How to Fix a Car CD Player That Won’t Load or Eject Discs

If you are currently experiencing a CD player that won’t load or eject discs, this blog post is exactly what you need. A number of reasons can cause this issue. One of the reasons can be that the laser eye has been damaged and needs to be replaced, or the gears inside the player have become worn and need to be fixed.

The repair process for both cases is relatively straightforward, so don’t worry when your CD player not working! What’s important now is figuring out which step in the process will work best for your specific problem. Read on below for more information about how to fix a car cd player that won’t load or eject discs!

Car Cd Player

7 Common Reasons Car CD Player Stop Working:

There are many reasons why a car cd player may stop working. Below is listed the 10 most common causes of this issue:

1) Damaged Laser Eye

The laser eye, responsible for reading the data off of CDs, can become damaged or dirty. The laser eye will need to be replaced if it is damaged or cleaned if it is dirty. Without a functional laser eye, your CD player won’t operate properly.

2) Dirty Or Worn Gears

The gears responsible for turning the disc and reading the data from it can become worn out or too dirty for your car CD player to operate properly. If this is the case, they will need to be replaced or cleaned. Of course, how you go about doing so depends on whether your CD player is a “single disc” model or not.

3) Mechanical Problems

There could also be mechanical problems with your car’s CD player. Again, how these are fixed will vary depending upon the actual problem.

4) Problem With Power Supply

Sometimes your car CD player will just be broken, and there’s nothing you can do about it! This is the most common cause of why car CD players stop working, but not the only one.

5) Too Many Scratches

A scratch on the CD can also mess up your car’s CD player. How many scratches it takes to cause this will depend upon how severe they are and where exactly they are located. Sometimes all that is need is a good cleaning, but sometimes you’ll need to replace the disc or even change your whole CD player.

5) Problem With Audio Cables

If your car CD player is working properly, but you can’t hear anything from it, the problem could lay with the audio cables. If they aren’t plugged in properly or are damaged, no sound will be produced by your car’s CD player. How this problem is fixed depends on how many problems are actually present.

6) A Bad Motherboard

Sometimes the CD player will be working fine, but it’s not reading the disc itself. This means that there’s a problem with your car’s motherboard and you’ll need to replace it for your music to play properly again. Of course, how you replace your car’s motherboard depends on the make and model of your specific car.

Motherboard Of Car Cd Player

7) A Bad Disc

Sometimes, even if everything is working correctly with your car’s CD player, you’ll still experience problems with it. How this happens depends on what kind of problem it is. Sometimes the issue will be a bad disc or one that isn’t compatible with your specific type of car CD player.

Things You’ll Need:

The process of repairing your CD player is relatively simple. Listed below are the things you’ll need to make sure that the repair is a success:

  • A Phillips Head Screwdriver (or other screwdrivers if needed)
  • Electrical Tape or Electrical Wire Ties
  • NEW Laser Eye,
  • Spindle Motor Assembly,
  • CD Mechanism Assembly
  • CD Changer or a Universal 10 Disc Changer

Instructions: How to Fix a Car CD Player That Won’t Load or Eject Discs

Step 1:

If your car CD player doesn’t load, two things could be wrong with it. The first thing you’ll want to do is check that the door is all the way shut before going any further. If this doesn’t fix the problem, then remove the car’s head unit and inspect the laser eye. This will vary depending upon your specific CD player model, so check your manual for more information.

CD Mechanism Assembly

Step 2:

If that doesn’t help, then there might be a fault with one of the gears. This will need to be repaired by an auto technician, but they might not charge you that much since it’s just an inexpensive part. In this case, you’ll want to find a shop specializing in fixing car stereos because they will know exactly what needs to be done.

Step 3:

If you’ve checked the above and are still experiencing issues with getting your car’s CD player to work properly, then we’ll assume that you’re dealing with a problem within the car itself. This fix will vary depending on what kind of problem it is, but if you have your car’s manual, then go ahead and check it out. If it isn’t available, then you’ll need to take your car into an auto shop for help.

Step 4:

If you’ve got your hands on the manual for your CD player and still can’t figure out what is causing the problem, then it’s time that you take it into an auto shop so they can check if there is something wrong with it. Of course, it will vary depending on what actually needs to be fixed, but this is the best way to get it back into working order.

Step 5:

If your vehicle’s CD player won’t load or does not eject discs, then you might be dealing with a problem within the car itself. This will vary depending on what kind of problem it is, but if you have your car’s manual, then go ahead and check it out. If this isn’t available, then you’ll need to take your car to an auto shop for help.

Conclusions:

If you’re experiencing issues with your car CD player, have no fear! In this blog post on how to fix a car cd player that won’t load or eject discs, we’ve compiled a list of five ways to fix this problem. Give these methods a try before you take it into the shop and end up paying for unnecessary repairs. If you’re still stuck, then let us know. We will be happy to help you!

You should read also – How to Fix Bluetooth Lag in Car

We will be happy to hear your thoughts

Leave a reply

DIY Quickly
Logo