How to Fix Small Hole in Window Tint

Are you wondering how to fix small hole in window tint? Tinting is the best way to avoid the heat of summer and the cold of winter. It also protects against UV rays, which may lead to skin cancer or other conditions.

How to Fix Small Hole in Window Tint

But what happens when you have a little hole in your window tint? Well, don’t worry! Here we have given some ways that you can fix this problem.

10 Ways on How to Fix Small Hole in Window Tint

1. Remove Air Bubbles: 

Some bubbles may develop in the tint, which can be removed with a pin or needle. First, take a small tool like tweezers and push it into the bubbles. Then pull it out again after you have pressed on the bubble. Another way is to take something flat, put it over the bubble, and then work from side to side until all bubbles are gone.

2. Apply Heat:  

Put aluminum foil behind the hole and heat it with a blow dryer for about 15 minutes. Be careful not to touch the tint, as this may cause discoloration or remove the adhesive on the window itself! Remove the foil when it is hot, and let it cool for a while. Then put it back over the hole and make sure the foil covers the entire area.

3. Cover with Tape:  

Put a piece of tape behind that place to cover up any holes, then apply heat; remove when hot. This works in the same way as using metal foil!

4. Use Window Tint Kit:  

You can get a kit to patch up any holes by buying some tint kits online or from your local home improvement store. The kit will come with everything you need to fill up the hole to be barely noticeable.

Using Window Tint Kit

5. Use Dye:

If you have no adhesive left over, try dye that is specific for car windows! Mix one teaspoon of dye per quarter cup of water; then apply the mixture to the discolored area by using a paintbrush. Let it dry, and you can repeat this step; if necessary.

6. Apply Low-Temperature Glue:

Low-temperature glue will work well to fix the hole in your window tint, but this method is not as effective as using tape or foil. Instead, apply the glue to the entire area where the window tint is bubbled. Let it dry overnight, and then apply a layer of clear coat over the glue; let that dry as well.

7. Use Heat Gun:

A heat gun can also be used to fix a small hole in your window tint, but again, this method is not quite as effective as other methods. Instead, heat the area by using a heat gun, and then press it to the tint with your fingers until it is dry. Repeat if necessary.

Using Heat Gun To Fix Window Tint

8. Apply Iron-On Patch:

To do this, create your own iron-on patch to apply on top of the hole! Take a piece of cardboard with plastic on one side, and cut out a shape of your choosing. Peel off the plastic and apply it to the hole in your window tint. Then heat the iron and place the patch on top of the hole; let it dry overnight before peeling off!

9. Apply RTV Silicone:

The RTV(room temperature vulcanizing) is an effective way to fix a small hole in the window tint! The silicone can be easily applied with your fingers, and it takes about 15 minutes to dry up. Let it dry completely before applying heat because this will help the adhesive stick better. Another advantage of using RTV silicone is that you can easily repair other window issues, like a broken seal!

10. Apply New Adhesive:

Finally, if none of the aforementioned methods work for you, do this last step to fix a small hole in your tint! Get some new adhesive and apply it on top of the removed portion; let it dry up before applying heat.

Tips To Prevent Small Hole in Window Tint:

  • Don’t open the window tint when there is something sharp around.
  • Clean your window before you apply the tint. That way, it won’t be so dirty after you clean it up later on.
  • Before you spread out the tint, make sure to wash it and let all of the soap suds run off of it.
  • When you are spreading out the tint, try to keep it as smooth as possible so that there are no bubbles and creases in it.
  • Use a squeegee on the tint to eliminate air bubbles.
  • Never use a razor blade or any sharp object to remove dirt from your window. That can cause a small hole in your vehicle’s window tint.

How To Re-Glue Window Tint?

If you have a small hole in the window tint, where the glue has come loose from the glass or the silvering, then you may be looking for an answer to repairing it. Of course, the easiest way is to re-glue it yourself, and here is what you should do if you want to fix your own window tints. To properly repair the hole, you need to start by cleaning it with a solvent made for window tinting. You can use any solvent that is non-toxic and will not leave any residue behind when applied.

Shake the bottle well before using it on your window tints and spray it directly onto the tint film. You will want to spray it onto both the glass and the silvering because it is the best way to cover all the sides completely. After spraying the solvent onto the window tint, use a soft rag or cotton ball and rub it so that the area looks clean. Let the solvent sit for about 15 minutes before you continue. When using any glue to re-glue your window tints, you want to make sure that they are safe for automotive applications.

Conclusion:

As you can see, there are many ways on how to fix small hole in window tinting. It’s really up to you how much work/effort and money you want to put into the solution of your problem. Whether it be an easy DIY project or hiring someone with more experience, these solutions will help keep your car looking great for years!

We hope this article has been informative for you in fixing the small hole in your window tint. If not, please let us know of any other questions or concerns that we can help with, and we will be happy to do so.

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo