How to Unstick a Starter Motor

If you’re looking for a way to get your car started, then this blog post will be perfect for you. This article will tell you how to unstick a starter motor so that it can start up again. In addition, you’ll learn what the cause of the problem is, as well as the solution. The starter motor is an important part of your car’s engine. It is responsible for starting the engine by providing the initial power to turn the crankshaft.

We will also give tips on how to avoid getting your car stuck in the first place. Unfortunately, the average person is not equipped with all the knowledge needed for this particular situation, so that’s why we have come up with these solutions for you! Cars tend to get stuck in different ways. on a hill. In both cases, the car is not able to move forward or backward.

Starter Motor

8 Reasons Why Starter Motor Get Stuck:

The starter motor on a car can get stuck for many reasons. Following are 8 of the most common causes:

Low Fuel Level in Engine:

The first reason your starter motor might have problems is that it doesn’t have enough fuel to run. If you’re low on gas, then this will cause your engine not to start and your starter motor to give out. So always check the gas level in your car before attempting to use it, even if you did fill up just yesterday. Another reason your starter motor may have problems is that it’s low on oil. If you don’t have enough oil in your car, then this will cause your engine to seize up and your starter motor to give out.

Overheated Engine:

The second reason why a starter motor can get stuck in that the engine gets too hot. If you do not let your car cool off for at least 30 minutes after driving, this will prevent the engine from starting. This is due to the fact that the engine will be too hot and will not have time to cool down. Another reason why a starter motor can get stuck in that the battery may be dead. If the battery is completely dead, then the starter motor will not work.

Windshield Washer Fluid is Empty:

If your windshield washer fluid is empty, then you might have a hard time getting your car started. This is because water gets in the way of the metal parts inside the starter motor, which means there will be too much friction for the motor to work. If your starter motor is not working, then you can try adding some fresh water to the windshield washer fluid reservoir. This will help to lubricate the parts inside the starter motor and allow it to work properly again.

Loose or Broken Starter Motor Wire:

Your car won’t start if there is a loose wire connecting your starter motor to the battery. This causes electrical shorts and other problems, making it hard for you to get your car started despite everything else working properly.

Dirty Battery Cables:

If your battery cable is dirty, wet, or loose, this will make it difficult for you to start your car. The electricity won’t travel from the battery terminals as easily and efficiently as it should because of these factors, which means less voltage going to the starter motor chamber.

Faulty Starter Motor:

If your car has been sitting outside or in high-temperature areas for a long period of time, then this may cause damage to the starter motor. If this is the case with you, you’ll need to replace the starter motor to start working properly again.

Dirty Battery Terminals:

A simple way to fix a dirty battery terminal is to clean it with a wire brush. This will remove the corrosion from it and allow for better contact between the terminal and the battery, making it more efficient.

Cleaning The Battery

Loose or Broken Battery Terminal:

A loose battery terminal can prevent you from starting your engine because of how inefficient this causes electricity to travel from the battery terminals to the starter motor. A loose connection causes the electricity not to travel as efficiently, which means less voltage going into the starter motor and more strain on your battery.

Instructions: How to Unstick a Starter Motor 

Step 1: Fill up on Gas.

Before you attempt to unstick a stuck starter motor, the first thing you will need to do is fill your car with gas. This is because if the gas tank is low, there won’t be enough fuel pressure for it to work properly.

Step 2: Let the Engine Cool down.

When your engine overheats, it can cause serious damage and problems that will make it hard for you to use your car again soon. Therefore, before starting your vehicle, the best thing that you should do is let it cool off completely so that there are no dangers of further damage immediately after getting started.

Step 3: Check your Windshield Washer Fluid.

A simple way to start your car without any problems is to check your washer fluid before you attempt to start it. This will ensure that you don’t have any issues with water getting in the way of the metal inside the starter motor, which can cause additional friction and make it harder for you to get it started.

Check out to learn to Fix a Windshield Wiper That Won’t Move

Step 4: Check the Motor Wire Connection.

Sometimes a loose or broken wire can be the cause of your starter motor not working properly. A loose wire essentially means less contact between the battery and the starter motor because of this, which makes it harder for you to get your car started again.

Step 5: Check the Car battery Cable.

A car battery cable that is dirty or loose can cause your starter motor to become inoperable, and hard for you to start your engine again. This is because there will be less contact between the terminal and the cables, which causes electricity not to flow through as easily as it should.

Step 6: Check the Starter Motor.

Check any number of things that could be causing the starter motor to become inoperable. This includes the size, shape, and power that it is producing to work properly again.

Step 7: Replace the Broken Parts.

Replace the parts on your car that are broken or damaged to ensure that you can get your car going again. The best way to do this is to buy an aftermarket part, such as a starter motor replacement.

Replace the Parts on Your Car That Are Broken

Step 8: Allow the Engine to Completely Cool Off.

When you attempt to start your engine back up, make sure that it has completely cooled off first. If it hasn’t, then this can cause damage to the engine from overheating immediately after starting again, which can cause additional problems.


The most common cause of a broken starter motor is corrosion. When water or any other liquid gets into the connection between the solenoid cable and terminal block connectors, they corrode away from each other until there’s no contact. We hope you have enjoyed reading and find your answer on how to unstick a starter motor, and we can’t wait to see what you think!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly