How to Build Hot Tub Steps

Are you looking to create a backyard oasis with your own DIY hot tub? Building steps for easy access is a must—but it doesn’t need to be difficult or expensive. In this blog post, we’ll cover how to build hot tub steps so that your pleasure-seeking is made that much easier.

How to Build Hot Tub Steps

From gathering supplies and tools to attaching the stringer boards, railing posts, and handrails – we’ll guide you throughout the whole process step-by-step. Clear instructions combined with photos will take you from start to finish in no time!

Why Building Hot Tub Steps Necessary?

Creating a safe and comfortable pathway to your hot tub is essential for both aesthetics and practicality. Steps provide an easy access point to the structure, eliminate any potential slip-and-fall risk, and can even act as a great place to store bathing accessories such as towels, scrubs, or pool toys. They will also help prevent water from spilling onto the surrounding area and make it easy to close off the tub when not in use.

Gathering Supplies & Tools

The first step to building your own hot tub steps is gathering all the necessary supplies and tools. This includes:

  • Pressure-treated lumber
  • Lag screws
  • Exterior wood screws
  • Balusters
  • Post caps
  • Bolts
  • Washers
  • Nuts
  • A saw,
  • Drill,
  • Leveler,
  • Measuring tape,
  • Sander

10 Steps on How to Build Hot Tub Steps

Step 1: Measure

Measure the size of your hot tub and determine how many steps you will need. You should plan for two or three steps, depending on the height of the tub. The total rise – or combined heights – of each step should not exceed 4 ½ inches.

Step 2: Cut & Assemble Stringer Boards

Stringer boards will form the framework of your steps and need to be cut according to the measurements you took in Step 1. Once the stringer boards have been cut, use lag screws and exterior wood screws to attach them together.

Stringer Boards Will Form the Framework

Step 3: Position & Secure Stringer Boards

Once all of the stringers are attached, position them at the edge of the hot tub and secure them with bolts. Make sure to use washers and nuts to ensure that all connections are tight throughout the building process.

Step 4: Cut & Assemble Railing Posts

Railing posts will be used to attach your handrails, so make sure you measure twice before cutting. When attaching the posts to the stringers, use wood screws and make sure that the posts are aligned correctly.

Step 5: Cut & Assemble Handrails

Using a leveler, measure and mark where your handrails should be placed. Once marked, cut and assemble the handrails using balusters and post caps. Attach the handrails to the railing posts with wood screws.

Step 6: Sand & Stain Your Steps

Once your steps have been assembled, use a sander to smooth out any rough edges. You can then apply a coat of stain or paint to give them an extra pop of color and protection. Smoothing and staining the wood will also help to extend the lifetime of your steps.

Step 7: Attach Rails to Steps

Using lag screws and washers, attach the handrails to each step. Make sure they are secure and firmly in place before moving on. Otherwise, they may come undone or be dangerous to use.

Step 8: Make Final Adjustments

Once the steps and handrails are in place, it’s time to make any necessary adjustments. You may need to adjust the railing posts or balusters if they are not aligned correctly. It is important that you double-check everything before moving on to the next step.

Step 9: Add Non-slip Coating

Apply a non-skid coating to your steps to help reduce slipping and provide extra traction when wet. This is an important step as it will make your steps much safer to use. It will also help protect the wood from water damage.

Apply a Non-skid Coating

Step 10: Enjoy Your Steps!

With your steps now finished, you can enjoy safe and easy access to your hot tub! Make sure to keep them clean and free of debris, as well as check for any potential issues that may need attention. With proper care, your steps should provide you with years of safe and enjoyable use.

By following the steps above, you can easily build your own hot tub steps! In addition to being a great way to access your hot tub, they also provide a potential slip-and-fall risk and can even act as a great place to store bathing accessories such as towels, scrubs, and soaps. 

With a bit of time and effort, you can create a stylish set of hot tub steps that will provide years of safe use and enjoyment.

8 Safety Measures to Follow

  1. Make sure to wear the proper protective clothing when building your hot tub steps. Use non-slip shoes, gloves, and safety goggles when working with wood or power tools. Protective wear will help to prevent any accidents.
  2. Measure your hot tub before you begin building the steps. This will help you determine the size and shape of the steps so that they fit perfectly into your hot tub area. Measuring the hot tub will also help you decide the best materials to use.
  3. Choose a durable, weather-resistant material for your hot tub steps, such as pressure-treated wood or composite material. This type of material is easy to maintain and will last for many years. So, choosing the right material is important for your hot tub’s longevity.
  4. Use non-slip paint or tile as the treads of the steps. This will help to reduce slips and falls when people are entering and exiting your hot tub. It is an extra measure of safety that can help protect you and your family.
  5. Make sure to secure the steps firmly with nails or screws. This will ensure the steps are structurally sound and safe for people to use. Nails and screws should also be rust-resistant for added protection.
  6. Secure the steps to your hot tub with brackets or support boards. This will help to ensure that the steps remain in place and don’t move or shift when people are walking on them. It is an essential step that should not be overlooked.
  7. Install handrails on the steps to help if someone wants additional support entering or exiting the hot tub. This is especially important if young children are using the hot tub, as they may need extra stability.
  8. Put a light near your hot tub area and on the steps so that you can see them clearly when it gets dark. This will make it easier to navigate and ensure that no one trips or falls.
Measure Your Hot Tub

Building hot tub steps is a relatively simple project, but it is important to take safety measures into consideration. Following these tips will help you build durable, safe steps so that you can enjoy your hot tub for years to come!

Frequently Asked Questions

How Much Cost Will It Be?

The cost of materials for building hot tub steps will depend on the size and type of your hot tub as well as the material you choose. The more complex the design, the higher the cost may be. It might be helpful to consult a professional for an exact cost estimate. But don’t worry, building your own hot tub steps can be a great way to save on costs!

What Materials Are Best?

The best materials for hot tub steps will depend on your budget and preferences, but generally pressure-treated wood or composite material are good choices. Pressure-treated wood is easy to maintain and weather-resistant, while composite material is durable and low-maintenance.

Whichever material you choose, make sure that it is compatible with the type of hot tub you have. Choosing the right material is an important step for ensuring the longevity of your hot tub.

What Precautions Should I Take While Building?

Before beginning any project, it’s important to take safety precautions. Wear protective clothing such as gloves and safety goggles when working with power tools or wood. Also, make sure that you measure your hot tub before building the steps, and use non-slip paint or tile for the treads. 

Wear Protective Clothing

Finally, secure the steps to your hot tub with brackets or support boards, and install handrails if desired. Following these safety measures will ensure that you build a safe set of hot tub steps.


Whether you’re looking for a simple and safe way to get in and out of your hot tub or hoping to add a touch of luxury to your backyard oasis, hot tub steps are the perfect solution. You can easily build your own steps using pressure-treated wood or composite material, and make sure to add non-slip paint or tile for extra stability. 

Install handrails if desired, and secure the steps with brackets or support boards. By following these tips on how to build hot tub steps, you can easily build custom hot tub steps that will complement your space and provide years of enjoyment. Thanks for reading, and happy building!

Angela Ervin

Angela Ervin

Angela is the executive editor of DIY quickly. She began her career as an interior designer before applying her strategic and creative passion to lifestyle and home. She has close to 15 years of experience in creative writing and online content strategy for housekeeping, home decorations as well as other niche efforts. She loves her job and has the privilege of working with an extraordinary team. She lives with her husband, two sons, and daughter in Petersburg. When she's not busy working she spent time with her family.

We will be happy to hear your thoughts

Leave a reply

DIY Quickly