How to Use Baking Soda to Clean Carpet

Cleaning your carpets can be a difficult task. It takes time and patience to do this job well, but the benefits are worth it. Over time dirt, food spills, and body oils build up on carpet fibers. This makes them feel flat and less soft than they used to be. In this blog post, we will show you how to use baking soda to clean carpets! 

How to Use Baking Soda to Clean Carpet

For cleaning solutions like shampoo or detergent to work effectively on carpeting, there needs to be a good water supply to absorb into the rug’s fibers. Baking soda is an excellent solution because it absorbs moisture from the air allowing the liquids in any cleaning solution you use to have better access to penetrate deep into those carpet fibers. Read on to know more!

10 Reasons Why Use Baking Soda to Clean Carpet:

Baking soda is excellent to clean carpets because it’s economical, absorbent, nontoxic, and, most importantly, cleans the carpet without leaving residue. Here are ten reasons you should consider using baking soda to clean your carpets instead of store-bought cleaners:

1. It’s natural

No harsh chemicals are used, so there is no risk of skin or eye irritation or respiratory problems.

2. It’s cheap

It’s less than 2 dollars for a box that can clean your carpet for years.

3. It works better

This cleaner not only absorbs dirt and odors, but also lifts stains out of the carpet fibers. Most store-bought cleaners just mask odors with fragrances, but this cleaner leaves your carpets looking and smelling fresh and clean.

4. It doesn’t leave residue

Because baking soda is absorbent, it doesn’t leave a layer of scum on your carpet.

5. It’s great for allergies

Baking soda is an excellent way to combat dust mite allergies. Not only does it absorb moisture, but it also eliminates odors that can trigger allergy symptoms.

6. It neutralizes odors

Since baking soda is an alkaline substance, it lifts dirt and odors out of the carpet fibers – unlike acidic cleaners, which only temporarily cover up odors.

7. It’s better for your health

Again, no harsh chemicals are used, so there is no risk of skin or eye irritation or respiratory problems. Plus, you won’t have to worry about toxic fumes or wearing a mask.

8. It’s environmentally friendly

The baking soda box can be used to clean the carpets and then reused for storage when its contents have been used up. No other chemical cleaners can do that!

9. It has other uses around the home

Aside from being an effective cleaner, baking soda is also a great beauty aid and teeth whitener.

10. It’s nontoxic

No cleaning supplies have to be hidden out of reach of children and pets because they’re not dangerous to them at all!

You Can Check It Out to Make High Traffic Carpet Look New

Step by Step Guide: How to Use Baking Soda to Clean Carpet 

Discreet Area With a Mixture

Step 1:

Before using baking soda on your carpet, test a small, discreet area with a mixture of vinegar and water to make sure the fabric is colorfast. If some color is removed from the carpet, do not use baking soda.

Step 2:

Gently sprinkle dry baking soda on the soiled area of the carpeting. Apply more baking soda if necessary to cover up all spots/stains on the carpeting. Do not rub in. Let it sit for at least 30 minutes or longer if necessary.

Step 3:

Use a vacuum to remove the baking soda from the carpeting. This step will assure that deep cleaning is accomplished after all stains and odors have been removed from the carpeting.

Step 4:

If the baking soda was not wholly removed from the carpeting, repeat the process until all of the baking soda has been removed. Do not let the baking soda sit on carpeting for an extended period. You can also add a half cup of white vinegar to the baking soda solution to help remove any remaining residue from the detergent.

Repeat the steps above if necessary. If your carpet still smells like soap, try hiring a professional to clean it with special chemicals.

You Can Check It Out to Refinish Stairs That Were Carpeted

Tips & Warnings  

  1. 1You may need to adjust the amount of baking soda used depending on the size of the carpeting that is being cleaned.
  2. If carpeting has not been professionally cleaned in a while, you may want to test a small, discreet area with vinegar and water before using baking soda just in case there is some color loss from the carpeting.
  3. To avoid discoloration, it would be a good idea to test out the baking soda on an area of carpeting that is not visible before using it on a large area.
  4. Always check the label for any special instructions or precautions carpet manufacturers provide before using baking soda to clean carpeting.
  5. For best results, vacuum carpeting 2-4 times after using baking soda to clean carpeting.
  6. If there is a musty odor after cleaning, treat the carpeting with an enzyme cleaner and let it dry before vacuuming.
  7. If stains are not eradicated by baking soda, try treating the carpeting with an enzyme-based cleaner before vacuuming.

How Long Do You Leave Baking Soda on Carpet?

How long you leave baking soda on the carpet depends on the type of carpet. For example, carpets with more texture or dirt will require a more extended period than flat carpet; therefore, baking soda is best left for at least an hour before vacuuming so it can properly clean your carpet.

It’s also important to check the manufacturer’s instructions for special treatments. If you are in a hurry, try using your carpet’s upholstery attachment to agitate the baking soda into the fibers. A stiff-bristled brush can also help dislodge dirt on some carpets. However, be careful not to scrub too hard, or you could damage the fabric of your carpet.

You can also check out how to Clean Car Engine Inside

Should You Put Baking Soda on Wet or Dry Carpet?

When Baking Soda Falls  on a Wet Carpet

When baking soda falls on a wet carpet, the liquid is often absorbed, and the baking soda settles into the carpet’s fibers, making it difficult to remove. It can even stain your carpet if left too long without brushing off. If you’re wondering how to use baking soda on a carpet that is already dry, sprinkling it onto a section of carpet and using a brush to work it into the carpet fibers will suffice.

Sprinkle a generous amount of baking soda onto the affected area, about an inch in diameter. Then, use either a scrub brush or your fingers to thoroughly rub the powder into the carpet fibers by rubbing in circles motions. This should remove any dirt that has been embedded into your carpet from the spill.

Final Words

Baking soda is a great way to get rid of odors and remove stains from carpets. In addition, it can be used as an all-natural fabric softener for clothes or sheets. However, keep in mind that this method should not be used on wool rugs because baking soda will cause them to deteriorate faster than usual.

If you’re looking for other natural cleaning methods, try vinegar mixed with water! It can clean just about anything without any harmful chemicals. We hope this blog post on how to use baking soda to clean the carpet has been helpful. Let us know your thoughts in the comments below!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly