How to Make Exhaust Quieter Inside Car
Some people are not fans of the loud sounds coming from their car exhausts. These noises, which can be annoying or even painful to one’s ears, are also a source of pollution. The good news is that there are many ways to make your exhaust quieter inside your vehicle and reduce emissions simultaneously. This blog post will cover some simple tips for making exhausts quieter inside a car without sacrificing performance.
A common problem with car owners is how noisy and smelly their cars become when they drive around town daily. Unfortunately, this often results in increased noise pollution and increased rates of air pollution as well, which can affect people’s health directly through inhalation and indirectly by increasing asthma prevalence in children. Read on to know more information!
8 Reasons Why You Should Make Exhaust Quieter Inside Car:
1. Prevent hearing damage to occupants of the car due to excessive external sound pressure levels.
2. Improve the acoustic environment inside the car for a more pleasant driving experience, especially during long trips.
3. Your car stereo will sound more powerful due to having a better bass response, among other things.
4. If you are running an aftermarket exhaust system that is loud, this will help with the cabin drone problem
5. You can enjoy your sweet ride without annoying all your neighbors or people on the street.
6. Make it easier to hear high-pitched sounds like police sirens, which automatically lowers the chance of getting a speeding ticket.
7. Your sweet ride will be much cooler if nobody can hear you coming from a mile away, even in small cities or towns.
8. You won’t have to deal with non-car enthusiasts complaining about the sound of your car when they get in your vehicle after it has been parked for days or weeks at a time.
Tools and Supplies You’ll need:
- Door Weatherstripping
- 3M Super 77 Spray Adhesive
- Foam Weatherstripping
- Scissors or Exacto Knife
Instructions: How to Make Exhaust Quieter Inside Car
First, cut your foam weatherstripping into 9″ sections using scissors or an Exacto knife. This will make it easier to work with. Then, adhere the sections to the door frame.
The foam should be lined up with the edge of the door and overlap the hump in the middle. This hump is so that you can put pressure on it to make sure it’s completely closed when you shut your door. So, again, line up your foam with this so that it won’t pull the foam up when you shut your door.
Now, trace out where to cut the weatherstripping with a pen or pencil so that you’ll be able to get it around this hump in the middle of the door without too much trouble. Again, if you’re working with a rear-wheel-drive vehicle, the hump should be pretty close to one of the top corners.
Now it’s time to start adhering to your weatherstripping. Spray the door frame and the back of the weatherstripping lightly and wait 10 seconds for it to set up a little bit until it’s tacky. If it’s not, spray some more and wait a little longer. You want it somewhat sticky to adhere to the door frame but not wet enough for it to spill over onto the door itself when you press down on it.
Press down on your foam with one hand while spraying another section of weatherstripping with Super 77. Line up the foam and press down on it firmly to make sure it’s going to stick. Continue spraying, pressing, and tracing out your lines until you’ve reached a corner or end of a side of the door frame.
After you’ve traced out all of the weatherstrippings along one side of the door frame, place a strip of 3M weatherstripping in between the two sticky strips to hold them together. That way, when you continue tracing out on the other side, there won’t be any gaps or spaces where air can slip through. This will make it more difficult for sound to escape from inside of your car and will make it a bit quieter.
Do the same thing for all of the other sides of your door frame, and you should be done! It’s also a good idea to spray some on both sides of each strip where they meet so that there aren’t any points where air can sneak through.
Now, spray a section of door weatherstripping and put it on the car. Line up your foam so that it overlaps onto the car slightly, and trace out where to cut it so you can get around all of the curves in the body. Leave about 1/2″-3/4″ extra when cutting this one on each end. It makes it easier to work with, and you can always trim it later if you need to after adhering to it.
You Can Check It Out to Ground a Wire in a Car
Tips to Maintain Your Car Exhaust:
1. Keep the car in a well-ventilated area. The exhaust is a boiling part of a car, and keeping it cool will prevent harm to you and your car.
2. Inspect your exhaust system for any leaks, holes, or defects in workmanship. These can cause noise from the flow of gases escaping from them when driving at high speeds.
3. Check your exhaust system for kinks, bends, and corrosion in the metal. Tighten any loose nuts or bolts to prevent further damage from vibration when driving.
4. Make sure that all necessary gaskets are in place. These can be very important in keeping heat and noise down to a minimum inside the car.
5. Check your exhaust system for cracks, holes, or missing heat shields. This can lead to rusting if moisture can get inside the car, where it will corrode metal.
There are many ways to make your car’s exhaust quieter. The key is finding the best solution for you and your specific vehicle, so be sure to research before making any changes! For example, the sound inside a car can be reduced by adding insulation to the floor, ceiling, and side panels.
If you are still concerned about the noise levels in your vehicle, try using an acoustic-absorbing fabric on top of carpeting or other materials that make it quieter for everyone who’s riding with you. Keep these tips handy, so when people ask how to make exhaust quieter inside a car, you have some great ideas! If you have any questions or concerns about this article, please feel free to contact us.