How to Remove Sticky Labels From Glass Windows


How to Remove Sticky Labels From Glass Windows

Glass windows are used for a lot of purposes. For example, they can be used in building houses or offices and also be found in vehicles such as buses and trains.  They can also be used in industrial factories. They are usually made of glass and have an outer layer that keeps them shiny and clean-looking. The main purpose of installing them is to allow airflow within a certain environment.

Sticky labels are adhesive papers that have different printing on them. These labels are usually affixed to the surface using glue or other adhesive substances to stay there permanently. It could be product labels, price stickers, children’s game pieces, and many more things like these. In this article, I will discuss removing sticky labels from glass windows. So let us get started.

A Detailed Guide on How to Remove Sticky Labels From Glass Windows:

Step 1:

Fill the hot water in an obedient vessel as much as possible, conveniently cover your glass window with it and ensure the label is immersed inside.

The first step is to fill a bucket with hot water. Then, dip the sticky labels you want to remove into the bucket and keep them submerged for several seconds. For best results, repeat the process 2-3 times.

It’s important to mention that if there are any PVC stickers on your glass window, then you shouldn’t use boiling water directly on these stickers because they may melt under such heat treatment. In such a case, don’t worry.

Take one or two pieces of cloth and wet them properly until they become soaked by using warm water (not too hot). After that, just lay these clothes on the PVC stickers and leave them for several minutes. When you remove the cloths, your PVC labels will most likely fall off easily with a gentle hand wipe.

Step 2: Rub The Sticky Labels With A Paper Towel

Rub The Sticky Labels With A Paper Towel

After soaking the sticky labels with hot water, as mentioned in Step 1, gently rub them with a clean paper towel (be sure to use one that is not printed on both sides). Do it repeatedly until all the adhesive is removed completely.

Note: Another option is to rub this area gently with a rubber glove instead of using a paper towel. It works like magic!

Step 3: Wash The Area With Clean Water

After completing the above-mentioned Step 2, rinse the label-free glass with clean water. Wipe it dry with a clean cloth or paper towel afterward. If you have any questions regarding this article or want to comment, please share them using the form below. Please do not use this space for commercial purposes.

Lastly, we hope our content could help you solve your problems related to removing sticky labels from glass windows as quickly and as simply as possible without damaging them!

Step 4: Rubbing Alcohol To Clean The Glass Windows After Removing Labels With Paper Towel or Rubber Glove:

To further clean and remove all traces of adhesive left on your glass window after labeling it, you can use rubbing alcohol. Again, the procedure is quite simple:

First, you should pour some rubbing alcohol into a spray bottle or an empty and clean plastic container; then, rub the mixture on the glass window with a towel or sponge to clean it off completely. Don’t apply too much pressure while doing this because you may damage your window if you do that. In the end, wipe it dry with a cloth and leave no traces of labels behind on your glass windows! 

Step 5:

After removing labels from glass windows by using any method out there below recommended, if the entire surface looks dull and lifeless, here is what you need to do:

Get a new piece of paper towel (make sure it’s not printed on both sides) and pour baby oil on it until the towel is soaked with an even amount of baby oil. After then, rub this towel over the glass window to bring back its natural shine.

That’s all! You can enjoy a new look of your window now without spending a fortune on repainting it or replacing its glass altogether! If you have any questions regarding this article or want to comment, please share them using the form below. Please do not use this space for commercial purposes.

You Can Check It Out to Stop Dust Coming Through Windows

Precautions While Removing Sticky Labels From Glass Windows:

Precautions While Removing Sticky Labels From Glass Windows

While removing the old label on glass windows. Pieces of broken glass can fall off while removing them. Try to remove the broken pieces using a razor or any other sharp object if they are available. Please remove all this debris from your working area by disposing of it in a dustbin; otherwise, minor particles may get stuck in your eyes while cleaning.

Before starting the procedure, make sure that you have enough time at hand (at least 20 minutes) to complete this task without facing any problems later on.  If much more glue is left after removing the major part, it may take a longer time and little effort.

To make the task of removing labels from glass windows easier, your windows should be in good condition and free from any color tint.

The label’s surface has to be dry for removal, so if it is a rainy day, wait until they dry off naturally to remove them easily. If some particles are on your windows after removing the old glue, wipe them off with a damp cloth soaked in vinegar.

Wear eye goggles or glasses when peeling off the label, as small pieces may fall while doing this. Also, please wear long enough clothes because some excess glue may spill out on them.

When heating the sticker, use an iron but don’t keep it for too long over the window as this may cause damage to the surface of your glass window. While peeling off the sticker, use a sharp knife or any other sharp object available to peel off pieces cleanly; otherwise, you might end up with torn and ripped pieces.

Ensure that you are doing all these steps on a smooth surface so that the label gets removed properly, and also check for any rough edges before using them in your room.

Frequently Asked Questions:

How Can I Reuse Stickers on Glass Windows?

You Can Put Stickers on Glass Windows

Window stickers are a great way to boost sales, advertise the business and attract customers. You can put them on glass windows, but what do you do when they get dirty or peel off? It would be nice if there were a way to reuse your window stickers without the process of applying new ones every time.

Here’s how it works: Use double-sided tape that is at least ½ inch wide. Find a surface where you can repeatedly reposition the sticker until you’ve got it in the right location. Next, cut out a piece of masking tape about 1/2 inch longer than the width of your window sticker.

Rub down one side of the masking tape using clear nail polish, then press that sticky side onto the back of the window sticker. Then press the other side onto your glass window and use your hand to smooth it out, ensuring it sticks down all around the edges.

As time passes, if you need to remove or reposition your stickers on glass windows, simply pull them off gently and then apply nail polish remover to dissolve the glue underneath. Once that’s done, peel up each corner of the sticker one at a time until you can get most of it off without wrinkling or damaging it.

Does WD-40 Remove Stickers From Glass?

Removing labels from glass windows can be a difficult and time-consuming task. So while you may be tempted to throw these items in the trash, consider instead of giving them new life by upcycling them into notepads or calendars.

If necessary, use an ice pick or an awl to pry up stubborn pieces of label that have become attached to the windowpane. Thoroughly clean the window with soapy water and a washcloth. Dry thoroughly using paper towels or cloth towels. Apply a small amount of WD-40 directly to the surface where the sticker was applied. A cotton ball will work as well. Use plastic tweezers dipped in hot water to carefully remove the sticker residue. Clean up any leftover pieces with soapy water.

Use WD-40 on the dirty, greasy, or grimy glass to make the surface readable again. In addition to removing stickers from windows, it can be used for cleaning and shining an assortment of things around your home, including grills, gutters, chrome faucets, and even rubber boots and outdoor toys. If you store fishing rods in a rod holder made out of metal, apply some oil to it after using WD-40 for the best protection possible.


I hope this article has helped provide all the relevant information regarding how to remove sticky labels from glass windows. Ensure all the precautions while performing the process. Thank you, and have a nice day!

Please leave a reply if the article on how to remove sticky labels from glass windows is helpful to you.

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly