How to Build a Wooden Display Case

If you are love wooden items and love to make yourself your favorite ones, you will want to build something for your own house. The furniture and other things you make for your house will stay a long time and be part of your family history. There are many wooden items you can have at your home, but some simple things are always necessary, and a wooden display case will be a perfect item to have that you made yourself. So, if you are planning on making a wooden display case and need some help, we will help you with how to build a wooden display case.

Building an item of wooden furniture is not as easy as an expert will tell you. But if you have some knowledge of how things work and have the proper equipment, you will be able to make it with a little bit of more determination. Learning how to build a wooden display case may seem a bit too complicated, but you will figure things out quickly and start executing the plan if you read through the instruction well. So, without any further ado, we should start with all the steps.

Steps on How to Build a Wooden Display Case

Step One

The first step of any project should be gathering up all the needed materials. Whenever you are doing any wooden project, you should make sure that you have everything that you will need during the making at your hand available, or otherwise, you will not be able to go through half the work. Not only will the work need your patient, but it will also need your time, and you would not want to delay anything.

So, for this project, you will need-

  • Various sizes of plywood of your choice
  • Glass
  • Electric jigsaw
  • Router
  • Sandpaper
  • Glass
  • Electric screwdriver
  • Screws
  • Wood Glue

Step Two

After you are done gathering all the needed materials, you can begin with the first work of how to build a wooden display case.

The first thing you have to do is measure everything up.

If you are going to make a rectangular display case, then you will need two bases and four side bases. To make them, you have to cut the bottom and top floors according to how big you want them. As for the side ones, cut them according to the depth of the case.

Step Three

After cutting the pieces, you will have to set the top base aside as you will work with it later.

Now you need to join the four sides to the bottom base. You can use wood glue or screw for joining them. If you are using glue, you will not have any problem with joining them, but in case of screws, you will have to take a proper measurement. We will suggest you use glue as it is very easy to work with, but you will have to do with screws if you cannot find glue.

Step Three

Now that you have a box without a door made, you will start making the door. To make the door, you will have to attach the glass to the woods.

Take four pieces of wood straps according to the measurement of the box you just made. Cut each of the corners of the pieces in 45 degrees. The side one should be curved inward, and the other two should be outward.

Now using the router, curve the inside of those wood where you want to put the glass. After curving, start assembling everything. You can join the pieces with glue or screws, but we will suggest using glue as more comfortable.

Step Four

Before you can assemble everything, you have to sand everything to make them smooth. The first thing you have to sand is the box. You can sand them with sandpaper or sand machine, whichever is available to you.

After sanding the box, you have to sand the door. When everything is done, clean all the items properly to get rid of the residues.

Step Five

Now it is time to join the door to the box. To do that, you have to use a screw. Drill where you want the door to enter. One side of the door should be joined with screws, while the other should not be.

Step Six

You can add a lock to the display case so that you can keep everything safe. You can use any time of lock that you want. As long as the door stays intact, your work should be done. And after finishing them, you are done making the wooden display case.

Tips

As we have mentioned before, you should choose glue over screws on some parts. While adjusting the door, you may have to work with screws. But if you use screws for everything else and if you are someone who has not much experience of using screws, you can end up messing things. Drilling the wrong hole can lead to getting the whole work wasted. So, if you do not want to take the risk, better use glue.

Warning

It would be best if you were extremely careful while using the jigsaw and router. The router is a much more dangerous item, and one wrong move can lead to many accidents. If you have never used one before, you can seek the help of someone who has done this work before and ask them to teach you or perhaps help you with the work.

Final Thoughts

That was all from how to build a wooden display case. Hopefully, all the tips we have shared will help you make your desired display case or can give you some ideas to come up with something more gorgeous. The world of wooden work is always open to various ideas, and you will love to explore them more and more. We can only hope you make the perfect wooden display case for your home and cherish the work for many years.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo