How to Remove Fedders Air Conditioner Cover

If you own a Fedders air conditioner, then you know that it is important to keep the cover on at all times. The cover helps protect your air conditioning unit from damage and also keeps pests out of the inside of your home. Air conditioning units are expensive to replace, so it is best practice to make sure they stay in good shape for as long as possible! 

However, if you want to know how to remove fedders air conditioner cover, we might help! There are several steps involved in removing the cover, and it is important to make sure that you go step by step. This blog post will teach you what tools and materials need to be at hand before starting this project and provide instructions on how to remove the cover from your Fedders air conditioner. 

How to Remove Fedders Air Conditioner Cover

Things You’ll Need

Here is a list of tools and supplies that you will need to remove your Fedders air conditioner cover:

  • A hammer
  • A flathead screwdriver
  • An adjustable crescent wrench
  • Masking tape 
  • A towel or sheets 
  • Respiratory protection mask or respirator
  • A roll of duct tape

12 Steps to Follow: How To Remove Fedders Air Conditioner Cover

Step 1: Turn Off Your Fedders Air Conditioner

First, make sure that you turn off your air conditioner unit completely and unplug it. It is also recommended that you turn off all of the power to your home at the breaker box before starting this project. If you do not know how to, please ask someone in your family or a professional for help!

Step 2: Remove the Grill and Covers

Next, you want to remove the grill that shades your air conditioner. To do so, begin by removing any screws using a flathead screwdriver. Then, remove all of the attachments from above and below this grill using an adjustable crescent wrench or pliers. Don’t forget the plastic caps at the top and bottom of your air conditioner!

Step 3: Remove the Filter

Now, remove your air filter, which should be located inside of a box or chamber. You will need to take out all of the screws holding this in place using a flathead screwdriver. Then use an adjustable crescent wrench or pliers to remove it from the chamber.

Step 4: Remove the Wires and Cables

Next, you want to unfasten all of the electrical wires that are on your air conditioner unit. Begin at the bottom of your air conditioner and work your way up towards where the cover attaches.  Some people find that using a little bit of masking tape and labeling the wires make this process easier.

Step 5: Remove the Heat Exchanger Covers

You will now want to remove the heat exchanger cover on your air conditioner unit. This is located behind where your filter situates, making sure that you are removing it in a well-ventilated area. To do so, use a flathead screwdriver and begin prying off the cover. Again, it might be helpful to work from several angles until you get it off of your air conditioner.

Step 6: Remove the Exterior Cover from Your Unit

Once you have removed all of the screws holding the exterior cover in place, you will want to take this cover off and lay it down on your protective surface. 

Step 7: Remove the Protective Sheets

Removing the plastic covers and sheets off of your air conditioner unit is very important because this is what helps keep pests from getting inside your home. So, when taking them off, make sure that you are not damaging them. To do so, begin by removing the screws that are holding them in place with a flathead screwdriver.

Remove the Protective Sheets

Step 8: Remove the Inner Covers

Now you will want to remove any plastic covers or sheets in the interior of your air conditioner unit. Having done this, there might be some dust and dirt inside of your air conditioner unit. So, you might want to take out your vacuum cleaner or a brush that can remove dust and dirt.

Step 9: Remove Filters from Intakes

You will now want to remove the filters from inside the intakes in your air conditioner unit. To do so, begin by using an adjustable crescent wrench or pliers to unscrew the screws.

Step 10: Remove Old Duct Tape from Your Air Conditioner Unit

After taking your air conditioner apart, you will find that there is most likely a little bit of duct tape on it. So, use an adjustable crescent wrench or pliers to remove this tape. You might also want to use an air compressor to blow out any leftover tape particles.

Step 11: Restore Your Air Conditioner Unit

Now that you have completed your project be sure to restring all of the wires and cables back into place on your air conditioner unit. You will also want to put all of the screws back in their places when restoring your air conditioner unit.

Step 12: Reattach Your Air Conditioner Unit

Finally, you will want to place all of the filters and any other material you removed back into your air conditioner unit. An easy way to remember how everything should be placed is by looking at pictures of an original installation.  It is also a good idea to make sure that you have all of the screws, wires, and cables in the right places before putting your air conditioner back together.

Some Tips & Warnings

  • When you remove your air conditioner cover, make sure that it is in a well-ventilated area.
  • Have all of the correct tools for the job. For instance, you will need an adjustable crescent wrench and pliers to remove metal or plastic parts from your air conditioning unit.
  • When reattaching your air conditioner, make sure that you have all of the wires and cables in the right place. If there is anything wrong with them or are not working correctly, it could damage your entire air conditioning unit.
  • Step back and take a look when you are finished. Ensure that everything is in the correct place and that all of your air conditioning unit parts are still intact.
  • Be sure to turn it on for a test run after you finish putting your air conditioner back together. This will ensure that everything is working correctly. You don’t want to wait until you need comfort from your air conditioning to realize that you didn’t connect something the right way.
  • Most air conditioning units come with a “self-diagnostic” feature. This tells you if there is an error on your air conditioner unit or not. For example, if you hear a beep when turning it on, this means that there are some parts of your air conditioner unit that are not in place.
Air Conditioner Placement.

Conclusion

If you’re interested to know how to remove fedders air conditioner cover, there are a few steps to follow. Firstly, be sure the unit is off and unplugged from power sources. Secondly, locate the screws on top of the cover and remove them with a Phillips screwdriver or an Allen wrench. Thirdly, lift one side of the cover at a time while holding onto it tightly so that air doesn’t escape as you go about this process.

Finally, use either pliers or heavy-duty scissors to cut any excess ducting tape leftover after taking off all four corners on each side of the AC’s housing before gently pulling it out by hand if possible. We hope this blog post was helpful, and you are now remove your Fedders Air Conditioner Cover in no time. If there is anything you need further assistance with, please don’t hesitate to contact us!

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo