How to Temporarily Hem Pants
When wearing pants, the chances are that they might ride up a little high or down when you change your shows. If you do not want your favorite pants to drag on the ground when you change the heel of your presentations from high to low, you need to do some necessary hemming. Hemming your pants is the best way to ensure that you do not have to cut off the pant and easily switch between the length. So, if you want to know how to temporarily hem pants, then follow us!
There are several ways that you can temporarily hem your pants. Some of them are easy, and some of them might require a little bit of work. Let’s start with the processes.
Summary: If you want to temporarily hem pants, there are a few different methods you can use. One is to use a pair of scissors, which can be done by cutting off the bottom of the pants about two inches below the waistband. Make sure to cut evenly around the circumference of the pants so that they have a neat, even hem.
Different Ways of How to Temporarily Hem Pants
First Way:
The number one way of how to temporarily hem pants is by sewing them. You do not have to know some decorative sewing or have to be a pro-sewer. If you know how to put the thread through the needle, you will be able to do it. First, measure how much you need to cut. You should cut about an inch higher than the desired length of your pants. If you are not sure, ask a friend or family member to help you.
The first thing you have to do is measure the length. Wear the pants and see how much you want to hem. You can use some chalk to mark it up.
Get your needle and thread ready. You better use a thread that is similar in color with other strands of the pant.
Fold the pants inward with measuring length.
Simply use the basic stitching pattern with short strokes, and you will be done. Continue doing it on both sides. Also, make sure that the length of each leg is equal.
Second Way:
As for the second way of hemming pants temporarily, you need to have Velcro straps and double-sided tapes.
Measure the length of the hem on your pants. Make sure both of the legs are equal.
Fold both of the legs of the pant inward according to the measurement.
Put the Velcro where you want them to be and point them in a place to stick together correctly.
With the double-sided tapes, connect the Velcro to the pants, and you are done!
Third Way:
As for this way of how to temporarily hem pants, this is by far the easiest and temporary one.
For this method, you have to use tapes. It could be double-sided tape, Hollywood tapes, or any fabric tapes you have.
Fold the pants inward with the correct measurement and tape it down inside the pants, and you are done!
Frequently Asked Questions
Can You Wash Clothes With Hem Tape?
Hem tape is a type of adhesive that can be used to secure fabric or other materials. It is typically made from polyester fibers and is used for a variety of purposes including attaching elastic, hemming fabric, and attaching tags to clothing. Yes, You can wash clothes with hem tape.
Does Temporary Hem Tape Work?
There are many temporary hem tapes available in the market, but most of them are not effective. The problem with these tapes is that they can cause complications like bleeding, infections, and rashes. The use of a temporary hem tape can also cause the dress to rip off. This is why it is advisable to find a good quality and reliable temporary hem tape. You can check out the various brands available in the market and then choose the one that suits your need.
The best way to use a temporary hem tape is to apply it to your hairline just above the temples on both sides. If you have no plans of coloring your hair, then you can also use a permanent color. If you want to use a temporary hem tape on your hairline, then you need to first shampoo your hair and towel dry it. Next, you need to apply the temporary hem tape to your hairline.
Is There a Tape for Hemming Pants?
Yes, there is a tape for hemming pants. This can be done in many ways, but it should be done with caution. Some of the best methods are:
1. Fold the hem and iron it onto the pant leg with a cloth-covered iron.
2. If you have a heavy-duty pair of scissors or shears, then use those to cut out a pattern from the material that is sewn onto the hem and then remove them by using your fingers or pliers.
Final Thoughts
That is all you need to know on how to temporarily hem pants. By temporarily hemming pants, you do not have to cut them but use them on different occasions. You can even now wear other’s pants using this technique if the pants are too long for you. All you have to do is find the best way you can be done with the work, and we hope our help will be enough to guide you.
You may read also – How to Make Denim Lighter
Nancy Behan
Nancy is an embroidery artist, fashion blogger and a full time editor at DIY quickly. Nancy edits the fashion section on DIY quickly, focusing on the embroidery and cross stitch articles, alongside with fabric and other costume design elements. She graduated from the University of Michigan with a Bachelor of Arts in Art History. She loves to work on her own projects, read books and watch romantic movies in her spare time.
