How to Tie Rope Handcuffs

In the interest of safety, always use softer materials like cloth or scarf for your rope handcuffs. You don’t want your partner to accidentally get hurt.

In this tutorial, we will be showing you how to tie rope handcuffs. This bondage knot is simple but makes a sturdy restraint that is difficult to escape from. It is perfect for beginner pranksters who want to experiment with bondage play. So, without further ado, let’s get started!

How to Tie Rope Handcuffs

10 Steps on How to Tie Rope Handcuffs

1. Cut the Rope

Cut a length of rope that is long enough to wrap. Make sure to cut the rope to twice the length of your desired handcuffs. You’ll want to have some extra rope to work with, so err on the side of too much rather than too little.

2. Fold the Rope in Half

Take the cut length of the rope and fold it in half to have two equal lengths. To take the step further, you can tie a knot in the center of the rope to keep the two halves together. This will make it easier to work with when tying the handcuffs.

3. Make a Slipknot

Tie a slipknot about 10 inches from the end of the rope. This will be used to tighten the handcuffs once they are tied.

4. Tie a Slipknot

Take the end of the rope and make a slipknot around the other half of the rope. This will create a loop that can be tightened or loosened as needed. Be careful when tying the knot, as you don’t want it too tight or loose.

5. Pull the Knot Tight

Pull the knot tight, ensuring the loop is small enough that it can’t be slipped off easily. If the loop is too large, the handcuffs will be too loose and won’t provide much restraint.

6. Wrap the Rope Around the Hand

Take the other end of the rope and wrap it around the person’s hand, crossing over the top of their wrist. You need to keep in mind that the handcuffs should be tight but not too tight. You don’t want to cut off circulation to the person’s hands.

Handcuffs Should Be Tight

7. Tie a Second Slipknot

Tie a second slipknot around the first piece of rope, making sure to pull it tight. Lose pull the rope and make sure the second slipknot is pulled close to the first one. You don’t want there to be a lot of space between the two knots, as this will make the handcuffs too loose.

8. Repeat on the Other Hand

Repeat the same steps on the other hand. Once both hands are tied, you can adjust the slack in the rope to make the handcuffs tighter or looser as needed. Just be careful not to make them too tight, as you don’t want to cut off circulation to the person’s hands.

9. Tie the Two Loose Ends Together

Take the two loose ends of the rope and tie them together, making sure to pull the knot tight. This step is important as it will prevent the person from being able to slip their hands out of the handcuffs.

10. Test the Knots

Give the knots a good tug to ensure they are secure before proceeding with any bondage play. You can always tighten them up if they are too loose.

There you have it! Now you can tie rope handcuffs. This simple but effective knot is perfect for beginner bondage play.

You Can Check It Out To Clean Rusty Handcuffs

Instruction For Tying The Knot

  1. Make sure the rope is of the appropriate length. You will need about 2 feet (60 cm) of rope for each cuff.
  2. Fold the rope in half to form a loop.
  3. Feed the loop through one of the holes in the cuff, then pull it tight.
  4. Take the loose ends of the rope and feed them through the other hole in the cuff.
  5. Pull the rope tight, ensuring the knot is secure.
  6. Repeat steps 1-5 for the other cuff.
Fold the Rope in Half

Different Kinds of Knot

Now that you know the basics of tying rope handcuffs let’s look at some different knots that can be used to create more elaborate restraints.

1. The Figure 8 Knot

The figure 8 knot is a great way to create a more secure bond between the handcuffs and the person’s wrists. To tie this knot, simply follow the instructions above, but make a figure 8 knot instead of a regular slip knot.

2. The Japanese Bondage Knot

The Japanese bondage knot is a little more complicated than the other knots we’ve looked at so far, but it’s well worth the effort. This knot is often used in shibari, a Japanese rope bondage type. To tie this knot, start by feeding the rope through one of the holes in the cuff.

Then, make a loop with the rope and feed it back through the hole. Next, take the loose end of the rope and wrap it around the standing part of the rope, making sure to cross over the top of the loop. Finally, feed the loose end of the rope through the loop and pull it tight.

3. The Double Knot

The double knot is another great way to create a more secure bond between the handcuffs and the person’s wrists. To tie this knot, simply follow the instructions above, but make a double knot instead of a regular slip knot.

4. The Figure 8 Slipknot

The figure 8 slipknot is a variation of the regular figure 8 knot. To tie this knot, start by feeding the rope through one of the holes in the cuff. Then, make a loop with the rope and feed it back through the hole. Next, take the loose end of the rope and wrap it around the standing part of the rope, making sure to cross over the top of the loop. Finally, feed the loose end of the rope through both loops and pull it tight.

5. The Bowline Knot

The bowline knot is a great way to create a more secure bond between the handcuffs and the person’s wrists. To tie this knot, start by feeding the rope through one of the holes in the cuff. Then, make a loop with the rope and feed it back through the hole. Next, take the loose end of the rope and wrap it around the standing part of the rope, making sure to cross over the top of the loop.

Finally, feed the loose end of the rope through both loops and pull it tight. With these five different knots, you can create various restraints that are perfect for all kinds of bondage play. So get creative and have fun!

Create a More Secure Bond Between the Handcuffs

Additional Tips and Advice

  1. If you’re tying rope handcuffs for the first time, it’s always a good idea to have someone else help you. This way, you can both get a feel for how tight the rope should be and make sure that the knots are tied correctly.
  2. When tying rope handcuffs, be sure to use a sturdy rope that won’t break easily. You don’t want your partner to accidentally get loose and hurt themselves.
  3. If you’re not sure how to tie a specific knot, there are many helpful online tutorials or books that can teach you. Once you know how to tie the basic knots, you can get creative and experiment with different ways of tying rope handcuffs.
  4. Remember to always play safe and use common sense. If you’re not sure about something, it’s always better to ask a friend or expert before trying it out.
  5. Make sure the rope handcuffs are not too tight. They should be snug but not so tight that they’re painful or uncomfortable. You should be able to slip two fingers between the rope and your partner’s skin.

Few Things You Need To Keep in Mind

  • The rope should be strong and sturdy.
  • Knots should be tight.
  • Handcuffs should be comfortable.

Frequently Asked Question

What kind of Rope Can You Use?

Just about any type of rope can be used for handcuffs, as long as it is strong and durable. Some people prefer to use nylon rope, as it is less likely to cause rope burn than other types of rope. However, any type of rope will work as long as it is strong enough to hold the person in place.

What Type of Rope will be Best for Handcuffs?

The best type of rope to use for handcuffs is a sturdy yet soft rope. A good option is to use cotton or hemp rope. Avoid using a synthetic rope, as it can be too slippery and difficult to work with.

What if the Handcuffs are Too Tight?

If the handcuffs are too tight, you can loosen them by untying the knots and starting over. Be sure to tie the knots more loosely the second time around so that they aren’t too tight. If the handcuffs are still too tight, you can try using a different type of rope or even a scarf.

What if the Handcuffs are Too Loose?

You can tighten the handcuffs by pulling on the knots if the handcuffs are too loose. You can also try tying the knots tighter the next time you use them. If the handcuffs are still too loose, you can try using a different type of rope or even a scarf.

Tighten the Handcuffs By Pulling on the Knots

Conclusion

So there you have it, your very own step-by-step guide on how to tie rope handcuffs. This is a great beginner bondage knot for those just starting out in the world of kink and can be easily adjusted to fit any body size. Remember always to practice safe bondage play, and have fun!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo