Many of us may think that the hobby of modeling the train track is dying, but in reality, it is far from what we believe. A lot of people are still into model train track, and they are coming up with new forms and shapes. While in the real world, the train tracks are taking various transformation, it will not stay away from our model railway either. When all the developed countries have elevated train track, why not put our model train track into an elevated one. Hence, here is how to elevate model train track.

Coming up With the Plan

Before you set to make the whole thing work and learn how to elevate model train track, you will need to come up with the plans. Surely, we will help you figure things out, but we do not know how the materials you have work. Rather than giving you a layout of the whole plan, we will tell you how you can form the idea through an example.

The thing about model train tracks is that they are very innovative nowadays. As we said, the real-life picture of railways has changed, and now we have a different version where trains can run faster like a bullet or even run by upside down. So, it is not a surprise if the model train also has those designs in them.

But we will stick to the alternative that you only have the rail track pieces with the actual train. So, in this case, you probably do not have any supply to make an elevated track. But before you can think about the supply, you have to know what you need them for.

The plan will include how long and high the track is going to be. To complete the whole thing, you will need to do some basic math. What you are going to do is, find solid pieces that you can use as the levitator to keep the track high up and that you are going to call the pillars.

The next thing is that there is going to be a part from where the train track will start to elevate a little, and then it will reach the pick and come down back to the ground again. That is when you will need to first math skills. You need to cut out the pillars according to the elevation marks. The best way is to do it by a 1-inch gap. Also, you will need to figure out how much distance the pillars are going to have.

Let’s say; the pillars will be made of wood, have a gap of 1 inch, and stand 3 inches away from each other. That is the basic plan for your elevated model train track.


Gather up Materials

The next thing you have to do in how to elevate model train track is to gather all the materials needed for you to finish the project. The list of materials will be –

These are the essential materials you need to do the project. The wood will be required not only for the pillars but also as a base. You will need support where the posts will stay stick together. The glue that you should be using on the wood is called polyvinyl acetate, which is the best kind of wood glue.

How to Elevate Model Train Track: The Execution of Plan

So, if you are done gathering up all the materials, we shall begin with the journey of bringing the plan to life. Before you start anything, you need to remember the work will require your utmost patience and energy.

The first thing you should be doing is finding the appropriate place to execute the work and combing the whole model train track pieces together.

After you are done, putting everything together is when you would be starting with the actual work. And to begin, you will need the wooden base of the track to be fitted to the right place.

When you select a base, make sure it has the proper size and will not consume unnecessary space.

Now that you have the base ready let’s get started with getting the pillars ready.

It is now time to do your math and put them on the materials. The first thing you should measure is how high you want the track to be. Suppose, the track is going to be 10cm high, then there is going to be a center point where it reaches the top.

When you determine the center point, you should be subtracted 1 inch from the next and find how many pieces you need till you reach to the point where it will be easy for the track to lay flat on the ground.

Now that you have determined the pieces you need, we will start cutting woods and shaping them. You will need to use the electric saw for that. Cut each of the pieces of wood into fine shapes. File them properly so that there should not be any bumps.

Collect all the pillars, and now it is time to see the next math, which is what should be the distance of the pillar. As we have said before, it should be 3 inches apart, so you should mark the place accordingly.

Glue the pillars in the right place and wait for them to get dried. After they get appropriately dried, now it is time to put the track on top of the pillars and secure them.

There you are done elevating the model train track.


Final Thoughts

We understand the whole process may not be as easy as it sounds, but as we mentioned, you need to have your patience and give your energy to it. After all, it is most probably a part of your hobbies. We can only hope our tutorial on how to elevate model train track helps you fix everything correctly.

You May Read Also How to Make Decals for Model Trains