How to Clean Split AC Drain Pipe
To start cleaning out the drainpipe on your Ac Unit, turn off the power supply before opening any panels or doors, so it does not come alive while being worked on. Read on for more information on cleaning split ac drain pipes so your AC can work properly again!
One of the most common plumbing issues is clogged or split water pipes. The best way to fix this issue is by cleaning the pipe with vinegar and baking soda. This can be done by mixing both ingredients in a pot, heating it until it boils, and pouring it down the drainpipe while running hot water over it to rinse off any remaining residue.
Make sure that you do not pour boiling liquid into your sink, as this could cause severe damage! Instead, you will need dish soap, baking soda, vinegar, and boiling water.
7 Reasons Why You Should Clean Split AC Drain Pipe:
1. It is safe to assume most people dread cleaning drain pipes because it’s what you must do when your ac drain pipe splits or leaks water.
2. The dangers of having a clogged drain pipe are that it can cause water to leak inside your home. Being undetected can lead to damage and mold. It could also cause rusting on the motor, which will bring down the overall performance of your ac unit.
3. The benefits of cleaning a split or leaking drain pipe are numerous. Not only can you prevent water from leaking into your home and causing further damage, but you can also prolong the life of your AC unit. Regular cleaning is essential to keeping your home in top condition.
4. To clean a split ac drain pipe, you’ll need a lye-based drain opener.
5. To use the lye-based drain opener, pour it into your AC unit at least 1 hour before turning on the ac.
6. You should brush the drainpipe with a wire brush to help remove any buildup left behind.
7. You should also use your vacuum cleaner to clean inside the ac unit. This will suck out any dirt or dust that may have fallen into the drainpipe or drainage hole.
10 Ways on How to Clean Split AC Drain Pipe:
1. Use a wire:
You Can Check It Out to Make Solvent Cement for PVC Pipe
You can use a wire to remove hair or any compacted dirt. You must bend the wire into a hook and then insert it into the pipe opening. Make sure that you can get all of the hair out. Afterward, use soap and water to clean up your drainpipe properly.
2. Use Baking Soda with Vinegar:
Firstly, pour vinegar into the drain. Afterward, add baking powder to it and then close the surface with a cover to let it set for some time. You can use this mixture to clear out any hair or dirt that has accumulated inside your pipe. Then pour water into the drain to rinse all of the debris away. This method works well for both plastic and metal drainage systems.
3. Use Bleach:
Mix bleach in the water and then pour it into your drain. Let it set for at least thirty minutes before you flush it out with water. Ensure that no active bleach solution is left inside the pipe to prevent corrosion or rusting metal parts.
4. Use A Plunger:
A plunger works excellent for a slow-running drainpipe. You can use it by pouring it over the drain opening and pouring water to fully cover the plunger’s rubber bulb part. Afterward, press down on the plunger repeatedly till you see some clearance in your drainage system.
5. Drain Cleaning Machine:
A drain cleaning machine works well for clearing out any hair or other compacted dirt that might be stuck inside your drainage system. You should use this tool as per the instructions and pour water into the pipe to rinse all the debris.
6. Use a Flat Wire:
You can use a flat wire with squared teeth to help you scrape off any dirt or grime that might have accumulated within your drainage system. Afterward, pour water into the pipe to flush out all of the debris through your drainage system.
7. Use Steam:
Steam is a great way to clean out the debris inside your drainpipe. You will have to pour water into your pipe and then introduce Steam into it too deep to clean the drainage system. Afterward, you can flush out your drainage system using water.
8. Apply Soap and Hot Water:
You can use a hosepipe to pour hot water and soap into your drainage system. Afterward, let it sit for some time and flush the debris away with hot water. This method works well for both metal and plastic drainage systems.
9. Use a Toilet Plug:
A toilet plug can be used to flush out any dirt or debris that is stuck in the drainage system. This method works well when your pipe is clogged with hair or other fine debris. You will have to put the plug into your drain opening and then pour water over it until all debris has been washed away.
10. Use a Rope:
You can use a rope to clean out any hair or debris that is stuck in your drainpipe. Firstly, tie a knot at the end of the rope and then put it deep inside your pipe to catch any loose debris that might be stuck there. You can then pull out the knot by using the rope.
Tips to Maintain Split AC Drain Pipe:
1. If the drainpipe gets clogged due to dirt, flush it with water after cleaning.
2. Do not use harsh chemicals or acids for cleaning.
3. If the drainpipe gets clogged due to falling debris, replace the section of the pipe which has fallen.
4. If the water leakage occurs through drain pipe joints, tighten the joints with a brush.
5. If you find holes in any section of the drainpipe, replace that particular section.
6. Never flush hairpins and other such items through the drainpipe to avoid clogging.
You Can Check It Out to Install Heat Tape on Pex Pipe
Conclusion:
In this blog post, we’ve shared tips on cleaning split ac drain pipes. You can use these simple steps to avoid costly repairs and keep the outside of your home looking great! However, when your split ac drain pipe is clogged, it can lead to a major headache.
The best way to clear the blockage and avoid having this problem in the future is by hiring an expert for help. If you have any questions about the process or if you need assistance with other plumbing projects around your property, please contact us for more information.
