How to Redirect Airflow From Vent

Introduction

Redirecting airflow is a method of changing the direction that air flows in your case while still using your front intake fans. This will allow you to improve cooling and also create a more uniform pressure throughout the case. Today I will discuss how to redirect airflow from vent to improve air circulation. So let us get into the topic.

How to Redirect Airflow From Vent

Step-wise Guide on How to Redirect Airflow From Vent

Step 1:

Take out the filters. Most of the systems have used mesh filters for filtering the air. They should be removed and taken to a professional place where they can wash them. If you are doing this job at home, open up all your windows so that there will be space between the ducts and make sure that vent is placed properly on top of them. Moreover, clean the grilles that are also installed outside.

Step 2:

Clean Out The Vents Properly. After cleaning out the vents properly, take an air fitting tool from your home supplies which has got sharp edges and pointed ends as well, and put it into each of the vent holes to check if there is any blockage or not by pushing the tool all the way to its depth. As soon as such blockages are found, just take them out, throw them into the trash bin, or use a broom to sweep them off.

Step 3:

Properly Connect The Exhaust To An Outside Air Vent. This is done by taking the air fitting tool with you again, which has an opening on one end of it that should be connected properly with the vent outside your house. Now, open up the exhaust fan so that there will be suction in between two vents but make sure that you have not yet flipped a switch for running any other fans inside your home because that may interfere with this test and won’t let it work perfectly well.

Properly Connect the Exhaust to an Outside Air Vent.

Step 4:

With A Switch On, See If There Is Any Leakage. Once you have opened up the fan, you can see any leakage that happens because, in case of a leak, air would get into your home through it rather than outside since exhaust fans work like a vacuum and suck out all the air inside your home. If this kind of leakage happens, then just make sure to install new grilles to eliminate such kinds of problems.

Step 5:

You Are Done! This is an action when you are completely done with the installation. Now, just flip a switch that controls the rest of the fans installed inside your house and watch them working properly after testing everything else before starting anything else at home.

You Can Check It Out to Jump Out a Vent Damper

Benefits of Redirecting Airflow From Vent

The main reason behind all these steps is to find any blockages or some leaks if there were any present in vent fittings because they need to work perfectly well at all times, which may result in ventilation problems inside your home. By redirecting the airflow from the vent, having ventilation problems will reduce significantly since now there won’t be any problem caused by not having enough power. If you ever experience a failure in your ventilation system at home, it’s best to consult with experts and professionals.

Ventilation Problems Will Reduce
 Significantly by Redirecting the 
Airflow From the Vent

That way, they can come up with the right solution for your problem. They will know what needs to be done to get everything in order so wait until they arrive, then make sure that everything is good to go by asking them if there are any problems they need to fix or anything else like that but as long as it’s done professionally and perfectly well then you shouldn’t have any problem whatsoever.

Precautions While Redirecting Airflow From Vent

The following precautions must be taken while you are redirecting airflow from the vent. These precautionary measures will protect you from getting hurt or any injury inside the air ducts and at the ends of air vents :

Wear Safety Goggles:

Before you start to perform this task, make sure that you are wearing safe working goggles. This will prevent debris such as dust particles from entering your eyes before going deep inside any air vent system.  

Ensure That There Is No Electricity Flowing Through Those Wires:

If there is still some doubt about where electric current is passing through inside the walls or ceilings, disconnect them completely. Or, if it’s still safe to work with the wires, wear rubber gloves and use tape or clamps and seal all outlets after removing them. If you are not sure about anything about electrical wiring, then always call a licensed electrician.  

 Give Vent a Good Wipe Off:

Vent can be cleaned using a dry rag or a vacuum cleaner. Ensure that there is no dust or debris left inside the vent system before proceeding further.    

Wear Proper Clothing:

Always wear proper clothes while performing this job inside air ducts and vents. This will prevent you from getting hurt due to falling debris inside the air ducts during the ventilation redirecting process.  

Don’t Make Any Structural Changes in the Vents:

While doing this type of work inside the air vent, make sure that you do not change or alter any structure of the ducts. For example, you should never install smoke detectors on top of supply shafts. Instead, just look at what is already there and see if it can be done more easily.

Make Sure to Check for Vent Obstructions and Ensure Proper Flow Before Redirecting Airflow:

Before executing the job of redirecting airflow from the vent, make sure that all obstructions are obliterated from the ventilation system and clean them up completely using a vacuum cleaner or dry rag. After completely removing all kinds of obstruction from the ventilation system, proceed further towards the redirection process.

Conclusion

It’s really not that complicated as it sounds like, but it surely takes some time, and a lot of patience is needed for doing this job at home. I hope you have obtained a clear idea of how to redirect airflow from vent, ensure proper precautions during the process. Thank you, and have a good day!

You may read also –

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo