How to Reattach Garage Door Emergency Pull

The garage door emergency pull is a device used to help people escape from inside the garage when they are unable to open the door. They can be attached directly to the outside of your garage door and will automatically release in an emergency, like a power outage or fire.If your garage door emergency pull is broken off or missing altogether, it’s important to have one accessible for emergencies such as power outages or other issues where help may be needed accessing your home. This quick fix is easy enough if you know what steps to follow! This post will discuss how to reattach the garage door emergency pull if it becomes detached.

How to Reattach Garage Door Emergency Pull

What is Garage Door Emergency Pull?

A garage door emergency pull is an important feature that can prove to be of great help if you ever get into a situation when the automatic door opener malfunctions and you cannot open it. As long as you have attached your emergency pull properly, which is very easy to do, you will never run out of options in such situations. With the garage door systems becoming smarter every day, they can handle various malfunctions that require them to reverse their process and open up for your convenience.

So if something happens due to which a faulty operation occurs, the motors can stop working, or sometimes small problems like those in the sensors can prevent them from working correctly. This sometimes causes people to get stuck inside their garage when they want to go out, but with an emergency pull attached, you never have to worry about such things happening. This article discusses how to attach an emergency pull properly and explains why you should do it.

Steps To Follow: How to Reattach Garage Door Emergency Pull

Step 1: Lift your door.

Once you’ve lifted the emergency release bar, use a crowbar or pry bar to lift the garage door off its hinges. Don’t worry about damaging the metal bars that attach the extension springs to your garage; they’re only there for torsion and won’t be damaged by an impact.

Step 2: Remove the cable from your springs.

If you have a torsion spring system, the emergency release should have retracted it enough for you to slide the cable off of the bar. If not, loosen up the nut holding the pulley in place and pull out on the cable until it’s loose from your springs.

Step 3: Pull open one side of your door.

When your springs are detached, your door will be supported only by the cable attached to the garage door opener. Pull out one side of the door to open it up, and you should find that the other side is raised slightly off the ground.

attached to the garage door opener

Step 4: Grab hold of both sides of your track.

Hold onto each side of the track with a pair of channel locks or pliers. You aren’t going to be able to grab it anywhere else without damaging your garage, so you’ll need something that can clamp onto the steel track itself.

Step 5: Bend the sections at 90 degrees.

It’s hard to bend the sections if they’re not supported, so slide a long pipe or a pair of metal rods under each side of the track. The heavier they are, the easier it will be to lift, and you’ll need something heavy to free up your tracks enough to straighten them out.

Step 6: Bend both sides at once.

Once your cable is ready to support the weight of your garage door, you’ll need to bend the track upwards. Of course, the more high-quality your tracks are, the less they’ll need to be bent to work properly again, and you might not even have to do this step at all if they’re extremely durable.

Step 7: Check for alignment.

Once both sides of your track are at a 90-degree angle with the bottom of your door, you should be able to slide it back into place. It’s probably going to be hard for you to tell if they’re perfectly aligned, so just do your best and make sure that it feels mostly right before you put any force on it.

Step 8: Put tension on both sides of the door.

Get a rope or some tape and run it from one side of the door to the other. Tie off one end to something that can hold tension and pull on the other side until you have both of your tracks evenly extended out from each other and completely vertical. Once they’re in place, get ready to tighten them up.

Step 9: Tighten them up evenly.

The easiest way to do this is to grab the cable that’s the door open and pull it in towards you. Still, if you don’t have a power source nearby, you’ll need to use a combination of tightening and loosening until you get both sides perfectly vertical and equally tight.

Step 10: Open your door

If you’ve done everything correctly, your garage should open up without any problems and work like new again. If not, all you have to do is repeat the process until it does start working properly again. Whatever happens, make sure that you contact a professional for maintenance before the problem gets out of hand, or you’ll need to spend more money replacing damaged parts.

6 Tips To Avoid Damage on Garage Door Emergency Pull

If you have a problem with your garage door emergency pull, it means that there are some troubles in your system or the parts of the device. If this happens, you should know how to do appropriate maintenance and repair work to last for a long time. Here are several tips on maintaining your emergency pull:

1. Check the spring for regular wear and replace it as needed. For example, a worn spring can affect the cables, which would lead to a weak pull. You also have to inspect the pulleys for any wear or damage. If you need replacement parts, you may get them from garage door service providers.

2. Often lubricate your emergency pull system. This comprises all the materials, including cables, pulleys, and springs. You may pour a small quantity into each component to keep them working properly. If you use the best lubricants, they would not affect the plastic parts nor corrode steel and aluminum ones.

3. Replace your garage door emergency pull regularly if it is greatly damaged or worn out. A worn-out emergency pull may cause accidents since it cannot work efficiently to open the door fully, especially those beyond repair. It would help if you also replaced your old and dull cables as well as springs before they wear off completely.

emergency pull regularly if it is greatly damaged

4. Perform regular inspection and maintenance to prevent future problems with your system, including the garage door emergency pull. This would require emergency pull makes the door difficult to move. In some cases, it may not function well and can make accidents happen.

5. Keep your emergency pull clean and free from foreign materials at all times. You may use a shop vacuum cleaner for this purpose or spray compressed air into the component. This way, you would keep it working properly without any problems.

6. You may align the chain and cables more often if they are installed correctly or incorrectly. When the door opens when not supposed to, it indicates that your emergency pull is out of order. The regular inspection would help you keep all parts in order and working properly at any given time.


In conclusion, the emergency pull cable is an important safety feature in your garage door. If you find yourself without it, don’t panic! You can attach a new one with some simple household items, and this blog post on how to reattach garage door emergency pull has all the guidance necessary to reattach your garage door emergency pull. Let us know how it goes in the comment below!

We will be happy to hear your thoughts

Leave a reply

DIY Quickly