How to Remove Corroded Bathroom Sink Drain

Bathroom sinks are one of the most common household fixtures found in any home. They come in all shapes and sizes, but they’re usually made of stainless steel or porcelain. Unfortunately, your sink is corroded, but don’t worry. If you have a little bit of time and patience, it can be fixed in no time.

You’ll need to gather some tools and supplies, so follow along with us as we show you how to remove corroded bathroom sink drain!

How to Remove Corroded Bathroom Sink Drain

Reason to Remove Corroded Bathroom Sink Drain:

Bathroom sinks are one of the most used fixtures in any home. Unfortunately, they’re also one of the most susceptible to wear and tear. If you have a corroded sink drain that has become nearly impossible to remove, then it might be time for a new one.

Tools & Supplies Needed:

  • Adjustable wrench
  • New bathroom sink drain
  • Silicone adhesive

Steps on How to Remove Corroded Bathroom Sink Drain:

Step 1:  Remove the Sink Basin

You’ll need to drain the water from your sink basin before beginning. Once the water is drained from the basin, you can use a pair of tongs to remove any debris that may be left in it. You can also fill up a bowl with some vinegar and place it under the faucet to remove any stubborn particles that might still be stuck inside.

Step 2:  Unfasten the Bathroom Drain Line

You’ll see a metal clamp holding the drain line in place, so undo it by loosening it with your adjustable wrench. Once that’s done, slide out the old bathroom sink drain from the top of the basin.

Metal Clamp Holding the Drain

Step 3:  Measure and Cut the New Bathroom Sink Drain

Before installing the new bathroom sink drain, you’ll need to measure it to ensure that it’s appropriately sized for your basin. You can then cut it to size with a pair of tin snips or a hacksaw and thread one end through the top of the basin.

Step 4:   Thread the Drain Line

Thread the other end of the new bathroom sink drain through the metal clamp, securing it with your adjustable wrench.

Step 5:  Tighten the Clamp

Once you’re finished threading the drain line, tighten down its metal clamp until it’s nice and secure. You can then set your basin back in place and turn the water back on.

Step 6:  Secure the New Bathroom Sink Drain

Once you’ve got the new bathroom drain in place, it’s time to tighten it up and secure it with a new metal clamp. You’ll want to make sure that the bottom of your sink drain slopes away from your home so that water doesn’t get trapped inside. Once you’ve got it in place, give it another thorough cleaning, and then let your bathroom sink drain dry out for a few hours before turning on the water supply to your home again.

You’ve just successfully removed that corroded bathroom sink drain and replaced it with a new one! Before you know it, your bathroom will be looking brand new again. If you have any questions about how to remove corroded bathroom sink drain, then feel free to leave us a comment in the box below.

FAQs:

How to Unclog a Bathroom Sink Drain?

The bathroom sink is probably one of the most used fixtures in any home. Unfortunately, it’s also one of the most likely to get clogged.  Before you call a professional to help you unclog your bathroom sink drain, there are a few things that you can try first.

Using a Homemade Cleaner

What is the Best Way to Clean My Drains?

One of the best ways t of ofo clean your bathroom drain is by using a homemade cleaner. A strong baking soda and vinegar mixture can help build up in your drains, while boiling water down the blockage can help dislodge it. A snake can also be a great way to clear out your drains and keep them free-flowing.

How to Unclog a Kitchen Drain?

Kitchen sinks are also one of the most used fixtures in any home, so it’s not surprising that they can get clogged too. If you’ve tried everything and still can’t seem to unclog your kitchen drain, then all you need is a little bit of elbow grease and some vinegar.

How to Remove Hair Clogs From Drains?

If you’ve tried everything, but your drain is still clogged with hair, then it might be time for you to consider installing a garbage disposal unit. Before doing anything else, try using boiling water or some strong chemicals like Draino to try to break down the clog before you replace your drain.

How Do I Unclog a Bathroom Sink?

One of the most common reasons for a bathroom sink to be clogged is because there’s too much hair in it. You can try using a plunger or a drain-clearing chemical, but if that doesn’t work, you may need to call a professional because it might mean that there’s a bigger problem with your drains.

Try to Remove Any Hair

How to Fix a Whirlpool Bathtub Drain?

A whirlpool bathtub drain isn’t really a clog so much as it is a problem with how the water drains from your tub. There are a few different things that might cause it, but you can use a plunger or try to remove any hair or debris from your drain to fix it.

What Causes Bathroom Drain Clogs?

There are a few different things that might cause your bathroom drain to clog, but one of the main culprits is hair. You can try using chemicals or plunging them, but if those don’t work, then you’ll need to call a professional to take care of it.

Conclusion:

In the end, it’s important to keep in mind that as long as you take your time and use a little patience when dealing with any plumbing issue, no matter how small or big, there is always a solution. You may not be able to make things perfect all at once, but if you’re willing to put some work into it, one day soon, you’ll have a bathroom sink drain that does what it should!

I hope you enjoyed this article on how to remove corroded bathroom sink drain! Be sure to share this useful information with everyone you know! Thanks for reading!

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo