How to Attach a Wooden Gate to a Round Metal Post
Wooden gates offer a classic look around the yard. Their presence in the yard delivers a perfect combination of functionality and comfort. The gentle swinging, the clanging of latches can give you an aesthetic feel in your home. Based on the requirements, these wooden gates can be installed in different ways. But generally, most of the homeowners prefer its installation with a round metal post. Actually, this combination is pretty much sturdier than the rest. So, when you install a wooden gate with metal posts, you will be able to ensure their longevity to the fullest. Wanna learn how to attach a wooden gate to a round metal post. Let’s dive in!
How to Attach a Wooden Gate to a Round Metal Post
Below I have discussed some simple steps with which you can accomplish the entire installation in no time. Let’s have a look at them.
Step 1
First of all, you have to figure out the accurate measurement where you are going to install the new posts. Once you have got that mark the places and make sure to select the best position for your posts, then follow each marking and shovel out a hole at it. In this case, you should make each hole about 12 inches deep with a width of 4/4 inches, at least. Cover at the base of the holes by using the gravels of 4 inches.
Step 2
Now take the metal posts and insert them into the holes, ensuring that each post is 56 inches tall. Once all the posts are in place, fill the holes with concrete, leaving one or two inches above ground level. Let the concrete dry for 24 hours.
Step 3
Drill through one of the 6 inches posts. This drilling should be done at the top portion, and you have to maintain a parallel position from where the gate will be installed. After that, insert a hinge and a J-bolt to secure the frame of wood with the posts. If needed, you can use additional nuts or hinge to make the attachment more secure. Repeat the process two feet below the first hole.
Step 4
After completing the installation of the first two posts, measure the distance between them and then subtract one inch from that measurement. It will allow you to acquire a smooth rotation of your gate. Next, cut six boards for installation in this length. The measurement of the board should be 1/6 inches. Set these boards and then position three other boards perpendicularly with a measurement of ½ x 3 x 36 inches. Now take additional boards of 3 and 6 inches and drill through them. After that, attach them with 1-inch wood screws.
Step 5
Now, place the gate against the j-bolt hook and straps locks between the posts. Drill into the hinge fittings through the door and fasten the hooks with 1″ wooden planks onto the handle. That’s it; your wooden gate is ready.
Frequently Asked Questions
Should Wood Fence Posts Be Set in Concrete?
No, you should not set your wood fence posts in concrete. Wood is a natural material, and it will decay over time. However, you can set them in the sand to prevent the decay of the wood by using an anti-fungal agent like copper sulfate, which will prevent rotting.
However, you can also set them in cement if you want to ensure that they are preserved for a long time without rotting or decaying.
What Size Gate Posts Do I Need?
The best way to figure out how big your gate posts should be is to measure the space between the fence posts and your property line. If there are no fence posts, you can measure from one end of the boundary line to the other using a string.
You can also do this on your own with a tape measure.
Will Wooden Posts Rot in Concrete?
Yes. Wooden posts will rot in concrete if they are not coated with sealant or paint.
It’s important to use the right kind of sealant and paint for your specific needs, as some types may be more effective than others.
