How to Drill a Hole in a Rock to Make a Necklaces
Making DIY necklaces is quite a fancy thing for women. There are innumerous beautiful such lockets that are adored by the people. Sometimes it occurs that by observing a piece of rock, people get amused by the elegant design of the jewelry. This tempts them to decide on wearing the jewelry on their necks. But for this, you have to know the exact procedure of making a necklace using the rock, which is much essential for beginners.
The most important thing to do when making this necklace is to drill a hole in the rock. It can be difficult to make an exact fissure in the rock, so specific techniques are used. The necklace will look more beautiful if the hole is drilled carefully. After the hole is drilled, the rock can be put on a string or twine.
For this reason, today, we are going to suggest some procedures for drilling a hole in a rock to make necklaces. There will be a detailed description of the whole process, and we assure you that if you go through these techniques, you will easily be able to have a beautiful and soothing ornament to wear. You can also use them to gift your loved ones. So without much exaggeration, let us go through the main procedure.
Requirements
You will need a rock that you think looks nice, a rotary machine (like a drill or a Dremel), and something to make the hole in the rock. The rotary machine will make it easier to make the hole in the rock.
You will need a clamp and padding materials to drill a hole through the rock steadily. In this case, a clamp stand will work, and the padding materials will give the rock proper safety and hold it tight. Direct interaction with the clamp may damage the stone. Next, you also need lubricant to slow down the heat created by the drill machine.
Next, you will need needles of various sizes. This depends on the type of hole that you are planning to prepare. You will always encounter difficulties in this case, so it is best to keep at least three to four different needles, which will be higher in size than the other. You will also need to have water for keeping the stone cool. Lastly, you will require googles while performing the task as small debris that spreads from the stone can easily harm your eyes.
Procedure
There are many techniques available for performing this process, but beginners may not be able to keep up with all of them. For this reason, we will discuss two necessary procedures that can be handy for everyone. These techniques are discussed below with a detailed explanation.
- Diamond Tipped Drill Method
For this method, you’ll need a standard drill machine. The majority of the work is done using this device, so it’s important to take the time to clean it properly before getting started. Attached debris can easily hamper your work, so be sure to select the desired needle for the drill machine. In this case, we recommend using a diamond-tipped bur.
These diamond-tipped burs are much more efficient and compatible with the existing drill machine. They are manufactured in such a manner that the nip of the needle becomes extra sharp. When this comes in contact with the rock, it gets easier to penetrate the stone. Now that you have selected the needle, you have to sterilize the entire needle in hot water or alcoholic solution.
Then you have to take the rock that you want to penetrate and place it in a clamp. If you do not have a clamp, then you can hold them by hand. But make sure to wear safety gloves before you press the rock. Now you have to start drilling through the rock, but you have to make sure that it is fixed at a certain point. Now the drilling should be appropriately maintained. You should not put much pressure on the rock; otherwise, it will develop a crack. And drilling for a long time is strictly prohibited in such cases.
You have to drill slowly and use a lubricant. You can also use water in this case. This is used because there develops an enormous amount of heat when you are planning to drill, and for this reason, water can be used as a cooling agent. After you have penetrated the halfway through the rock, you have to start drilling from the other side, and in this manner, the total hole will be drilled on the rock. Then you can pass a string through the stone and wear it as a piece of jewelry.
- Dremel Method
This is another method that can be useful for drilling a hole in the rock. In this method, you will need a Dremel. It is a particular type of drilling device designed to perform like a pen. It has less vibration while performing drilling. And the sound produced by this machine is also minimal. This will not affect the people around, and the work will also be much precise. For this process, at first, you will need to clean the stone.
Then you have to select the needle, and there is a unique working manual for using the Dremel. You will need three to four types of needles, and all of them will be varied in size and sharpness. This is done because continuous drilling with the same needle will affect the rock, and thus the integrity of the stone will be compromised. Besides, the needles’ vibration level is also different, which makes a proper drill for the rock.
Now you have to place the rock in a clamp and then put some padding materials on either side of the clamp to maintain the steadiness of the stone. For this method, it must be that you have to use the clamp because the device will put the right amount of pressure on the rock. After the stone is correctly attached to the clamp, you have to start the drilling process. At first, you have to mark the rock on which point you want to make the whole.
For this, you have to take the bluntest needle and then start drilling the rock. The drilling process will be much light, do not hold the device with the stone for a long time. After you have placed a mark on the stone, you have to change the needle into a sharp one and then start drilling in the same manner. Do not forget to sprinkle water on the rock while drilling. This is much important because the heat generated while this effort will minimize drilling.
After you have changed the needle again, you will drill the stone, and you have to drill halfway through the rock. After this, you have to turn the stone and perform the same process; in this manner, the whole rock will have a hole in it. The fissure will be much smoother when you follow this process. You have to make sure that the Dremel is adequately attached to the electrical supply, and the necessary precautions are maintained.
Precautions
- Gloves
The whole process will require the continuous usage of the drilling device. These devices produce much vibration. For this reason, it is much necessary to wear gloves during the whole process. This will let you have a good grip on the machine and the flairs of the rock that is created while drilling will not affect the hands of the user.
- Goggles
We know that when drilling, a device is used. There is a spread of the material outward, and this happens due to the massive amount of force exerted by the drill machine at the rock. These flairs may harm the eyes of the user, and for this reason, it is evident to wear goggles, which will be much helpful to keep the eyes safe. These precautions should be adequately maintained during the entire process.
Conclusion
In conclusion, we hope that the processes we have mentioned for drilling a hole in the rock to make necklaces will be much help, and you can quickly adapt to these techniques. These processes require much fewer elements, and the steps are much easier to follow. For beginners, this is an excellent way to improve the DIY skills, and you can also use these lockets to gift them. Happy crafting! Have a beautiful day!!
You may read also – How to Turn Cobblestone Into Stone
Jane Hubbard
Jane has always been passionate about hair and beauty. After many years of working as a hairdresser specialist, she decided to start her own consultancy business. She is an experienced haircare and beauty consultant, and she loves helping others find the perfect look for them. She has been writing articles for DIY quickly for over 3 years. In her free time she enjoys keeping up with the latest news in the industry, practicing yoga, and spending time with her friends and family.
