How to Get Hair Dye Off Tile Grout

We all know that hair dye stains can be tricky to remove, but did you know it’s even harder when the stain is on your grout? Tiles make it easy to clean and they help with the overall aesthetic of the room. However, hair dye can be a hassle if you have tiles that need to be cleaned up after someone’s been dyeing their hair in the bathroom.

How to Get Hair Dye Off Tile Grout

The grout between your tiles is porous, which means that just wiping down will not do anything about getting rid of those pesky strands of hair from your tile grout! For you to get rid of them, there are some steps you’ll need to take. This blog post will help you identify why hair dye stains are so hard to get off tile grout and what steps you should take to clean them properly. After reading this article, you’ll better understand how to get hair dye off tile grout.

What Causes Stains on Tile Grout?

Permanent hair dye drips, splashes, and spills happen all the time. Hair coloring accidents damage tiles, grout lines, and other bathroom surfaces every day. Unfortunately, commercial products to remove these stains are not effective.

No matter how much you scrub or what cleaners you use, the dye stains remain because colored dyes are composites of multiple chemicals. In addition, most commercial cleaners only remove water-soluble surface residue; they do not address the dye’s ability to stain.

Five Reasons Why You Should Get Hair Dye Off Tile Grout:

Even though hair dye stains can be annoying, they are more than that. Hair dye stain on the grout lines of your tiles can cause multiple problems for you and your home.

1. Avoid Toxic Fumes:

Unsightly and potentially harmful, hair dye stains on bathroom tile grout lines pose a significant risk to your long-term health. Exposure to ammonia, hydrogen peroxide, and other chemicals in permanent dyes can cause respiratory problems such as asthma and chronic obstructive pulmonary disease (COPD).

2. Avoid Messy Clean-up:

Dye spills often splash, splatter and drip onto the surrounding tile surfaces. In bad cases, this can lead to complete dye stains covering multiple tiles or even entire walls! Unfortunately, these messes are difficult to clean up as they spread across the grout lines of your bathroom’s tile flooring.

3. Avoid Difficult Clean-Up:

Hair dye stains on tile grout lines make it very difficult to clean your bathroom. An important step in keeping your home healthy and safe is regular cleaning, but this can be difficult when you have to scrub multiple tiles or walls that are stained. In addition, you risk scratching the surface of the tile with strong cleaners for a difficult clean-up.

4. Prevent Stains From Spreading:

Hair dye stains on your tile grout lines can cause permanent damage. You may try to cover up the stained tiles with rugs or couches, but eventually, they will be back. This is because dye spills are often impossible to clean up entirely and end up dripping down into the grout lines where you cannot reach them.

Hair dye stains on your tile grout lines can cause permanent damage. You may try to cover up the stained tiles with rugs or couches

5. Prevent Grout From Fading:

Hair dye stains on tile grout lines can cause the grout to fade or corrode over time due to constant contact with bleach or hydrogen peroxide used in coloring products. Gradually, your once-white tiles will become gray and dingy – an eyesore for your home.

You Can Check It Out to Paint Blonde Hair Acrylic

Step by Step Guide: How to Get Hair Dye Off Tile Grout

Here we have discussed the step-by-step guide on how to get hair dye off tile grout.

Step 1:  

Mix equal parts hydrogen peroxide, dish soap, and baking soda. Add small amounts of water until the mixture is about the consistency of slightly runny yogurt. Use a clean brush or sponge to apply the solution to the grout. Allow it to sit for five minutes before scrubbing with your brush or sponge.

Step 2:

After that, use a clean cloth and wipe away the solution and any product residue with it. Rinse the tiles again with clean water to remove all product residue. Dry the tiles completely before you let anyone walk on them again.

Step 3:

If the mixture doesn’t work after the first application, you’ll need more baking soda. Add it to your mix in one tablespoon increments until you have enough to make a runny paste. Apply that paste with your brush or sponge, then use your cloth to wipe away the paste residue.

Step 4:

Repeat applying baking soda paste and wiping it away as many times as necessary until the tile grout is clean. Then, allow the tiles to dry completely before walking on them again.

Step 5:  

If your grout is still stained after the hydrogen peroxide mixture and the baking soda paste have been applied, it may be time to call in a professional. Professional cleaners can use stronger solutions than you can make at home, or they may use steam cleaning to remove deeply embedded stains.

Step 6:

Wash all of your clothes and hair products immediately. This is a good idea even if you don’t think your hair color has stained the grout because it likely has.

Step 7:    

Wash all of your hair, floors, countertops, and anything else that has come into contact with the color dye. If you don’t do this immediately after the color has been on the tile for a while, it will be harder to get it off later.

Tips & Warnings:

Be careful when you are handling the hydrogen peroxide mixture because it can bleach the fabric. Also, avoid spilling or dripping some
  1. Be careful when you are handling the hydrogen peroxide mixture because it can bleach the fabric. Also, avoid spilling or dripping some of the mixtures onto other surfaces in your home because it could damage them too.
  2. Do not use the hydrogen peroxide solution if you have sensitive skin or allergies or are pregnant because it can cause painful irritation. When in doubt, test the solution on your arm before applying any of it to your hair so that you know how your skin will react to it.
  3. Make sure to avoid using this solution if your hair is already colored with another color besides black.
  4. This solution is not meant to be used as a shampoo and will not wash out all of the dye from your hair, but it may lighten it.
  5. A small amount of acetone or rubbing alcohol can be added to the hydrogen peroxide mixture if you wish to speed up the process and help it work more efficiently.
  6. Ensure to empty any remaining contents of the hydrogen peroxide mixture if you are finished using it. It could react with the bleach in your hair color and cause unpleasant odors or skin irritation if you don’t.

Conclusion:

A lot of people make the mistake of using a chemical cleaner to get hair dye off tile grout. Unfortunately, this only results in more damage and cost, so it’s best to use an organic cleanser that will not harm your flooring or cause any unwanted effects.

One popular option is Dawn dish soap because it has some degreasing power while still gentle on sensitive surfaces like stone tiles. These tips should help you figure out how to get hair dye off tile grout. If not, give us a call, and our team of experts will be happy to help you!

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo