How to Remove Oil Stains From Tiles

Oil stains on tiles can be a real pain to remove. But, if they’re not treated properly, they can become permanent fixtures on your floor. In this blog post, we’ll give you some tips on how to remove oil stains from tiles quickly and effectively.

If you have ever had an oil stain on your tile floor, you know how difficult it can be to remove. Oil stains are not only unsightly, but they can also be a safety hazard. But, follow these simple steps, and your floor will look like new again!

How to Remove Oil Stains From Tiles

Summary: In this article, we will show you how to remove oil stains from tiles quickly and easily. By following our tips, you can avoid the hassle and expense of having to replace your tiles. 1. Pour a pot of hot water on the floor below the oil stain and let it soak for a few minutes. 2. Use a cleaner that is specifically designed for oil and grease stains, such as CLR or Mr. Clean Magic Eraser. 3. Rub the cleaner gently into the oil stain with a cloth or a sponge. 4. Rinse the area thoroughly with water. 5. Dry the area completely.

10 Effective Ways on How to Remove Oil Stains From Tiles

1. Grab a Box of Washing Soda:

Washing soda is a powerful tool for removing oil stains and breaking down grease. It’s more effective than laundry detergent, making it a great choice for tough stains.

2. Apply Dish Detergent:

An excellent alternative for removing oil stains from tiles is dishwasher soap, which can be used in pretty much the same way as laundry detergent. Put a small amount of dishwasher soap into the stain, add warm water, and then rub to create a lather. Allow the dishwasher soap to sit on the stain for around 15 minutes, then wipe it off with a damp cloth. If you’re looking for more information about removing oil stains from tiles, you can find many helpful tips and advice online.

First, you should try to remove the stain by blotting it with a clean cloth or paper towel. If the stain is still there, you should repeat this process until you can’t remove any more of the stain. Finally, you should rinse the area thoroughly and allow it to dry.

3. Use Baking Soda & Vinegar:

Another great cleaner for tile grout, baking soda, is one of the best natural cleaning products you can use around your home. Mix baking soda with water into a paste and apply to stains, scrubbing it in to help remove oil that has sunk into the pores of the tile. Tile flooring can be an elegant, high-end addition to your home. Tiles can also last for a long time, as well as provide good value for your money.

Once you’ve rubbed the baking soda into the stain, apply a distilled white vinegar and water mixture. This will help break down the oil residue left behind by the baking soda. After allowing the vinegar and water mixture to sit on the stain for 10 minutes, you can then run your carpet cleaner over the area to pull out any residue.

4. Use WD-40:

WD-40 is a great product for removing many different stains from surfaces throughout your home as it has a wide range of applications. Just spray it on, leave for a couple of minutes, then wipe away with a clean cloth or paper towel. Repeat until the stain is gone.

5. Degrease With Lighter Fluid:

Lighter fluid has long been effective at removing oil stains from surfaces like concrete and tiles, thanks to the ingredients in it that break down oils. Pour some onto an absorbent cloth, then use it to rub into the stained area until no more stain is being removed. Repeat until you’re happy with the results, then rinse entirely before allowing to dry.

Lighter Fluid Has Long Been Effective

6. Use Rubbing Alcohol:

Rubbing alcohol (or surgical spirits) is another excellent product for removing oil stains from tiles. This is because it also contains ingredients that break down and dissolve oils, which makes it effective at removing different stains, not just oil!

Pour a small amount onto an absorbent cloth, then rub the stained area until the stain has been removed. Repeat until no more stain is being removed and the tiles are clean, then rinse with warm water and allow to dry.

7. Use Peanut Butter:

Believe it or not, peanut butter makes for an excellent cleaning product when you’re faced with oil stains on tiles! This will help break down oils and provide a gentle abrasive action as you scrub. Smear a small amount of peanut butter onto the stained area and allow it to sit for several hours, then wipe or scrub away. You may have to repeat this process a few times before all the stain is gone.

8. Consider Using Ammonia:

Ammonia is very good at breaking down oil-based stains, but make sure you wear protective gloves while working with it. Additionally, ammonia should only be used with certain kinds of tiles or grout types. Make sure you check the tile type on the back of your tiles to ensure it is suitable for use with ammonia before trying this method.

9. Use Laundry Detergent & Hydrogen Peroxide:

You can also try mixing laundry detergent (not dishwasher soap) with hydrogen peroxide into a paste and using that to scrub away stains from tiles. This is a natural homemade cleaning solution that can effectively remove oil stains from your tiles, but make sure you still protect yourself with gloves while working with it.

10. Sponge it Up:

Soak up the spilled oil with paper towels, then use a clean sponge to continue wiping away the stain. Rinse thoroughly with warm water and dry with a towel or cloth. You can also try rubbing alcohol to remove oil stains from tiles; apply this straight onto the stained area with an absorbent cloth, leave it sitting for a few minutes, then wipe away. Repeat until the oil stain has been obliterated.

Use a Clean Sponge

You Can Check It Out To Repack a Steam Valve

Some Tips and Suggestions

Here we have given some tips and suggestions on how to remove oil stains from tiles.

1. May be used on white or colored tiles.

2. May use a toothbrush if necessary.

3. Machine made tiles-ensure the stain is not set in by scrubbing too hard and long (if you can feel it still there, then it can come back).

4. Use a steam cleaner to heat the oil (water in the reservoir).

5. Use mineral spirits to remove any residue after all oil is removed.

6. Floor finishes may be affected by machine scrubbing tile floors because of their abrasiveness. Just make sure that it’s not making the tile floor duller when the finish is partially gone.

7. For spot removal, a turkey baster is useful for sucking up the oil and keeping it from going deeper into the tile grout or cracks.

8. Any solvents should be used with care to avoid damage to surrounding surfaces!

Some Things to Consider When Removing Oil Stains From Tiles

1. Take Proper Safety Precautions: Make sure you wear goggles and gloves. In some circumstances, it might be a good idea to wear a respirator as well.

2. Test Your Cleaning Solution: Before you start, test your oil stain removal solution on the part of the tile that is not visible to make sure it doesn’t damage the tile. If there’s no reaction within five minutes, it should be safe to use.

3. Make an Oil Stain Removal Paste: Combine about half a cup of an oil-absorbent powder, like baking soda or cornstarch, with just enough water to form a paste.

Oil Stain Removal Paste

4. Scrub the Oil Stain: Use a scrub brush to work the paste into the tile and break up the stain. Be sure you are scrubbing in the direction of the grout lines so that it doesn’t just push the stain further into the tile. While you’re scrubbing, try to keep the paste wet, so it doesn’t dry out.

5. Test a Small Area First: Before you go ahead and try to scrub the entire tile, test a small area where it won’t be a problem if you accidentally damage the tile.

6. Rinse with Water: When you’ve scrubbed all of the paste away, rinse the whole tile with some warm water to get rid of any residue from the cleaning solution or baking soda paste.


This guide has shown you how to remove oil stains from tiles. You can effectively clean your tile floor and remove any unsightly marks or blemishes by following the steps outlined above. If you want to remove oil stains from your tile floor, we recommend using a mild detergent and hot water.

Let the mixture sit for about ten minutes before scrubbing it with a brush or sponge. Repeat this process as needed until all of the stains are gone. We hope that this information on how to remove oil stains from tiles will help you keep your tile floors looking their best! For more information on eliminating other types of stains from ceramic tiles, please get in touch with us!

Jennifer Branett
We will be happy to hear your thoughts

Leave a reply

DIY Quickly