How to Set Temperature on Daikin Air Conditioner

Introduction:

Air conditioners are machines that generate and maintain a comfortable room temperature. The Air Conditioner is manufactured in Japan and has earned the title , of the world’s most energy-efficient model six years in a row.

In this article, I will discuss how to set temperature on Daikin air conditioner.

The Daikin Air Conditioner operates by circulating refrigerant gas, which absorbs and removes heat in the surrounding air to cool it down in hot weather and releases heat in cold weather.

The cooled or heated air then flows into your room via an indoor unit, placed near your window where you can control settings. This allows for maximum comfort through precise, temperature control while still saving you money on your electric bill all year round.

How to Set Temperature on Daikin Air Conditioner

Guide on How to Set Temperature on Daikin Air Conditioner:

Before the onset of summer, preparation is essential for ensuring there is no discomfort in your home. For most Daikin Air Conditioners, you can set the temperature anywhere between 18°C and 30°C (64°F to 86°F).

The most efficient operating range lies between 24-27 degrees Celsius. In case of a dryer climate or when it’s winter, you might want to opt for a slightly higher setting from 26-29 degrees Celsius.

Step 1: Press the Power button on your Daikin Air Conditioner.

The temperature can be set to Celsius or Fahrenheit. The default unit is Fahrenheit, but it can be changed to Celsius by pressing the Temperature Up button until “°C” flashes.

If you want to switch back to the Fahrenheit unit, press the Temperature Down button until the display shows 30°C (86°F).

Press ” °C” / “°F” again if you don’t need this setting. And then, press the Mode button to confirm your selection and exit menu mode.

Or, press the remote controller’s MODE button for 3 seconds until all digits blink twice continuously.

Then press + or – buttons to adjust units between “°C” and “°F,” + to increase temperature, – to decrease temperature. Finally, press the MODE button again to confirm your selection.

Step 2: Turn the Temperature knob toward H (or F) until the desired temperature appears in the display.

You can also press or hold down the TEMP button on your remote controller. Then use up and down buttons to adjust temperature, value between 18-33 degrees Celsius/64-91 degrees Fahrenheit, 18-degree mark signifying lowest temperature setting.

And 33 degrees representing highest preset temperature level for this model. Press Y(once)/T(hold) button until you set the desired, temperature or wait 10 seconds until it returns to regular operation with the highest preset at 33 degrees on default.

Again, adjust temperature with up and down buttons if you need to. Press Y(once) to confirm your selection.

Step 3: Press the Air Flow Direction button until “AUTO FLOW” appears on the screen. Press the red ON/OFF button to start cooling.

You can also press or hold down the FAN button on your remote controller until AUTO-FLOW blinks once and then press the MODE button on the remote controller repeatedly until “AUTO-FLOW” is displayed.

Set Temperature on Daikin  Air Conditioner

Now, use up and down buttons to set desired airflow direction between Vertically/Horizontally or wait 10 seconds for cool air to automatically to be sent out from the nozzles with Auto mode active.

Finally, press the red power button on the unit’s control panel or + side of the fan speed (+) button on the remote controller to start operation.

If using the remote controller, press the FAN button on the remote controller until AUTO-FLOW blinks once and then press MODE repeatedly to set airflow direction between Vertically/Horizontally or wait 10 seconds for cool air automatically be sent out from the nozzles with Auto mode active.

Next, press the red power button on the unit’s control panel or + side of the fan speed (+) button on the remote controller to start operation.

Note:

Make sure nothing blocks the flow of air coming out of your Daikin Air Conditioner during either Auto mode or Horizontal/Vertical setting. If not satisfied by cooling performance, simply press the red ON/OFF (power) button followed by the temperature adjusting procedure described in Step 2.

Setting Temperature  On Daikin Air

Precautions While Setting Temperature on Daikin Air Conditioner:

The following settings are factory preset. We recommend not to change it for the time being.

– Indoor Temperature: 26 C

– Outdoor Temperature: 35 C

– Multi Dehumidification Setting: Off

— If you wish to use this function, switch on manually by pressing the “FAN SPEED” button and holding it till the unit beeps twice. Or, set ON or AUTO at desired temperature through remote or unit touch panel display.   Then, after 10 minutes, this will automatically switch to dehumidification mode during the high humidity season (i.e., spring).

* Depending upon your preference and location of installation, adjust the temperature so that indoor unit fan speed adjusts automatically to meet your comfort level.

* The air conditioner starts to operate at the set temperature and fan speed. You can use this unit even in summer months when refreshing is desired without making it too cold with an outdoor temperature of 35 C by setting the “MIN COOL ON” timer.

Benefits of Using a Daikin Air Conditioner:

One of the most important things you can do to improve your comfort and keep your energy bills down is to use a Daikin Air Conditioner. A Daikin Air Conditioner comes with several features that make it easy to control, like sleep mode and timer functions.

Aside from these convenient features, Daikin makes some of the best units on the market in terms of quality, quietness, efficiency, and durability, which is why HVAC contractors often recommend them.

If you’ve never used an air conditioner before or if you’re still using one of the older window units, you should consider switching to a much more efficient Central Air Conditioning unit like a Daikin for several reasons:

  • They dehumidify the air (most window units do not), which will help reduce mildew and mold, improve your allergies and make your home healthier.
  • They are very efficient; Central Air Conditioners can cool down an entire house much faster than a small window unit used in one room at a time.
  • Daikin ACs are quiet even at high speed compared to cheaper inverter models like Fujitsu.
  • You can use them for heating in the wintertime by reversing the airflow so hot air is blown out instead of cold air. This way, you’ll be able to save money on both heating and cooling bills!
Using a Daikin Air Conditioner

Conclusion:

I hope this article has clarified all your queries regarding how to set temperature on Daikin air conditioner. Thank you and have a nice day

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo