How to Get Spare Tire Out of Trunk
Are you dealing with a flat tire and need to switch your spare? Don’t worry; it’s easier than you think! All you need are just the right tools and a bit of know-how. In this post, we’ll walk you through step by step how to get spare tire out of trunk safely and securely. After reading this article, you’ll be able to identify where all the components associated with changing tires are located in your vehicle and proceed confidently when trading out one bad wheel for another during an emergency situation. So let’s get started -read on for our ultimate guide on getting that pesky extra tire out of your car!
Where Is Spare Tire on Trunk?
The spare tire on a trunk is usually located at the bottom of the trunk. It may be fixed to a bracket or tied down with cables and straps. In some cars, you may need to remove carpeting from inside the trunk in order to get to the spare tire.
Once you have found the spare tire, you will need to remove it from its storage location. If the spare tire is attached to a bracket, you will need to use a wrench or socket set to loosen and remove the bolts that secure it. If the spare tire is tied down with cables, simply untie them and lift out the tire. Lastly, if your car has an access door for the spare tire, open the door and lift out the spare tire.
Once you have removed your spare tire, it can be used to replace a flat or damaged tire. Make sure that you know how to secure the spare tire to your car before driving with it. This is important for ensuring that it does not come off of your vehicle while you are driving.
Now that you know where to find the spare tire on your trunk and how to remove it, you can be prepared in case of a flat or damaged tire. Knowing how to use and secure the spare tire will help ensure that you can get back on the road quickly and safely.
10 Methods How to Get Spare Tire Out of Trunk
1. Open the Trunk and Locate the Spare Tire:
Open the trunk and remove any items that may be blocking access to the spare tire. Most vehicles have spare tires located in a compartment on the floor of the trunk. If your vehicle does not have an accessible compartment, it may be located underneath the trunk or hidden in one of the side panels. Make sure to remove any other items that may be in the way.
2. Remove Carpeting or Hard Panels:
Some cars may have carpeting, panels, or hard panel that needs to be removed in order to get to the spare tire. To do this, you will first need to locate the fasteners that are holding it in place. Commonly these can be found on the underside of the panels. Once you have located them, you will need to remove the fasteners using a socket wrench or screwdriver.
After all of the fasteners have been removed, you can carefully lift the panel or carpeting out of the way. You should now be able to see your spare tire.
3. Unscrew Bolts from the Bracket:
If the spare tire is attached to a bracket, you will need to use a wrench or socket set to loosen and remove the bolts that secure it. Once these bolts have been removed, you can take the spare tire out of the trunk. Make sure to keep track of the bolts and brackets that held the spare tire in place. You will need to replace them when you reattach the spare tire.
Make sure not to lose any parts of the bracket. Although the spare tire is now removed from the trunk, it may still be attached to the vehicle by a cable or chain. To completely free it from the vehicle, you will need to remove the cable or chain as well.
4. Untie Cables and Straps:
If the spare tire is tied down with cables, simply untie them and lift out the tire. If there are straps instead of cables, use a pair of pliers to undo the metal buckle. This will free up the tire and allow you to remove it from the trunk. Be careful when doing this, as the straps and cables can be quite tight. Try to avoid getting cut on any sharp edges.
Now the spare tire should be free, and you can lift it out of the trunk. However, it may still be attached to the wheel well, so you may need to lift and twist it slightly. Once free, place the tire in an area where you can work on it.
5. Open Access Door:
If your car has an access door for the spare tire, open the door and lift out the spare tire. You may need to use a wrench or other tool to remove the bolts holding onto the access panel. If so, make sure it is properly tightened when you’re done.
6. Remove Spare Tire from Storage Location:
Once you have removed all of the securing materials, you can now lift up the spare tire and move it away from its storage location in your trunk. Make sure that you lift it out straight and steadily so as to not damage the rest of your trunk. Place the spare tire in a safe and secure location. You are now ready to install the new tire on your vehicle.
When you have finished, make sure to store the spare tire back in its proper location in your trunk. This will provide you with peace of mind if you ever find yourself needing a spare tire in the future.
7. Secure Spare Tire on Car:
Before driving with the spare tire, you must make sure that it is securely fastened to your car. Start by positioning the spare tire directly behind where your rear axle is located. Use the four lug nuts that came with the spare tire to secure it in the car. Use an appropriately sized wrench to tighten the lug nuts until they are snug but not excessively tight, as this can damage them. Once all the lug nuts have been properly tightened, you should be able to drive safely with your new spare tire.
8. Replace Damaged Tire with Spare:
When it comes time to replace a flat or damaged tire, place the new spare tire in its place and secure it as instructed above; tighten the lug nuts with a wrench in a star pattern. Make sure they are snug but not overly tight. Once all of the lug nuts have been tightened, lower the car to the ground and finish tightening them with your vehicle’s torque wrench until it clicks.
Once you’ve securely fastened the spare tire on your vehicle, make sure to drive at a slower speed and get it serviced as soon as possible. This will ensure that your vehicle can safely and quickly reach its destination.
9. Store Damaged Tire Properly and Safely:
After replacing the damaged tire, store the old one away properly in your trunk. Wrap the tire in a garbage bag and place it somewhere flat in the trunk, away from any sharp objects or edges. You can even tie the spare tire in place to ensure it won’t move around. This will help keep the damaged tire from causing any further damage or puncturing other items in the trunk. It will also help you stay organized and ensure that the tire is still accessible when you need it. Plus, it’ll keep your trunk looking neat and tidy.
10. Drive to Nearest Repair Shop:
As soon as possible, drive your car to a repair shop so that they can check out the condition of the tire and issue any necessary repairs or replacements. If you don’t have a spare tire, they may be able to help you get one and install it. This is very important as driving with a flat tire can cause further damage to your car, including the suspension and brake system.
Driving with a flat tire is also dangerous in terms of safety, as it could lead to a complete blowout and loss of control. Once you get to the repair shop, a qualified mechanic should be able to help you get your spare tire out of the trunk and install it. Now that you know how to get spare tires out of the trunk safely and securely, you can be prepared in case of an emergency. Knowing how to use and secure the spare tire will help ensure that you can get back on the road quickly and safely.
Conclusion
Now that you know how to get the spare tire out of your car trunk, you’ll be prepared for anything. Be sure to check your car’s owner’s manual for specific instructions on where the spare tire is located in your model of vehicle. With this knowledge, you can hit the road with peace of mind, knowing that you’re prepared for whatever comes your way.
We hope this guide on how to get spare tire out of trunk was helpful. Please share it with your friends on social media if you find it useful. And be sure to check back here soon for more informative guides like this one.
Louis Wein
Louis has always been fascinated by cars. He loves the way they look, the sound of the engine, and how they make him feel when he's driving. He is always keen to learn more about different mechanics of cars and how the engine contributes to other aspects of the car. As an automotive technician with over 10 years of experience, he knew how they worked and loved taking them apart to see how they went back together. He was especially interested in the mechanics of combustion engines and loved finding ways to make them more efficient. He loves to work on cars and help people keep their vehicles running smoothly. As a senior editor, he enjoys contributing to Diy quickly because it allows him to share his knowledge and expertise with others.
