How to Remove Kitchen Faucet Without Basin Wrench

Everyone has tried and failed to remove a stubborn faucet before, but with this guide, you can do it without too much difficulty. All you need is the right tools, which we will discuss in detail below. A kitchen can quickly become cluttered with appliances and other objects as time goes on. If your faucet isn’t working correctly, then it’s time for a replacement!

Luckily we have all the information you need to know about removing the kitchen faucet without a basin wrench and installing a new one. We’ll also show you the tools needed for each task so that nothing gets missed or forgotten during installation. You should never try to replace your kitchen sink yourself if there is any uncertainty about whether or not you are qualified.

How to Remove Kitchen Faucet Without Basin Wrench

10 Ways on How to Remove Kitchen Faucet Without Basin Wrench:

In some cases, you may have a kitchen faucet with some problems – but the problem is you do not have the proper tools to remove the faucet. In this case, a basin wrench is needed. Here are ten ways how to remove kitchen faucets without a basin wrench.

1. Use Friction to Remove Kitchen Faucet

You can use friction between your hand and the faucet to remove it. First, apply a lubricant to the faucet, such as WD-40, and use a pair of pliers or another gripping tool to hold onto the faucet. Then move your hand up and down the faucet until it is removed from its hole.

2. Secure Kitchen Faucet Without Basin Wrench

Use a screwdriver to secure the top of your kitchen faucet to keep it from spinning. Afterward, use any wrench and turn it counterclockwise to unscrew the faucet. Once you have done so, pull up the faucet and remove it.

3. Use Specialized Tool

If you do not have a screwdriver, use your vise grips to hold onto the faucet, again applying WD-40 for better grip. Turn it counterclockwise using another wrench (with teeth or slots) until the faucet is removed. Once you do so, you can remove the vise grip handle.

4. Use Channel Lock (Jaw) Pliers

If you’re trying to remove a faucet and don’t have the right tools, you can try using a pair of pliers. Wrap the pliers around the faucet and turn it counterclockwise to remove it. Be careful that the teeth on the pliers face inwards, or you might slip.

5. Use Plumber’s Putty

Coat the bottom of your faucet with the plumber’s putty, then wrap a rag over it and use another wrench to hold onto the rag. Apply pressure on the wrench while also turning counterclockwise to remove the faucet.

6. Use Ice Cube to Hold the Faucet

If you do not have any tools, an ice cube can be used to hold the faucet in place so that it will not move when you are trying to unscrew it. Prepare two ice cubes by putting them into your freezer overnight or for at least three hours. Then use one of the cubes to hold onto the faucet while you turn the other cube clockwise to remove it.

7. Use Rubber Band

Much like the ice cube trick, you can use a rubber band to hold your faucet in place. Put the rubber band around the top of your faucet, and then wrap a rag or towel around it. Keep applying pressure with the rubber band, and using another wrench, turn counterclockwise until it is removed.

8. Use Claw Hammer

Using a claw hammer, apply pressure on the faucet by gently hitting it from below to loosen the faucet from its spot. Do this repeatedly until you can remove your kitchen faucet easily with another wrench or pair of pliers.

9. Use Baking Soda and Vinegar

Pour baking soda (about 1 cup’s worth) into your sink, then pour apple cider vinegar on top of it. You can use a stick or spatula to mix the two if necessary. Let the mixture sit overnight. The next morning, all you have to do is take another wrench and remove your faucet.

Pour baking soda (about 1 cup's worth) into your sink, then pour apple cider vinegar on top of it. You can use a stick or spatula to mix the two if necessary.

10. Get Help From a Friend

If you’re having trouble removing your kitchen faucet, ask a friend for help. Have them hold onto it tightly while you use another wrench or pliers to loosen and remove the faucet. All ten of these methods allow you to remove your kitchen faucet without a basin wrench, so try any of them if you are having trouble.

You Can Check It Out to Clean Kitchen Cabinets With Murphy’s Oil Soap

Some Tips and Tricks

  1. All work in the kitchen should be done clean and tidy.
  2. Before removing the faucet, make sure you shut off the water supply for this tap and drain away any water left in it (you’ll need either a plumber’s wrench or some channel-lock pliers for this).
  3. Make sure that the sink is dry before starting to remove the faucet.
  4. After removing the faucet, make sure you clean any residue of the plumber’s putty (if the tap has been replaced recently) before reassembling it.
  5. Note that if you have a pull-out faucet, these can be very difficult to remove without disconnecting the hose.
  6. Faucets often only require loosening the set screws or bolts before removing them. You may need to use an adjustable wrench for this.
  7. If it is hard to remove the faucet, try eliminating the nuts or bolts under the sink.

Things to Consider Before Removing Kitchen Faucet Without Basin Wrench

The kitchen faucets have a pop-up stopper and not a separate drain plug under the sink, but if yours has an extra plug, be sure to
  1. Most modern kitchen faucets have a pop-up stopper and not a separate drain plug under the sink, but if yours has an extra plug, be sure to remove it after shutting off the water supply line.
  2. Now, turn off your main water valve before removing any other components which connect to the water lines, such as supply hoses, sprayer lines, etc.
  3. The best faucet wrench to use is one that will fit around your faucet’s spout or showerhead.
  4. If the wrench you use gets stuck on the screw, spray some lubricant like WD-40 onto it.
  5. Use a small pipe wrench to remove any stubborn screws and nuts that you cannot get a hold of with your fingers.
  6. Don’t be afraid to use an adjustable wrench if the nut around the base of your faucet keeps slipping out from under the wrench’s jaw.
  7. Before removing any P-trap, inspect it for any sign of leaks or problems.
  8. To remove it, detach any supply lines connected to the faucet’s diverter by unscrewing them with a wrench before pulling them off with your hand.

Conclusion

In summary, using pliers and a towel can remove a faucet without a basin wrench. The best way to do this is by using a basin wrench. A basin wrench has an extra-long handle that will allow you to remove your pesky faucet without cutting into the pipes, which can be dangerous and expensive!

But if you don’t have one of these handy tools on hand, other options are still available for removing the stubborn fixture; consider trying some boiling water or soap bubbles first.

Make sure to protect your hands with the towel when removing the old spout from the sink flange. With these tips in mind, you should easily replace or repair your kitchen faucet at home. We hope this blog post on removing kitchen faucets without a basin wrench has been helpful. Let us know your thoughts in the comments below!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo