How to Remove Pen Ink From Rubber Phone Case
Introduction
A rubber phone case is a protective cover for mobile phones used to protect the device against shock and scratches. It fits the shape of your phone and acts as an extra layer between the phone and everyday items such as keys or coins. You might not be so familiar with this kind of mobile case due to its recent boom in popularity only a few years ago.
Nevertheless, rubber cases are a great option for protecting your devices without putting them through too much hassle; these days, you can find many different colors, styles, sizes, prints, and even textures that cater to most types of users’ tastes.
But they might not all be so easy to maintain – especially if you have children using one! In this article, I will discuss how to remove pen ink from rubber phone case.
Summary: If you have ink smudges or droplets on your rubber phone case, here is how to remove it: 1. Wet a cloth with warm water and wring it out. 2. Wet the tip of the cloth with acetone or nail-polish remover and use it to lightly scrub the affected area. 3. Rinse the area with water and dry it off. 4. Apply a clear sealant if desired.
Step-wise Guide on How to Remove Pen Ink From Rubber Phone Case
Step 1 – Apply Ice Cubes to the Pen Ink on Rubber Phone Case:
Take some ice cubes and put them in a container/cup. Now, place your rubber phone case on top of the ice cubes and allow it to rest for around 15 minutes. It will help reduce brain function until you have washed the marks off completely with lukewarm water.
Step 2 – Use Lukewarm Water to Remove Pen Ink from Rubber Phone Case:
Put some lukewarm water in a beaker or bowl and soak in your rubber phone case inside it for about 10 minutes. By this time, most of the pen ink should be removed from rubber phone cases. Now, gently scrub the pen ink marks with a soft-bristled toothbrush.
Note: Be careful while using lukewarm water for cleaning purposes as it can be boiling and cause skin burn!
Step 3 – Apply Few Drops of Detergent Solution to Rubber Phone Case:
Take some detergent solution in a bowl or on a cotton ball/rag and apply it on the rubber phone case. Allow it to stay there for about 5 minutes so that the detergent solution could do its task completely! Let the phone case air dry overnight or for at least 12 hours before use.
Step 4 – Use Cloth Scratch awl to Remove Pen Ink From Rubber Phone Case:
Take your rubber phone case and dip it into a bucket of water. Now, take the cloth scratch awl, press down on the rubber phone case, and gently slide it across the pattern of the ink stain.
Step 5 – Use Sand Paper to Remove Pen Ink From Rubber Phone Case:
If nothing seems to work for you, then try sand-paper! Take some fine-grade sandpaper (or any other rougher grit) and apply it gently over the surface where you want to remove pen ink from the rubber phone caNext, gentlyNext, gently rub back and forth with medium pressure until every bit of pen ink has been rubbed off.
Step 6 – Use Toothpaste or Hand Sanitizer to Lighten Pen Ink Marks on Rubber Phone Case:
If you have tried all the steps mentioned above, and still nothing has worked for you, try whitening toothpaste or hand sanitizer. Lightly rub it onto the rubber phone case where pen ink marks are present and leave it there for about 10 minutes. Rinse off with lukewarm water as soon as possible!
Step 7 – Use Bleach on Rubber Phone Case to Remove Pen Ink:
If everything fails and you don’t know what else is left to do! Try bleach! Mix some detergent solution with bleach (one cup of water mixed with half a cup of household bleach) into a bowl or bucket. Dip your rubber phone case in the mixture and remove it after a few minutes keeping in mind not to submerge it completely! Remove any excess bleach with a clean cloth and let your rubber phone case dry in the shade.
Step 8 – Use Toothpicks to Remove Pen Ink From Rubber Phone Case:
Take some toothpicks (or matchsticks) and place them underneath where you have marked on the rubber phone case with your pen. Then, apply pressure on top and slide it along the stain until all of the pen ink is removed from rubber phone cases.
How to Take Care of Your Rubber Phone Case?
Rubber phone cases are reliable protectors for your beloved phones. They have a distinctive feature, making them look stand out and conspicuous from other types of protection materials. However, rubber is an elastic material.
Therefore, it can be damaged easily by some foreign objects hitting it. In case there are stains or ink on the surface of your rubber phone case, you should not panic because you can easily remove it without having to spend too much money to replace the whole thing with another one.
The first step is to wash off the stain gently using your bare hand not to damage the case more than its original form. Then, you have to use a soft and clean cloth to wipe off the unwanted mark or stain. The last step is to let it dry by exposing it under the sunlight or any light source, but if you cannot do so, use a hairdryer instead of leaving it wet.
How to Dispose of A Rubber Phone Case?
It is a common sight to see people carrying around rubber phone cases these days. Folks do so for various reasons like protecting the phones from damage, enhancing their beauty, or simply adding a bit of color to their lives.
However, with time, all products tend to wear out and require replacement as nothing can last forever in this world. So, after the phone case gets old and damaged, how to dispose of it comes?
One of the many generally used methods involves having it incinerated along with other waste material and converted into ash within an industrial furnace. At present, there are no specific laws put forth by any government agency that regulate disposal procedures for such items. In fact, there isn’t even a dedicated recycling plant set up for the job.
This means that to dispose of a rubber phone case, one must ensure that it is processed along with other items at the incinerator site and converted into ash without further damage to its environment or ecology.
Frequently Asked Questions
What Is the Best Ink Stain Remover?
There are many types of ink stain removers available in the market but there is no specific one that works best for every type of stain. To find out which one is best for your particular color, it would be better to try them out and see which one you like the most.
However, a few common ingredients found in ink stain removers include dish soap, hydrogen peroxide, bleach, ammonia, and water.
Can Baking Soda Remove Ink Stains?
Yes, baking soda can remove ink stains. You need to mix a small amount of baking soda with water and apply it to the stain using a cloth or sponge. After that, leave it for about 20 minutes before scrubbing it off with an abrasive brush.
However, there are some limitations to this method, such as:
• The color of the ink may remain in the fabric after scrubbing.
• It may not be effective if the ink is already dry.
Does White Vinegar Remove Pen Stains?
White vinegar is a great way to remove stains from a variety of surfaces. The first step in removing pen stains is to use warm water and a cloth soaked in white vinegar to clean the stain and any surrounding area. If this doesn’t work, try scrubbing with baking soda or toothpaste before moving on to other options.
Conclusion
I hope this article has been beneficial for learning how to remove pen ink from rubber phone case. Ensure all the precautions while performing the process. Thank you and have a nice day!
