How to Make Vinyl Stick to Plastic


Many processes can be used to make vinyl stick to plastic. All these methods have some common steps, and today, we will exhibit those steps for our readers. This will allow you to learn how to make vinyl stick to plastic. We assure you that this technique will be highly beneficial for you. The steps included in the process are stated below with a proper explanation.

How to Make Vinyl Stick to Plastic


Step One:

Plastic is always a challenging surface for stickers because it is very slippery. So when you want to stick a vinyl decal to the plastic surface, you need to do a couple of things. At first, you need some elements for the process. You will need a fresh cloth and an alcohol pad. This is much needed for cleaning the surface. And you will need the vinyl decal and a piece of plastic card.

Step Two

Now, you have to take the plastic surface you want to put a vinyl decal on and then clean the surface using a fresh cloth. After the fabric is used, you have to take out the alcohol pad and wipe the surface. This is much needed because the fingerprints and the germs will also be eliminated using an alcohol pad. Now you have to take the vinyl sticker and, using a plastic card, rub it swiftly against a surface. This helps the vinyl to get appropriately detached.

Step Three

Now, you have to place the vinyl on the plastic surface and rub it continuously against the body. You have to sand and try to take off the sticker. You should not apply force on the total area. Just the area you want to peel off should be rubbed. In this manner, the vinyl will gradually stick to the plastic, and the work will be done.


  • Avoid using rubber cement, as it will dissolve the plastic.
  • Do not use vinyl to make a tight seal over any part of your body that is moving or changing size.
  • If you are applying vinyl on top of another adhesive material, be sure they have thoroughly dried before application.
  • To speed up drying time, place an object with high heat capacity, such as iron, near the area being pressed together for about 15 minutes. In addition, wait at least three hours after painting before adhering anything else to the surface, so the paint does not peel off when pressing down on air bubbles and filling gaps between pieces of tape or other materials used in the installation process.

Is Alcohol Suitable For The Process?

Many people believe that alcohol is the best option for removing sticky residue from the vinyl. It can be used in a number of ways, but firstly it should be sprayed directly onto the plastic surface and left to soak before wiping off with a damp cloth or paper towel.

This will not only remove any dirt or debris along with the adhesive glue but also allows you to easily rub away at any remaining chunks of stubborn material without damaging your flooring. However, if this does not work, then an InvisaStrike pad can be employed by simply rubbing over the area until all traces are gone.

Which Cloth Will Help The Process?

Microfiber Cloth:

This is the best cloth to use for vinyl sticking to plastic because it is made of a fabric that attracts dirt.

Dry Erase Markers:

These can be used on smooth surfaces like glass or glossy plastics and will also work with low-tack adhesives.

Lint Free Tissues:

For rough materials, this helps the adhesive stick better. It is also useful for cleaning up dust before you start your project.

Masking Tape:

Use masking tape as needed when trying to cover an area while using low tack adhesives such as glue sticks and double-sided tapes, which are typically not recommended with high-quality vinyl. Still, they do work well in certain circumstances, so know what you’re getting into.

Paper Towel:

This is a great way to remove any leftover adhesive after the project has been completed.

Ruler or Straight Edge:

Useful for measuring and cutting when dealing with vinyl that needs an accurate finish line like stickers, decals, etc.

Why Use Plastic Card For This Process?

If you are looking for a long-term and durable solution, then using a plastic card is the way to go. This process has been around for years. The adhesive on the back of vinyl will react with the heat from your hands and water, which creates an instant bond that can withstand cold temperatures all winter round! Apply it in layers so that there’s extra protection against wear and tear too.

Final Thoughts

In conclusion, we hope that the technique we have stated here has been much helpful for you. The beginners can learn to do new things through this method, and we are quite hopeful that this technique will make it easier for you to attach the vinyl to the plastic. Thank you for your precious time. Have a nice day!

you may also read now 

We will be happy to hear your thoughts

Leave a reply

DIY Quickly