How to Repair Cracked Door Frame Hinge
If your door hinge is cracked, it’s important to fix it as soon as possible. A cracked hinge can lead to further damage and can make your door difficult to open and close. In addition, door frames can become cracked over time from normal wear and tear.
Crack repair is a relatively easy process and can be done with a few tools and supplies. If the crack is too big, the door frame will need to be replaced. This blog post will show you how to repair cracked door frame hinge. Follow these simple steps, and your hinge will be good as new.
Things You Will Need:
To Repair a Cracked Door Frame Hinge, You Will Need:
- A hammer
- A screwdriver
- A drill
- A saw
- Plywood
- Wood screws
- Cement glue
10 Ways on How to Repair Cracked Door Frame Hinge:
1. Use a Hammer
The first thing that you need to do is use a hammer to straighten out the door frame hinge. If the door frame hinge is severely damaged, then you might need to use a chisel in order to straighten it out.
2. Use a Screwdriver
If the door frame hinge is only slightly damaged, then you can try to fix it with a screwdriver. First, remove the screws from the damaged hinge using a screwdriver. Next, use the screwdriver to pry open the door frame hinges slightly. This will help to loosen the door frame hinge and make it easier to repair. Finally, use a screwdriver to align the door frame hinge and then replace the screws.
3. Use a Jigsaw
If the door frame hinge is severely damaged, you might need to use a jigsaw to cut out the damaged part of the hinge. Be very careful when using the jigsaw, and make sure to wear protective gear, such as gloves and a mask.
4. Use a Drill
If the door frame hinge is only slightly damaged, then you can try to fix it with a drill. First, use a drill bit that is the same size as the screws that hold the door frame hinge in place. Next, use the drill to create pilot holes in the door frame hinge. Finally, use screws to secure the door frame hinge in place.
5. Use a Saw
If the door frame hinge is severely damaged, then you might need to use a saw in order to cut out the damaged area. First, use a saw to cut along the crack, being careful not to damage the rest of the door frame. Once you have cut out the damaged area, use a piece of wood to fill in the gap. You can then either screw or nail the piece of wood into place.
6. Remove the Damaged Hinge
Once you have cut out the damaged part of the hinge, you can then reattach the door to the frame using new hinges. Use a screwdriver to remove the old hinge from the door. If the hinge is severely damaged, you may need to use a chisel to remove it. Once the old hinge is removed, you can then attach the new hinges.
First, align the new hinges with the holes left by the old ones. Then, use screws to attach them to the door. Make sure the screws are tight so that the door will be secure. Finally, rehang the door on the frame and check to make sure it is level.
7. Add a Support
If the door is still not level, then you might need to add support. Place the support under the door so that it is touching the floor. Use a level to make sure that the support is level before you screw it into place.
If the door is still not level, then you might need to add support. Place the support under the door so that it is touching the floor. Use a level to ensure that the support is level before you screw it into place.
8. Cut a New Hinge
Once you have cut out the damaged part of the hinge, you will need to cut a new one to replace it. Again, be very careful when using the jigsaw and make sure that you follow the lines that you have drawn on the door frame. Once you have cut out the new hinge, sand down the edges to smooth it.
9. Attach the New Hinge
Now it is time to attach the new hinge to the door frame. You will first need to drill pilot holes into the door frame. These will be used to screw in the new hinge. Be sure to use the same size screws that were holding the old hinge in place.
Once the pilot holes are drilled, screw in the new hinge. Start with the top screw and then move to the bottom one. Make sure that the hinge is level before tightening the screws all the way. Now that the new hinge is in place, your door should be able to open and close without any problems.
10. Prime and Paint the Frame
After you have repaired the door frame hinge, you need to prime and paint it. You can use a brush or roller to apply the primer evenly on the surface. Let the primer dry completely before painting the door frame. Next, apply a layer of paint to the frame and let it dry completely. You can add a second layer of paint if necessary.
Conclusion
The door frame hinge is a small but important part of your front or back door. This metal piece attaches the door to the wall and helps it swing open and closed. Unfortunately, over time, the hinge can become worn and cracked, causing the door not to close properly or even fall off its hinges.
If this happens to your home, don’t worry – there is an easy way to fix it! This article will show you how to repair cracked door frame hinge using just a few simple tools. If you have any questions, feel free to leave us a comment below. Thanks for reading!
