How to Add Doors to Cube Storage

March 2, 2023 0

There are many different kinds of storage units available. From stackable wire shelving to rolling carts, there is a unit that will work for your space. However, if you’re looking for a little more protection and order than just stacking or rolling things around, then you may want to consider adding doors to cube storage.

This article can help you on how to add doors to cube storage and decide how much door space is ideal, then show you step-by-step instructions on how to install them!

Things You’ll Need:

Tablesaw
Miter saw or circular saw
Hammer drill
Wood screws
Magnetic drill bit
Two hinges
One door handle or knob

Instructions: How to Add Doors to Cube Storage

Step One:

Get the measurements of your cube by measuring from one edge all the way around. This will give you an idea of how much space is in that row or column.

Step Two:

To find the height of your door, measure from the top of one cube to where you want the bottom of the door to be, then add about six inches for clearance. The size of your cubes and what you’re storing inside them will affect the height of the door.

Step Three:

Measure the width of your door. You’ll want to measure from one edge all the way around, so you have an idea of how much space is in that row or column, then about three inches wider than each cube for clearance when it swings open.

Step Four:

Cut out your door from your desired material with a saw, or ask someone to cut it for you. Position one side of the door against the wall, flush up against the last cube in that row or column. Use construction adhesive and screws to attach your door so it won’t fall off.

Step Five:

Place the other side of your door next to it so that one is flush against the last cube and the other end is just past where you want your first row or column. Measure how much space there is between your two pieces of material, then add about three inches for clearance when this new row or column swings open.

Step Six:

After measuring out a rectangle that is four inches taller than what you need, use a pencil to mark it out on the material. Cut it out with a jigsaw, making sure to leave an opening for the door handle. You can either install an existing handle by drilling into both pieces of material at once, or make your own by attaching two pieces together.

Step Seven:

This is instructions for adding a third piece to two existing pieces in order to create a door that swings open and closed. The new piece should be placed between the two existing pieces, and the door should be able to swing without touching either of the other sides. The size of the new piece may need to be adjusted, depending on the size of the existing pieces, but it is important not to cut too much space out of the other side so that the door can swing freely.

Step Eight:

After you’ve inserted your new piece of material between them and it’s in position, drill a few holes on opposite sides from one another about half an inch away from the top edge of each cube. Make sure they’re in the center of the side you’re drilling away from, or your door will be off-balance.

Step Nine:

Insert a screw into each hole and tighten it down tightly in place with pliers. Test to make sure that the door can open all the way without touching any other pieces on either side, so you don’t need to cut them out.

Step Ten:

If the door is long enough, drill holes in the top corners of each cube and insert screws at a forty-five-degree angle into them. Use pliers to tighten them up until they’re snug against the wood so that when you open and close it, nothing will catch on anything else.

Step Eleven:

If your door isn’t long enough, you can use a steel bar or a thick piece of metal as an anchor. Attach it to your door with screws through pilot holes. Measure how much you need to trim off each end so that when the door is closed, its edge doesn’t touch any other pieces on either side. That way, when it slides open, the edges will be flush with the cubes.

Step Twelve:

Trim off each end of your door to make them even, then place one on top of a piece of wood like you’re creating a sandwich. Clamp it down in both corners as well as on either side if you want extra security.

Step Thirteen:

Slide the door up against your piece of wood. If it’s long enough, you can nail it into one side and then onto the other so that there are no gaps between them. Alternatively, if your door is too short or thin to use this method, attach two pieces of wood together with a hinge in order to create space on the other side of your door.

Step Fourteen:

Lastly, Slide it back in place against the cube and measure from the top for a pencil mark to make sure that when you put screws into them, they’ll go through both pieces of wood as well as both sides of your cubes.

How Do You Add Doors to a Cube Storage?

Adding doors to a cube storage system is an easy process that will help add style and structure to the overall look of your room. To begin, you’ll need to choose a storage system that fits the size and type of door you’d like to include.

Then, you’ll simply attach the door with screws or hinges, depending on what type of hardware comes with your storage system. Once attached, use a level and wall anchors if necessary to make sure your new door is level and secure. Finally, add any necessary decorative elements such as drawer pulls or handles. With some simple steps, you can easily add a door to any cube storage system in your home!

How Do You Add Doors to a Cube Storage?

What Should Be Stored In Cube Storage?

Cube storage can be a great way to de-clutter and organize your home or office. Here are some of the top items that are commonly stored in cube storage:

Clothing & Accessories: These could include sweaters, shirts, pants, hats, purses, and belts.
Books & Magazines: Keep your books both organized and easy to find with cube storage.
Office Supplies: Pens, paper clips, staplers – these are all perfect for storing in cubes!
Toys: Small toys can be neatly stored in individual cubes.
Craft Supplies: Paintbrushes, glue, beads – cubes make it easy to keep all of your craft supplies together in one place.

Conclusion:

If you’re looking for a way to make your storage space more functional, consider adding doors. Doors can be an effective solution if you have limited floor space or are working with cubes that don’t come equipped with them as standard features. You can find great pre-made storage cubes at stores like Target or Ikea and then add doors with hinges on the back so that they create an enclosed space for any room in your house.

Once you have these installed, just fill them up with anything from toys, clothes, or cooking supplies. We hope this blog post on how to add doors to cube storage has helped inspire some creativity around organizing your home. If you have any thoughts on this topic, let us know in the comment section below.

You may read also How to Put Doors on a Bookcase