How to Put a Chainsaw Motor on a Bicycle

Introduction

Chainsaw bike! Sounds spooky, right? But have imagined how much functionality you will be able to obtain with this bike. But to acquire that, you have first to learn how to put a chainsaw motor on a bicycle. Do you know how you can do that? Well, don’t worry; I have crafted this article so that even a layperson will be able to make his own chainsaw bike. So, let’s see how to do that.

How To Put A Chainsaw Motor On A Bicycle

Chainsaw bike! Sounds spooky, right? But have imagined how much functionality you will be able to obtain with this bike. But to acquire that, you have first to learn how to put a chainsaw motor on a bicycle. Do you know how you can do that? Well, don’t worry; I have crafted this article so that even a layperson will be able to make his own chainsaw bike. So, let’s see how to do that.

How To Put A Chainsaw Motor On A Bicycle

First of all, you have to remove the chainsaw’s cover and adjust the 10 MM V belt pulley with the chainsaw. Then take an engine mounting bracket; you can use the simplest one made out of scrap metals for this process. Next, mount the chainsaw with this bracket through its existing holes. Of course, this means you are gonna have to make the holes according to that position.

 After that, take a 26:1 worm gear reducer and adjust a 16-tooth sprocket with it. You may need to replace the center nut with a large one for that. Next, take a 10×350 V-belt and equip it with worm gear and the chainsaw machine. Finally, secure it on the mounting bracket properly.

Guide On How To Put A Chainsaw Motor On A Bicycle

Next, take a one-way bike sprocket and a 24-tooth sprocket. Weld them on one another. Remove the old wheel from your bicycle and equip this sprocket with it. Now set the wheel again and adjust the chainsaw machine on your cycle’s rear part of the carrier. Adjust the chains along with the sprockets, and that’s it; your chainsaw bike is ready to go now. You can now ride in your own will and go as far as you want to go.

Precautions

  • Wear safety goggles to protect your eyes from dirt and debris.
  • Make sure the chainsaw engine is off before you start working on it to avoid injury.
  • Use a piece of wood as a buffer between the handlebars of your bicycle and the spinning saw blade while attaching them with screws. This will prevent friction burns or injuries if they touch during operation.
  • For those who want their bike without brakes, use an old brake cable instead of the metal wire that connects both handles when pedaling backward for braking purposes.

The Benefit of Chainsaw Motor on A Bicycle

The benefit of putting chainsaw motor on bicycle is that the bike can go up and down hills without you having to pedal. The only thing you will have to do is turn your body in the direction that needs power, but it allows for easier pedaling when going downhill because there’s gravity aiding it.

It also means that if your feet get tired or hurt before you finish riding, which often happens with long or steep rides, then they don’t matter anymore! You’ll still be able to use them just as much as anyone else who doesn’t need their legs for balance.

Disadvantages of Chainsaw Motor on A Bicycle

Disadvantages of Chainsaw Motor on A Bicycle

The disadvantages of putting chainsaw motors on bicycles are that it is hard and time-consuming. You have to be very careful when drilling the hole for the motor since you can damage your bike and injure yourself if done wrong. It will take many hours either with electric tools or by hand, so make sure to put in enough effort before beginning this project. Otherwise, it won’t work out too well. There are other ways you could go about using a bicycle as transportation instead of pedal-powered bikes, which don’t require any fuel at all.

Do I have any recommendations for which brand makes the best chainsaw motors for bicycles?

You could probably make your own chainsaw motor with a couple of electric motors and gearboxes, but there are pre-made options as well. So the best advice I can give you is to find out what the top-rated bike for sale in your area is and then look at their manufacturer’s website or website that sells it (like this one).

Many bikes have parts available online, so they may be able to help as well. Plus, if you buy something from an established company like Trek Bikes who has been making bicycles since 1976, then you know that whatever part you need will fit perfectly!

Conclusion

Lastly, the process we have stated here will help put a chainsaw motor on a bicycle. This will surely help increase the performance of your commuter. Thank you and have a nice day.

You may also read now – How to Braid Leather Around a Handle

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo