How to Remove Front Cover of Frigidaire Window Air Conditioner

The Frigidaire Window Air Conditioner is a product that has been on the market for many years and continues to be one of the top sellers in its category. It’s easy to see why when you consider how efficient, convenient, and affordable it is.

However, there may come a time when you want or need to remove the front cover from this unit because it needs service or repair work done. Fortunately, with these, we will walk you through some steps on how to remove front cover of frigidaire window air conditioner so that you can get back up and running quickly! 

How to Remove Front Cover of Frigidaire Window Air Conditioner

Things You’ll Need to Remove Front Cover of the Frigidaire Window Air Conditioner

Once you’ve decided that it is time to remove the front cover of the frigidaire window air conditioner, the next step is to make sure that you have all of the necessary tools and components available. Here are some items:

  • Phillips Screwdriver – You will want a Phillips screwdriver in order to disengage the screws from the casing of the AC.
  • Ether-based Lubricant – When you remove the front cover of the frigidaire window air conditioner, there will be some friction against the metal and plastic moving parts of the unit. A bit of this lubricant will keep it from screeching or grinding as you work. 
  • Screw Extractor Set – If any of the screws strip out, you may be able to get them started again with a screw extractor.
  • Punch – If one of those extractors doesn’t work, you can remove the front cover of the frigidaire window air conditioning unit by drilling and punching out the damaged screw. 

Instructions: How to Remove Front Cover of Frigidaire Window Air Conditioner 

Step 1:  

Locate the front panel by looking at the side of your unit.  You should find the panel on the side that has a black grill.

Step 2: 

Remove the screws from the top and then gently pull up to remove the control panel. If it doesn’t come off easily, check for more screws or clips holding it in place. Put them out of reach so that you don’t lose them.

Step 3: 

Disconnect the wires to remove the front panel. Remove all of the visible screws, and then pull out the sides so that you can get in between to disconnect the wire connections. You should notice two pairs of these wires attached to clips, one on either side of your unit’s inner wall. Removing them will allow you to remove the front panel. 

Step 4:   

Press tabs on either side of the inner wall and gently pull it out. This will give you access to the parts that are attached to the sides of your unit. These include all of your filters along with heating elements, vents, and fans. You can now replace any parts you need to reattach the panel. 

Step 5:  

Put the wires back in place, and then put the front panel back on your unit. If you hear any snapping sounds when you do this, stop and check for more screws that you might have missed or clips that didn’t come loose with the other ones. Replace those and then put the screws back in place. You should now be able to use your window unit again!

Step 6: 

Turn on your air conditioner and check for any problems. If everything looks fine, and it almost certainly will, you can now set the thermostat back to normal and enjoy some cool air! 

Turn on Your Air Conditioner  and Check for Any Problems

Tips & Warnings

  • It’s always a good idea to wear work gloves when handling components of your air conditioner, especially the sharp edges on the front panel. Otherwise, it might be possible to cut yourself even through the gloves!
  • Be careful not to squeeze or bend any wires while you’re taking off the panels. The insulation could be damaged, and you could cause a short circuit that will disable the unit. 
  • Be very careful when replacing the wires back on your unit’s inner walls as well. The clips and wiring components are fairly fragile, so you don’t want to break them off or misplace them during this process!
  • If you do break anything, make sure you put everything back in place the way it came off. It could save you a lot of time, headaches, and money down the line!
  • If you have any pets or small children around the house, it’s a good idea to keep them away from the area you’re working on. Failing to do so could result in injury to your kids or your animals!

Frequently Asked Questions

Should You Cover Air Conditioner Unit?

No, you should not cover the air conditioner unit because it will only cause more damage to the unit. The best thing that you can do is to find a reputable company that can help you get rid of your old and damaged AC unit.

Can You Spray Your Window Ac Unit With Water?

Spraying the AC unit with water is not a good idea. Here are some of the reasons why it’s not a good idea:

1. The condensation will cause mold to grow and can damage your unit.

2. You may be drying out the inside of your AC unit, which could make it break down faster than normal and cause more issues for you in the future.

What Happens if You Run AC With Cover on?

If you run AC with cover on, the following will happen:

1. The coil will be heated, and the air conditioning will stop working.

2. When the temperature reaches a certain point, it may cause a fire in your car due to heat buildup in the engine compartment.

3. A spark could ignite fumes from gasoline or other fuel sources that can result in an explosion or fire inside your vehicle.

Will Rain Damage a Window Air Conditioner?

Yes, rain can damage a window air conditioner. Rainwater that comes in contact with the window unit will not only reduce its efficiency but also cause mold and mildew to grow on the evaporator coil.

The following are some tips for keeping your window air conditioner from getting damaged by rain:

1. Make sure you have enough space around your unit to accommodate free-flowing water, or it will get clogged up with sediment and become less efficient.

2. Install an overflow tray under the unit to collect excess water so it doesn’t run down onto the floor where it could leak into your home’s electrical system or other areas of your home like the crawlspace below a foundation wall, garage, or basement room.

3. If possible, install a sump pump outside of your home near where you’re planning to place your AC unit so if there is heavy rainfall, the water can be pumped away from around the unit before reaching it.

Where Are the Drain Holes on a Window Air Conditioner?

On a window air conditioner, the drain holes are located on the back of the unit. The units are made with a drain hole to ensure that water is drained from the condenser coils and evaporator coils so that they can work efficiently.

Conclusion

We hope this article on how to remove the front cover of the frigidaire window air conditioner has been helpful. If you require further assistance, please contact an experienced technician. In addition, if you have any questions or comments, please feel free to fill out the comment form below. 

You May Read Also- How to Trick a Thermostat to Make It Colder

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo