How to Hang Something on Concrete Ceiling Without Drilling

Hanging something on a concrete ceiling can be difficult, especially if you don’t want to drill. There are many different ways on how to hang something on concrete ceiling without drilling holes in it. This is an informative blog post about all the other options for hanging things up there! The key to turning something on a concrete ceiling without drilling is using strong magnets. And don’t worry, they won’t damage the drywall.

How to Hang Something on Concrete Ceiling Without Drilling

That’s because you’re not drilling through it! Rather than screwing your hook into the drywall, use solid magnets and attach them to the back of your object so that when you hang it up, the magnet will pull against the opposite side of your wall. Make sure that there’s enough space between both surfaces for this technique to work!

10 Creative Ways on How to Hang Something on Concrete Ceiling Without Drilling

1. Use an Adhesive Putty

Some ceilings are made of brick or concrete, making it difficult to hang things without putting a lot of holes in the surface. However, there are several ways to hang something without drilling into a concrete ceiling.

One way is by using adhesive putty. Adhesive putty is an adhesive that comes in a tube or jar, usually used for fixing objects on walls, like posters. It’s possible to use adhesive putty to hang things without damaging the surface of the ceiling.

2. Use Spring-Loaded Brackets

Another way to hang something on a concrete ceiling without drilling is to use spring-loaded brackets. These are plastic or metal hooks with springs built inside them, opening and closing like a jackknife.

The hook latches onto the underside of the floor joists in your ceiling without causing any damage. They can hold up to 50 pounds each. To use these types of brackets, open them and press them onto the floor joists. Once done, pull down on the handle to tighten and lock them in place.

Plastic or Metal Hooks With Springs Built

3. Use a Ceiling-Mounted Drawer Slide

This is another way to hang things without drilling into the concrete ceilings or brick walls. All that’s needed is a sturdy drawer slide, screws, and a mounting plate. The weight of whatever will be hung on the draw can then be supported by the ceiling-mounted drawer slide and its support bracket attached to a wall.

4. Use Concrete Anchors

Concrete anchors are like screws with screw shafts made of hardened steel or other metal alloys that match the material of the concrete. They have a threaded shaft with a point on one end and ahead on the other.

First, drill a hole through your concrete ceiling or brick wall using a rotary hammer or masonry bit to use these anchors. Then screw in the anchor as you would a regular screw, but be sure to leave some space between whatever you’re hanging and the wall to allow for expansion.

5. Use Toggle Bolts

Toggle bolts are metal screws with wings, usually made of steel or zinc-plated steel that flips open once they’ve passed through a pre-drilled hole in your concrete ceiling or brick wall, expanding against its backside and locking into position. They can hold heavy objects without putting too much stress on the surface of your ceiling or wall.

6. Use Drywall Anchors

A drywall anchor is a type of plastic screw with a pre-drilled hole in its head, allowing it to screw directly into the hole left by a plaster wall anchor, which is usually made of plaster, plasterboard, or masonry. This type of anchor can hold up to 100 pounds when used in drywall and 25 pounds in concrete.

7. Use a Canopy Bolt

Canopy bolts are metal screws with a winged bolt head on one end and a pre-threaded hole in the other, allowing it to screw directly into the underside of your concrete ceiling or brick wall. This anchor can hold up to 130 pounds without putting too much stress on them.

8. Use Wall Hooks

Wall hooks are used for hanging things like clothes, towels, pictures, and so on without damaging the surface of your ceiling or wall. They are made of metal, plastic, or wood and are attached to the back of your concrete ceiling or brick wall using a screw.

Wall Hooks Are Used for Hanging

9. Use a Magnetic Key Holder

This method can also be used to organize the clutter in your kitchen, bathroom, garage, and other rooms in your home, by hanging keys and other metal objects on walls without drilling any holes. The magnetic key holder consists of two pieces of metal with magnetic strips on the back, allowing them to be attached.

To use this type of key holder, simply hang it on your concrete wall or ceiling using two screws so that one piece rests right side up and the other upside down. Your keys can then easily slide in between both pieces of metal for storage.

10. Use Magnetic Strips

If you don’t want to drill holes in your concrete ceiling or brick wall, you can attach a magnetic strip to such surfaces to hang things like keys, knives, scissors, and whatever else needs hanging. The magnetic strips come with an adhesive backing that can be stuck onto flat surfaces using a hairdryer for better adherence.

You Can Check It Out to Drill Into Concrete Without a Hammer Drill

Conclusion

Hanging something on a concrete ceiling is not as difficult as you might think. You can use the following methods on how to hang something on concrete ceiling without drilling. These options will allow for more versatility and functionality in regards to storage, and they won’t leave holes behind like screwing would do.

The first method we’ll discuss is using hooks that are screwed onto studs or joists. This way, any item could be hung from them with ease regardless of weight or type.

Another option is hanging shelves onto brackets attached to screws that go directly into the wall above the shelf. These are perfect for bookshelves because additional space can always be added when needed! Finally, there’s installing wire shelving units near the ceiling and hanging items on them. If you have any questions, please feel free to ask in the comments section below! Thanks for reading!

Angela Ervin

Angela Ervin

Angela is the executive editor of DIY quickly. She began her career as an interior designer before applying her strategic and creative passion to lifestyle and home. She has close to 15 years of experience in creative writing and online content strategy for housekeeping, home decorations as well as other niche efforts. She loves her job and has the privilege of working with an extraordinary team. She lives with her husband, two sons, and daughter in Petersburg. When she's not busy working she spent time with her family.

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo