifts can be used to move pallet jacks that have died. The forklift driver will need to use the forks to lift the pallet jack and transport it to the desired location.

2. Use a Tractor

A tractor can also be used to move a dead electric pallet jack. The tractor driver will need to attach the pallet jack to the back of the tractor using chains or belts. The tractor driver will then transport the dead electric pallet jack to its desired location.

3. Use a Crawler Dozer

A crawler dozer can be used to get a dead electric pallet jack out of tight areas or impossible to get to spots. The dozer driver will need to attach a chain or cable to the pallet jack and pull it out of the spot.

4. Use a Winch

Use a Winch to Pull the Pallet

If there is no way to get to the dead electric pallet jack, a winch can be used to pull it out. The winch operator will need to attach a cable to the pallet jack and pull it out of the spot.

5. Use a Pulley System

A pulley system can be used to move a dead electric pallet jack. The pulley system will need to be attached to a sturdy structure, and the pallet jack will need to be attached to one end of the system. The other end of the system will be connected to a vehicle or tractor. The vehicle or tractor will pull the pallet jack to its desired location.

6. Use a Chain

If none of the above methods work, you can use a chain. Place the chain around the base of the jack and attach it to a vehicle or another object. Be very careful when doing this, as the jack could fall on you if it starts moving.

7. Use a Tow Strap

If all else fails, you can use a tow strap or winch to pull the jack off of the pallet. Attach the tow strap to your vehicle and place it around either end of the pallet jack. Then, slowly drive forward until the dead electric pallet jack has lifted free from the pallet.

8. Use a Tree Branch or Pipe

Use a Sturdy Tree Branch Pull the Pallet

This should be very easy to do if you are in the woods. Find any tree branch that is sturdy enough to support your weight and use it as a lever to pop the dead electric pallet jack free. If there are no trees around, but there is a pipe, use the pipe as a lever.

Some Tips and Suggestions

  1. 1.If you want to move a dead electric pallet jack, try doing it by hand.
  2. If you have a manual pallet jack, use that instead of an electric one.
  3. If you have a manual pallet jack and an electric one, try using the manual version.
  4. If you have to use an electric pallet jack, use the one with dead batteries.
  5. If you have to use an electric pallet jack, try pushing it in reverse.
  6. If you need to use an electric pallet jack, unplug the charger and put the dead batteries back in the unit; this will let you turn the power off and on without having to charge or replace anything.

Conclusion

A dead electric pallet jack is a dangerous thing to have around. However, if you find yourself with an old, broken, or stuck electric pallet jack on your hands, we have already given some steps for how to move a dead electric pallet jack safely and quickly. First off, make sure the power cord is unplugged. Next use another person’s help if possible one of you should be at the back end of the machine while the other lifts up from underneath.

You can also try using a forklift to move it out of harm’s way by attaching chains over both ends of the forks then lifting them upwards simultaneously until they’re level with each other before lowering onto its new spot on a flat surface. This method may not work for every situation but will come in handy when it does. If you have any questions feel free to let us know!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo