How to Remove Oil Stain From Trex Decking
Dealing with an oil stain on your Trex decking can seem daunting, but it’s a fairly easy process. Oil stains can be a real pain to remove, especially if they’re not addressed right away. If you have a Trex deck, though, there are some specific steps you can take to get the stain out and restore your deck’s appearance.
In this blog post, we’ll outline the steps you need to take on how to remove oil stain from trex decking and restore your decking to its original condition. Follow these simple steps, and your deck will be looking good as new in no time!
Summary: If you have a Trex deck and you’ve spilled some oil onto it, there are a few things you can do to remove the stain. First, blot the area dry with a cloth or paper towel. Next, mix a solution of 1 cup white vinegar and 3 cups water in a spray bottle. Spray the vinegar solution onto the oil stain, wait 10 minutes, then scrub the stain with a scrub brush. Finally, rinse the area with water.
What Causes Oil Stains on Trex?
Trex is a common material for decking because it does not require staining or oiling. Trex tends to be very resistant to water stains and bleaching from the sun, but it will absorb oils that come in contact with its surface, leading to unsightly yellow stains. These stains can dull and damage the beautiful look of your Trex deck.
The oil stains on your Trex deck come from cooking oils and lubricants such as motor oil, gear lubes, hydraulic fluid, and even vegetable oil. These oils will penetrate the surface of your clean Trex deck over time, leaving ugly yellow or brown oil stains. These stains are difficult to remove once they have had time to penetrate into the decking, but you can restore your Trex deck to its original beauty with a little elbow grease and some commercial cleaners.
12 Effective Ways on How to Remove Oil Stain From Trex Decking:
1. Use Hot Soapy Water:
If you have an oil stain on your Trex decking, one of the best ways to remove it is by using hot soapy water. Just mix equal parts water and dishwashing soap, and then apply it to the affected area.
2. Use WD-40:
Another effective method to use is WD-40. Just spray the product on your Trex decking and allow it to soak in by itself.
3. Use Alcohol:
To remove excess dirt, simply dissolve alcohol in oil and wipe off with a cloth. You can also use paint thinner or acetone with cotton balls; apply to affected area and let sit for a minute before wiping off with a clean cloth.
4. Use stripper:
You can also use an oil-based paint or deck stain remover to remove the stains. Combine equal parts of product and water before applying on the affected area. Wait for a few minutes before wiping off the solution with a clean cloth. Finish off by hosing the area with water. You can also use a deck cleaner that contains oxalic acid to remove rust stains on your deck.
5. Use Baking Soda Paste:
For this technique, you need to mix baking soda paste with a little water until you get a mixture that is not too runny but not thick either. Once you have the right consistency, apply it on the stain using a scrub brush and leave it for an hour before rinsing with cold water.
6. Use Ammonia:
To make a paste to remove a stain, mix equal parts of ammonia and warm water. Apply the paste to the stain, leave it overnight, and then scrub it with a brush in the morning. Rinse with cold water. Repeat this process for the best results.
7. Use Vinegar:
Vinegar contains acetic acid, which effectively dissolves oil stains without harming your Trex decking. Mix equal parts vinegar and water before applying it to the stained area. For best results, allow the stain to sit overnight and rinse off in the morning with cold water.
8. Use Dish Soap:
An excellent way to remove oil stains from Trex decking is by dish soap. Just apply a generous amount of dish soap on the affected area and then scrub with an abrasive brush. Finally, rinse off using cold water after sitting for a while. To remove grease stains from Trex decking, mix 1 cup of flour with ½ cup of salt and ¼ cup of dishwashing liquid. Apply this mixture on the stain and let it sit for a while.
9. Use Bleaching Cream:
A way to remove oil stains from Trex decking is by using bleaching cream. Apply the product to the affected area, allow it to sit overnight, and rinse off in the morning with cold water.
10. Use Aspirin Paste:
Another effective way to remove oil stains from Trex decking is by using aspirin paste. Crush some aspirin tablets and mix with water until you get a mixture that has the consistency of cream. Apply the paste to the stained area, let it dry for an hour, and rinse off quickly with cold water.
11. Use Tide Liquid Detergent:
Tide liquid detergent can be effective in removing oil stains. First, mix one teaspoon of Tide liquid detergent with three tablespoons of warm water and then apply to the stained area. Next, rub it into the affected area using a piece of cloth or sponge gently. Rinse by using cold water after it has sat for an hour.
12. Use Fireplace Fire poker:
This method is more effective when the stain has been set for a long time. Using a fireplace fire poker, scrape the Trex decking to remove the residue and then rinse off using warm water and detergent.
Some Tips and Suggestions
Here are some tips and suggestions on how to remove oil stain from trex decking.
1. Apply the stain remover directly to the surface. Let it soak in for at least 15 minutes before wiping away with a sponge or rag.
2. Use a scrub brush or steel wool pad to remove any heavy staining that the cleaner may leave behind.
3. Rinse well with water after cleaning, mainly if the stain remover contains chemicals. This can prevent discoloration and pit of any surrounding wood surface.
4. Mix one cup of bleach with two gallons of water and apply it to another part of the deck that has not been treated yet. If there is no color change, this means that your material is not oil-based, and you should try the other methods listed above.
5. Wash your deck with soap and water to remove any remaining cleaner or stain remover, then allow it to dry completely.
6. Stain the deck again because if previous stains were oil-based, there is a chance that they may resurface after cleaning with another product.
Can You Use Bleach on Trex Decking
Many homeowners are looking at Trex decking to improve the look of their backyard. Trex decking is made from wood fiber, plastic, and other materials that mimic real wood. The main advantage Trex decking has over traditional wooden decks, which require regular maintenance and refinishing, is that it requires no special care.
One thing that may be an issue for some homeowners is the appearance of oil stains on their Trex decking. Oil stains are typically the result of oil or grease that has made its way onto the decking. The oil can come from various sources, including cooking, cars, and other activities. If you have pets, they may also be to blame for your Trex decking oil stain problem.
Frequently Asked Questions
Q: Can You Use Simple Green on the Trex Deck?
Yes, you can use simple green on the Trex deck. Use a 1/4 cup of fresh orange juice in one gallon of water. If the stain is very severe, you may have to repeat this process two or three times. Wait until the deck is dry before applying any other cleaners. For an average grease or oil spill, you can use baking soda.
Sprinkle the area liberally with baking soda, let it sit for an hour before sweeping away the residue. Finally, rinse the decking very thoroughly with water and blot dry. When you clean Trex decking, you should wear rubber gloves while handling any chemicals or cleaning products. Avoid getting cleaners on your skin or in your eyes.
Q: Do You Have to Remove the Stain Immediately?
The oil-based stain has already penetrated the decking and cannot be removed. However, Simple Green can still break down the stain’s appearance over time. The oil will continue to oxidize after the application of Simple Green, therefore eventually losing its negative visual appearance. It is recommended to re-apply Simple Green once per year for the best results.
Q: How Can I Remove Oils and Fats From My Concrete Driveway?
If you have a rock, brick, or concrete driveway and want to know how to remove oil and fat stains from your driveway, then continue reading. You should be able to get rid of that unwanted stain pretty easily.
Before we give you some tips on removing oil and fat stains from your driveway, we need to discuss its kind of oil. If the oil you are looking to remove is cooking oil or some other vegetable oil, then go no further.
Conclusion
If you have a stain on your Trex decking, several ways to remove it. The first is by using a household cleaner and sponge or cloth. You can also use club soda as an alternative if that’s what you happen to have on hand. Another option is to clean the area with bleach then wipe it away with water and paper towels.
For stubborn stains, try scrubbing the surface with baking soda mixed in warm water before cleaning with soap and water, followed by wiping dry with newspaper or rags for additional absorbency. We hope this blog post on how to remove oil stain from trex decking has been helpful. If you have any questions or want to know more then feel free to comment below!
